Introduction Owner's Manual Playback INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Recording NEED HELP FAST? READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE. IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE, YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT. Basic Setup THANK YOU FOR CHOOSING MAGNAVOX.
1 Connections Connection to an External Tuner 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. e.g.) DIGITAL VIDEO DISC RECORDER WITH VIDEO CASSETTE RECORDER AUDIO IN L VIDEO IN R rear of your TV BZV420MW8 Pl a y a b l e Di s cs RF coaxial cable S-VIDEO This unit is compatible to play back the following discs / files. DVD/VCR IN --- AUDIO --- OUT ANT.
2 Initial Setting Press [STANDBY-ON y]. SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 Turn the TV on. Select the input to which the unit is connected. Initial Setup Use [K / L] to select your desired language, then press [OK] to set language. SETUP OK 2 Press [OK] to activate “Clock Setting”. B TITLE A .
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards Recording Playback Editing Function Setup VCR Functions Others Español EN E9E2ZUD_BZV420MW8.indd 3 Basic Setup 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13.
PRECAUTIONS Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Maintenance Servicing Cleaning the cabinet Cleaning discs Cleaning the disc lens Disc handling Auto head cleaning Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Dolby Digital Recording “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs.
CONTENTS Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback Editing Function Setup VCR Functions Others Description refers to audio CD Description refers to video CD with PBC function Description refers to video CD without PBC function Description refers to CD-RW/-R with MP3 files If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media. EN Español E9E2ZUD_BZV420MW8.indd 7 Recording DVD mode Deleting titles: You can delete titles which you do not need anymore.
FUNCTIONAL OVERVIEW Front Panel 1 26 25 2* 3 24 23222120 19 18 17 16 15 14 13 12 11 10 9 8* 7 6 5 4 (*) The unit can also be turned on by pressing these buttons or insert a cassette tape. 1. Cassette compartment (VCR) Insert a cassette tape here. 2. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 3. Disc tray (DVD) Place a disc when it is open. 4. AUDIO input jacks (E2) (DVD/VCR) Use to connect external device with an RCA audio cable. 5.
Introduction FUNCTIONAL OVERVIEW Rear Panel 1 DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT L OUT S-VIDEO DVD/VCR IN --- AUDIO --- OUT Y L L PB /CB IN R R COAXIAL IN ---VIDEO --- OUT R 9 8 7 6 5 43 2 7. COMPONENT VIDEO OUT jacks (DVD only) Use to connect a TV monitor with component video inputs with a component video cable. 8. S-VIDEO OUT jack (DVD only) Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable. 9.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
Basic Setup Recording Playback Editing Function Setup 20. CLEAR button (DVD/VCR) DVD mode: Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the edit menu, etc. VCR mode: Press to reset the tape counter. 21. SETUP button (DVD/VCR) • Press to display the main menu. • During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 22.
CONNECTION TO AN EXTERNAL TUNER This section describes how to connect this unit to an external tuner such as cable/satellite box. VHF / UHF antenna • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 rear of your TV Disconnect 1 2 disconnect Disconnect the power cords of the devices from the AC outlet. or RF coaxial cable Cable TV company ANT. IN Make the connection as illustrated below. e.g.
Introduction SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 o OK s B TITLE RETURN B h i g Use [K / L] to select “Video Input”, then press [OK]. Use [K / L] to select desired external input position, then press [OK].
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device.
Digital Audio Connection 2 Channel Analog Audio Connection stereo system Dolby Digital decoder, MD deck or DAT deck audio Connections digital audio coaxial input jack COAXIAL R Introduction CONNECTION TO AN AUDIO SYSTEM L AUDIO IN digital audio coaxial cable or RCA audio cable DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO Y OUT DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT L OUT PB /CB COAXIAL COAXIAL IN DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT
THE VCR / DVD RECORDER SWITCHING Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE]. DVD mode VCR mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) Press [VCR] on the remote control. (Verify that the VCR indicator is lit.) STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .
This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. The on-screen display changes in the following order as you press [DISPLAY].
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup 1 2 3 4 5 General Setting Timer Programming Title List Disc Edit CD Playback Mode 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. Disc Edit: To set up the DVD disc setting. 5.
