Operation Manual

ManualsBrandsFunai ManualsLCD plasma TV32FL553P

Switching the Input Source Mode

You can switch the input source mode to TV mode or

external input mode.

1 Press SOURCE .

2 Use Ÿ / ź to select the input mode you want,

then press OK.

46FD753P/39FL753P/32FL553P/29FL553P/

24FL553P

32FL553/29FL553/24FL553

SmartConnect

This unit can display the screen of other device with

MHL function and use the remote control of this unit to

operate it.

During the connection, the device is charged up.

Setup for SmartConnect

You must connect the HDMI cable to HDMI3/MHL input

jack of this unit and micro USB cable to the device with

MHL function (shown below).

1 Press SOURCE to display the input source

mode.

2 Use Ÿ / ź to select [HDMI3/MHL] on the list,

then press OK to display the screen of the

connected device.

3 Release the lock of the connected device and

use remote control to operate it.

Note for SmartConnect

HDMI3/MHL

HDMI2

HDMI1

YPbPr

SCART

DTV

ATV

Media

Input Source

Move Select

Media

HDMI2

HDMI1

YPbPr

SCART

DTV

ATV

Input Source

Move Select

• If you want to exit this mode, select any other input source

mode. Refer to “Switching the Input Source Mode” (p. 9).

• HDMI1 and HDMI 2 input jacks do not accept the function.

• Available features are limited on remote control operation.

• Use HDMI and micro USB cable. If you use any other cable,

we cannot guarantee.

• The connected cable between the unit and a device is not

supplied with this unit.

• We do not guarantee the device with all MHL function can

be supported on this unit.

• Funai cannot be held responsible if your device is not

supported, nor will Funai accept any liability for damage or

loss of stored data.

• Be sure to keep a backup copy of the original files on your

device before you play them back on this unit. We have no

responsibilities for damage or loss of your stored data.

• To avoid damaging the connecting device and the unit

always turn off the unit before you unconnect the cable.

• When the unit does not recognise the connected device, try

reconnecting it.

• For details, please access: http://www.mhlconsortium.org/