Operation Manual

18 EN
4. BEFORE YOU START
4.1 Finding the Viewing Channel
/ Source on Your TV
After you have completed all the connections,
you must find the viewing channel (external
input source) on your TV.
1 After you have made all the necessary
connections, press [STANDBY/ON Q] to
turn on the unit.
2 Turn on your TV.
3 Press the button on the TV’s remote control
that accesses the external input channel. It
may be labelled “SOURCE”, “AV”, “AUX”
or “SELECT” (refer to your TV’s user
manual).
This is the correct viewing channel (external
input source).
• If the TV is connected by an HDMI cable,
it may take a while for the opening picture
to come up.
• If a certain amount of time has passed
since you turned on the unit, welcome
screen appears for the first time you turn
on the unit.
4.2 Initial Setup
Please follow the instructions below to
complete the initial setup.
1 While welcome screen is displayed, use
[K / L] to select “Next”, then press [OK].
2 Language setup screen will appear. Use
[K / L / s / B] to select your language,
then press [OK].
3 “Quick Start Mode” screen will appear. Use
[K / L] to select the desired mode, then
press [OK].
4 “Automatically check for latest software”
screen will appear. Use [K / L] to select
the desired mode, then press [OK].
5 Network setup screen will appear. Use
[K / L] to select the desired mode, then
press [OK].
• If you select “Auto”, refer to “Auto” on
page 39 for further information.
• If you select “Manual”, refer to “Manual”
on page 39 for further information.
Language
Български
Čeština
Nederlands
Français
English
Deutsch
Magyar
Italiano
Polski
Romana
Slovenčina
Русский
Español
Please select your language for on-screen
display.