Introduction INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 TIMER SPACE CLEAR Turn the TV on. Select the input to which the unit is connected. Use [K / L] to select your desired language, then press [OK] to set language. Initial Setup OSD Language 0 DISC MENU Basic Setup 4 PQRS 1 2 Connections STANDBY-ON Press [STANDBY-ON y].
SETTING THE CLOCK Set the clock before you try the timer programming. Clock Setting STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU 1 2 3 o OK s B TITLE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Clock”, then press [OK]. Use [K / L] to select calendar or time, then press [OK].
Introduction INFORMATION ON DVD RECORDING Before you make a recording, read the following information. Recordable Discs Recording Mode Logo You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. Disc size Attributes DVD+RW 12cm Disc HQ (1Hr) 18 min SP (2Hr) 36 min SPP (2.
BEFORE RECORDING Make Recording Compatible Setting for Auto Chapter You can set a specified time for chapter marks. Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
Follow the steps to record TV programs from an external tuner. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices. SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR Align the disc to the disc tray guide. 0 * Make sure the disc is compatible with this unit. (Refer to page 21 for the list of compatible discs.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING 6 Press [REC I] to start recording. “I” will be displayed for 5 seconds. 7 Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 55.) e.g.) DVD+R I Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. Writing to Disc 90% To set one-touch timer recording (OTR)... This is a simple way to set the recording time in blocks of 30 minutes.
SOURCE TIMER SET DISPLAY OPEN/CLOSE ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 0 JAN/ 2/07 12:00 AM E1 SP SP (1:00) MON JAN/01 11:00AM Date JAN/02 5 1 Title of a timer program (Contains date, time, selected external input position, recording mode of the program) 2 Current date and time 3 Recording mode, and length of the recording 4 Timer program list 5 Total number of pages and current page (2 pages maximum) 1 2 Press [TIMER].
TIMER RECORDING 4 Use [K / L] or [the Number buttons] to enter the start and end time, then press [B]. Timer Programming Auto recording mode select... When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.
Checking, canceling, or correcting the timer programming information 1) Press [TIMER SET]. TIMER REC indicator will light off on the front panel. If the timer program did not complete correctly, the error number appears in the timer programming list. Timer Programming Connections 2) Press [TIMER]. TUE JAN/02 11:00AM 3) Check the information on the list you will need.
TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted, TIMER REC indicator on the front panel flashes and timer recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a recordable disc.
1 2 3 Press [SETUP]. 4 Use [K / L] to select the time, media and recording mode, then press [OK]. Connections Use [K / L] to select “Timer Programming”, then press [OK]. Use [K / L] to select “Satellite Link”, then press [OK].
SATELLITE LINK 8 9 Press [OK]. “To Standby Mode” is highlighted. Press [OK] again. Satellite Link Start DVD VCR Mode 5:00PM DVD SP (2Hr) To Standby Mode In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [TIMER SET] to turn on the unit.
Overwriting from the Beginning of the Title 2) Load the disc that includes a title to be overwritten. Title list will appear. If the title list does not appear, press [TITLE]. 3) Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 21. 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2) Use [K / L] to select “Play”, then press [OK]. Playback will start. 3) Press [PAUSE F] at the point from which you want to start overwriting. 4) Press [REC I].
OVERWRITING UNNECESSARY TITLE Hints for Overwriting When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
Introduction EXTERNAL DEVICE RECORDING Connection to an External Device Connect the external device properly to either E2 (front) or E1 (rear) input jacks of this unit by using S-video or RCA audio / video cables. Connections or S-VIDEO OUT VIDEO OUT AUDIO OUT R L S-VIDEO OUT external device VIDEO OUT AUDIO OUT R L (camcorder, VCR etc.
EXTERNAL DEVICE RECORDING Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 33. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 SETUP o OK s When you want to record to a cassette tape: Press [VCR]. Insert the cassette tape with a eraseprotection tab into the cassette compartment.
To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 TIMER SPACE CLEAR Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 0 SETUP DISC MENU Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup 4 PQRS 1 2 3 Press [SETUP].
PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE 1 2 3 4 Press [SETUP].
Introduction PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing STANDBY-ON A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU o OK s B “Recording” menu will appear. Use [K / L] to select “Auto Finalize”, then press [OK]. Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [OK].
