Operation Manual

45EN
6 After updating finishes, this unit will restart
automatically.
C
Caution
• Please do not unplug the AC adapter or
LAN cable while executing the “Network”.
D
Note
• In order to update the software via the
Internet, you must connect the unit to the
Internet and set up necessary settings.
• For the network connection, refer to
“Connection to the Network” on page 16.
• For the network setup, refer to “Network
Connection” on page 39.
• All settings will remain the same even if you
update the software version.
9.6 Initialise
Menus to reset player settings, format USB flash
drive, local storage and clear network settings.
1Use [K / L / s / B] to select “Settings” in
the home menu, then press [OK].
2Use [K / L] to select “Others”, then press
[OK].
3Use [K / L] to select “Initialise”, then press
[OK].
4Use [K / L] to select the desired setting,
then press [OK].
“Reset Settings”:
All the settings except for the parental and
network settings will be reset to default.
“Format USB” (Available only when a
USB flash drive is connected):
Initialise the USB flash drive.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM
contents, such as BD-ROM game scores, on
this player.
“(USB) Erase Saved BD-ROM Data”
(Available only when a USB flash drive
is connected):
Clears the supplemental data for the BD-
ROM playback, such as subtitle data, from
the USB flash drive.
“Reset Network Settings”:
Resets the network setting to the default.
5Use [s / B] to select “Yes”, then press
[OK].
6 Confirmation message will appear. Press
[OK] to complete the setting.
7Press [HOME] to exit.
C
Caution
• Do not remove the USB flash drive while
executing the “Format USB” or “(USB)
Erase Saved BD-ROM Data”. It will damage
the card.
D
Note
• “Format USB” or “(USB) Erase Saved BD-
ROM Data” is not available when a Blu-ray
Disc™ is in the unit.
[HOME] Ȼ “Settings” Ȼ “Others” Ȼ “Initialise”