OWNER’S TRANSYLVANIA IR 13-INCH COLOR TV/VCR 3913CLC This Owner’'s Manual is made of recycled paper.
PRECAUTIONS Coir safe operation and satisfactory performance of your TVIVCR, keep the following in mmd when selecting place for its installation: & Shield it from direct sunlight dnd keep it way from:: sources of intense heat. ® Avoid dusty or humid places. o Avoid places with insufficient ventilation for proper Ti eat dissipation.
TABLE OF CONTENTS W IMPORTANT SAFEGUARDS W PRECAUTIONS.. 4 LOCATION ©4 AVOID THE HAZARDS OF ELECTRICAL SHOCK BAND FIRE G0 s WARNING .. i W M SUPPLIED ACCESSORIES (i iicriiimirsian 6 M VIDEO CASSETTE 7 W OPERATING CONTROLS AND FUNCTIONS, 8 W PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS 1 10 INSTALLING THE BATTERIES .
FEATURES » Infrared remote control »:Bilingual on screen menu display delectable in Tighten or French o Real time counter—This shows the elapsed recording: or playback time in hours. minutes,and seconds. The et indication: will appear when the tape 18 rewound further than the tape counter position “0:00:00% 181 channel capability PLL frequency synthesizer tuner with direct station call= (A Son verier may be necessary to view scrambled cable channels.) .
OPERATING CONTROLS AND FUNCTIONS NOTE: ® Weed not recommend the use of universal emote controls. Not all of the functions may be controlled with-a universal remote control. 1 you decide to ise a universal remote contra with this uni¢; please be vitreous that the code number given may. ot operate thingummies Tn this case; please call the manufacturer of the universal remote control: ~ TVIVCR FRONT PANEL 5678910 EMOTE CONTROL « 1 EARPHONE jack Connects to earphones (hot supplied for personal listening.
PREPARATION FOR USE VOUCHER COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna:into:the hols on the. upper-hack portion ol the TV/VCR, Connect: the: VHE/UHFE Rod Antenna: or HEAVE Combination Antenna to: the: ANT. terminal of the TVIYCR s shown in the diagram below: For the best reception: fully extend the: VOUCHER Rod Antenna and make:the necessary adjustments: (Avoid touching the top Section when adjusting.
CABLE WITH CONVERTER/ SCRAMBLER BOX OR SATELLITE BOX 1 your cable service supplies you with 4. Converter box orifice noses satellite system; you can use: the Basie connection shown here. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box: This means that ‘channels cannot be changed using the TV/VCR Remote Control: Unattended timer recording is Baited o one channel teatime.
SET UP FOR USE You can program the tier 1o scan all the channels you receive in your arcs: You must use the remote control for the this procedure: NOTE: Channel memory programming i NOT needed interconnected to:a cable box or satellite box Just select (ke TV/VCR channel selector 1o the output channel uf the cable box or satellite' box (Ex CH. Then select the: channel to be viewed on the Cable Box or Satellite Box. 1 Pius in the TY/VCR power cord Plug the TVIVCR power cord inland standard AL outlet.
MANUAL CLOCK SETTING Make sure #: Use the remote control fox this procedure, & RIVETER power must be muted on I the example below; the clock s 1o by set 1! DATE March: Ist, 1999 SETTING TIME: 1 5:40PM 1. Select "SETTING CLOCK” Press the MENU button: T Press the PLAY/A or DYSTOPI. assess button {pointillist \SETTING LTI CLOCK", oM L ‘Hen; press the FOOD» bison: 2 Select "MANUAL CLOCK SETT Press: the PLAY/A& or STOP/Y.
ON SCREEN DISPLAY Ta check the Counter. Clock and: Channel number ion: the TV screen; pressie: DISPLAY: button: on the remote control Each ime vou pres tithe DISPLAY Button on the roofer control; the TV screen will chance 15 follows: When the Closed Caption mode s OFF: OFF mode Counter made Clock mode & Counter mode: After 3 seconds, only 1he counter remains. To clear it; press the DISPLAY button. * Clock adenine; After S seconds; only the clack and the channel number cremains.
TV OPERATION PICTURE CONT 1. Turn on the VCR Press the POWER button to turn ion the CRAVAT: 2 Select the channel number Press the CHANNEL ‘& or W baton to select your desired channel number of pass the number buttons on: e remote ool Remember: If the TV/VCR is connected 1o a cable box or satellite box, the TV/VCR must be op CH3 or CHY, hen the channel to be viewed must be selected on the. cable box of satellite box.
PLAYBACK Make sure * CRAVAT power must be endowment) 1 instant s prerecorded tape 1E the erase-protection tab hag been removed, the VINCENT will start playback automatically: 2 o begin playback Pressie PLAY button: 3 1o stop playback Pressie SOFT button when playback is completed. e, ® Tracking adjustment will be:set automatically (Digital Tracking function) when you start playback.
SPECIAL PLAYBACK Make sure .. » {Ise the remote control for this procedure. ® TY/VCR power must be muted on. ® Inserts prerecorded tape, * Be lore playback; follow steps below. This function enables you improve the picture duality when placing back worn cassettes such ay rented lapse. T Select "USER'S SETUP" Press the MENU button.
5 Set beginning hour. Press the PLAY/A& or STOP/W. button until the desired hour appears: (Example: " 7.PM* for T 30PMy Then; press the EEWD/M button: 6 Set beginning minute Press: the: PLAY/ or STOP/W button until: the:desired: minute appears: (Example: 130" for F:30PM) [hen, press the EFFENDI tuition: 7 St end hour Press the PLAY/ & or STOP/W button boil the desired hour: appears. (Example: "8, PM” for B:50PM) “Thins, press the LEWD» button. B et end minute Press the PLAY/A 0t STORY.
TROUBLESHOOTING GUIDE H-you Have followed the instructions: contained in this manual and Rave difficulty in operating your NECROTIC: lactate the PROBLEM in the columnar below: Check the corresponding CORRECTIVE ACTION colorblind to remedy the problem: PROBLEM CORRECTIVE ACTION No power. * Make sure the AC cord is connected 10.an AC varlet: & Make sure‘the power 18 firmed on, No picture and sound. ® Make sire the'AC cons is connected 1© an AC outlet, * Check antenna connection.