DUBBING MODE You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or the cassette tape is not copy protected. Before starting this function, prepare for the recording on the DVD+RW/+R, DVD-RW/-R or the cassette tape. Refer to pages 22 and 77. Make sure: • Insert a recordable disc and a cassette tape with a eraseprotection tab. Note for recording to a cassette tape: • The cassette tape's erase-protection tab is intact.
VCR to DVD General Setting Playback Display Video Recording Clock Reset All 4 Auto Chapter Auto Finalize Dubbing Mode Dubbing Mode Make Recording Compatible VCR DVD DVD VCR Press [SETUP] to exit. Press [VCR]. Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. Press [DVD]. Make sure to select a recording mode using [REC MODE]. Press [STOP C] to stop the recording.
INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back.
Introduction BASIC PLAYBACK Direct Playback SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR Press [DVD]. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Basic Setup 1 GHI 1 2 Turn on the TV and be sure to select the input to which the unit is connected. Connections STANDBY-ON Press [STANDBY-ON y]. 0 SETUP Align the disc to the disc tray guide.
BASIC PLAYBACK Playback from the Title List STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. 0 DISC MENU SETUP o OK s Align the disc to the disc tray guide.
1 SP (2Hr) 5 NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 Use [K / L] to select “Play”, then press [OK]. Play Edit Overwrite 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 3 EMPTY TITLE 1:37:52 SP(2Hr) EMPTY TITLE 1:37:52 SP(2Hr) 6 Press [STOP C] once to stop playback temporarily. • Refer to “Resume Playback” on page 46.
BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3 Files STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 It may take a while to load the disc completely. SETUP o OK s B TITLE RETURN p B j F Press [OPEN/CLOSE A] to close the disc tray. When an audio CD is inserted, track list will appear. When a CD-RW/-R with MP3 files is inserted, file list will appear.
Using the Title / Disc Menu Pause Press [DVD] first. 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. 3) Press [STOP C] to exit. Basic Setup 2) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection. Connections DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. Press [DVD] first.
SPECIAL PLAYBACK Resume Playback You can play back from where you stopped playing back the disc last. Press [DVD] first. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit. To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped.
Rapid Playback B : B: Press [RAPID PLAY] 3 times to play back in normal speed. No effects. 2) Press [PLAY B] to continue the normal playback. g 1/8x h g 1/16x g pause h h g 1/16x h g 1/8x h 1/3x To return to the normal playback, press [PLAY B]. Note • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx. speed) 1/16x: 1/8x: 1/4x: • Only slow forward is available when playing back video CD.
SPECIAL PLAYBACK Marker Setting Zoom Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video This feature allows you to assign a specific point on a disc to be called back later. Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the marker list.
Title / Chapter Search Introduction SEARCH Track Search Press [DVD] first. 1) During playback, press [NEXT G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. Press [DVD] first. 1) During playback, press [NEXT G] to skip the current track/file and move to the next. The track/file will move forward one at a time.
SEARCH Time Search Press [DVD] first. 1) During playback, press [DISPLAY]. , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD The number next to will be highlighted. To move to the number next to , press [B]. When time search is not available, counter are not displayed. and time 3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK].
Repeat Playback Note , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the selection menu. 1/ 5 1/ 5 0:01:00 / 1:23:45 • Point B for the repeat A-B playback should be set within the same title or track as point A. • To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you stop playback. • You cannot select “Group” during the random playback of MP3 files.
REPEAT / RANDOM / PROGRAM PLAYBACK Program Playback You can program the disc to play back in your desired order. Press [DVD] first. 1) Press [SETUP]. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [OK]. 4) Use [K / L] to select a desired track, then press [OK] or [B].
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack 1/ 5 1/ 5 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. 0:01:00 / 1:23:45 DVD Video 1/ 5 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video DVD Video Subtitle will be displayed in the selected language. When selecting “OFF”, subtitle will disappear.
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. Press [DVD] first. 1) During playback, press [DISPLAY].
Guide to a Title List Editing Discs Press [TITLE]. 2 3 4 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP(2Hr) Note Edit Title Delete 2 Edit Title Name Chapter Mark Hide Chapter Index Picture Title Dividing 0:00:59 11 10 9 8 7 Editing 1. Title list: List of the titles recorded on the disc, and their information. 2. Arrow: Indicating there is a previous / next page. 3.
EDITING DISCS Deleting Titles You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed. 3 Use [K / L] to select “Edit”, then press [OK].
Introduction EDITING DISCS Putting Names on Titles You can put title names on the titles and change the names from this menu. 4 Edit - Edit Title Name 1 Yes No SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR MY FAVORITE 0:00:59 The name you entered will be activated for the title. 0 5 SETUP o OK s B TITLE After this operation is completed, press [RETURN] to exit. Data will be written onto the disc momentarily.
EDITING DISCS Setting Chapter Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 3 Follow steps 1 to 3 in “Deleting Titles” on page 56 to display “Edit” menu. 4 Use [K / L] to select “Add”, then press [OK]. 0 DISC MENU SETUP Use [K / L] to select “Chapter Mark”, then press [OK].
Introduction EDITING DISCS Clearing Chapter Marks SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o B RETURN p B j F h i g C Submenu will appear. Use [PREV H] / [NEXT G] to select a chapter mark to be deleted. Use [K / L] to select “Delete”, then press [OK]. Use [K / L] to select “Yes”, then press [OK].
EDITING DISCS Clearing Chapter Marks (cont’d) STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o OK s B TITLE RETURN p B j F h i g C To delete all chapter marks: 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 56 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [K / L] to select “Delete All”, then press [OK].
Introduction EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP o OK s Submenu will appear. Use [PREV H] / [NEXT G] to decide the chapter to be hidden. Use [K / L] to select “Hidden”, then press [OK].
EDITING DISCS Setting Pictures for Thumbnails You can set your desired scene as a thumbnail for each title. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o OK s B TITLE RETURN 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 56 to display “Edit” menu. Use [PREV H], [NEXT G], [E], [D], [PAUSE F] and [PLAY B] to decide the picture you want to select as a thumbnail.
Introduction EDITING DISCS Dividing a Title You can divide one title into 2 new titles. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR DISC MENU SETUP o OK s Use [K / L] to select “Title Dividing”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Title Dividing B TITLE 1 Recording 0 Use [PREV H], [NEXT G], [E], [D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title.
EDITING DISCS Putting Name on Disc You can put a name on the disc and change it from this menu. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU Press [STOP C] if you are playing back a disc. 1 2 3 Press [DVD] first. Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Edit Disc Name”, then press [OK]. e.g.
Setting or Releasing Disc Protect To prevent accidental editing, or erasing the titles, you can protect them. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Basic Setup .@/: 1 2 Connections STANDBY-ON Follow steps 1 to 2 in “Putting Name on Disc” on page 64 to display “Disc Edit” menu.
EDITING DISCS Erasing Disc Press [STOP C] if you are playing back a disc. You can erase all titles on a disc. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 64 to display “Disc Edit” menu. Use [K / L] to select “Erase Disc”, then press [OK]. e.g.
Introduction EDITING DISCS Making Edits Compatible STANDBY-ON A .@/: ABC DEF 1 2 3 GHI JKL 4 5 6 PQRS TUV WXYZ 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 64 to display “Disc Edit” menu. 3 Use [K / L] to select “Yes”, then press [OK]. MNO 8 9 SPACE CLEAR Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording 7 TIMER Use [K / L] to select “Make Edits Compatible”, then press [OK].
LIST OF SETTINGS The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. • Your change to each settings stays on even when the power is off. • An item which is not currently available is grayed in the settings.
Introduction SETUPS Playback Press [STOP C] if you are playing back a disc. Connections STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 1 2 3 Use [K / L] to select a desired item, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK].
SETUPS Playback (cont’d) 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [OK]. General Setting Playback Display Video Recording Clock Reset All A Use [K / L] to select “Yes”.
Introduction SETUPS Playback (cont’d) 2 C Disc Audio Use [K / L] to select a desired item, then press [OK].
SETUPS Playback (cont’d) 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock Reset All Parental Lock Out Disc Menu Audio Language Disc Menu Language EnglishAudio Language FrenchSubtitle Language Spanish Angle Icon Other Still Mode • Only the languages supported by the disc can be selected. • Audio language setting may not be available to some discs.
Introduction SETUPS Display Press [STOP C] if you are playing back a disc. Connections STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU o B TITLE RETURN B F h i C g -- + VCR REC DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY 1 OSD Language 2 Screen Saver 4 5 When you finish with setting, press [SETUP] to exit.
SETUPS Video Press [STOP C] if you are playing back a disc. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU o OK s B TITLE 1 2 3 RETURN p Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Use [K / L] to select “Video”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input Submenu will appear.
Introduction SETUPS Video (cont’d) 1 Progressive Scan (Default : OFF) 1) Use [K / L] to select “ON“, then press [OK]. If there is no picture or picture is distorted after selecting “Yes”, Wait about 15 seconds for auto recovery. Yes No If you have a standard TV: Select “4:3 Letter Box” or “4:3 Pan and Scan”. The “4:3 Letter Box” setting will display the entire widescreen DVDs on your standard TV, by placing black bars at the top and bottom of the picture, like a normal DVD player does.
SETUPS Reset All Reset the setting to default. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 1 2 3 SETUP DISC MENU o OK s Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Reset All”, then press [OK]. Select “Yes” using [K / L] , then press [OK].
Playback 3) During playback, press [PAUSE F]. Playback will pause and sound will be muted. Press [VCR] first. Before recording, make sure: • The appropriate external input position (E1/E2) to which your external tuner is connected is selected by pressing [SOURCE]. • There is a cassette tape with a erase-protection tab in the unit. • The desired recording mode is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE].
VCR FUNCTIONS One-touch Timer Recording (OTR) This feature allows you to set the recording length simply by pressing [REC I] on the remote control. Press [VCR] first. 1) During normal recording, press [REC I] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC I] repeatedly. (Normal recording) (8:00) (0:30) (1:00) Index Search An index mark will be assigned at the beginning of each recording you make.
Time Search Press [VCR] first. 1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom The power does not turn on. There is no picture. Cannot record a TV program. TV program pictures are distorted. Playback picture is distorted. There is no sound. D V D • V C R Nothing was recorded even though you set the timer setting correctly.
Symptom There is no picture. Connections Basic Setup Recording Playback D V D Editing Function Setup VCR Functions Remedy • If the main menu appears on the TV screen, press [RETURN] to exit. • Check if the progressive scan mode is set correctly according to your TV (page 75). Picture noise appears. • Clean the disc with a cleaning cloth.
TROUBLESHOOTING Symptom “Repairing” appears on the TV screen. Repairing D V D In a case you intend to cancel the repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable. Remedy • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about several hours.
Error message Cause Solution • Insert the standardized disc which bear the marks on page 40. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Playback is not authorized in the region of the DVD-video which you inserted in the unit. • Insert the DVD-video with region codes 1 or ALL. Parental Lock On The current selected parental level prohibits playback. • The current selected parental level prohibits playback.
TROUBLESHOOTING Frequently Asked Questions – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC. – Can I program a timer recording with external tuner? Yes, you can. Select “E1” or “E2” as your recording channel, and leave the external tuner on (pages 12, 2528).
Function Setup VCR Functions Others Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 Editing Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Ton
GLOSSARY Analog Audio PBC (playback control) (video CD only) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect Ratio The width of a TV screen relative to its height.
Introduction SPECIFICATIONS General System Video recording format Sampling frequency Compression format Front 13.
ESPAÑOL Discos Reproducibles Disco Grabable Este aparato es compatible con la reproducción de los siguientes discos y archivos. Discos reproducibles Logotipos DVD-video DVD+RW DVD+R DVD-RW (Sólo discos en modo de video finalizados) DVD-R (Sólo discos en modo de video finalizados) CD-DA (CD de audio) CD de video Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces.
Introduction ESPAÑOL Conexión a un Sintonizador Externo 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión como se ilustra abajo. AUDIO IN L VIDEO IN R parte trasera de su televisor cable coaxial de RF señal de TV DVD/VCR S-VIDEO IN --- AUDIO --- OUT ANT.
ESPAÑOL Configuración Inicial Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 2 Presione [STANDBY-ON y]. Grabación Básica 1 Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. * Asegúrese de que el disco sea compatible con este aparato.(Para obtener la lista de discos compatibles consulte la página 21.) Utilice [K / L] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo.
Introduction ESPAÑOL Grabación con Temporizador A ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 3 4 5 Empieza Termina Prog. nuevo 2 SETUP DISC MENU Configure una programación del temporizador. Presione [OK]. Presione [TIMER SET] para configurar una programación del temporizador. El indicador TIMER REC del panel frontal se iluminará.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.