OWNER'S MANUAL CIWL3706 37 INCH ANALOG / DIGITAL LCD TELEVISION HIGH-DEFINITION TELEVISION TO RECEIVE ANALOG/DIGITAL SIGNAL YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045, OR VISIT OUR WEB SITE AT http://www.funai-corp.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELEC- THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this indicates a need for service. 20.
SUPPLIED ACCESSORIES • Owner’s Manual (1EMN21883) • Remote control unit (NF009UD) • Batteries (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our help line mentioned on the front page. • Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items.
IMPORTANT SAFEGUARDS PRECAUTIONS . . . . . . . . . . SUPPLIED ACCESSORIES . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUNCTIONS REMOTE CONTROL, TOP AND REAR PANEL FUNCTION SLEEP button (p23) To turn the power off automatically at preset time INPUT SLEEP SELECT POWER POWER button (p12) INPUT SELECT button (p20) To select TV or external input mode (to access DVD, VCR, etc.
AUDIO OUT jacks Connect audio cable here through the audio in jacks of audio equipment. DIGITAL AUDIO OUT (COAXIAL) jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. ANT. IN HDMI IN jacks Connect HDMI cable and audio cable coming from the HDMI and audio out jacks of external devices. L L AUDIO AUDIO OUT DIGITAL AUDIO OUT (COAXIAL) HDMI IN R R HDMI from underneath Rear of this TV Y ANT.
PREPARATION FOR USE CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: • Be sure that antenna or cable is connected properly before plugging the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting TV to antenna Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
EXTERNAL CONNECTION PREPARATION FOR USE [HDMI CONNECTION] 1) This is the best method to connect this TV to a video device with the HDMI output jack, such as a DVD player with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable for connection. HDMI cable (commercially available) To HDMI IN jack HDMI OUT ANT.
[COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as a DVD player, etc. Use the Component video cable for connection. If you connect component output jacks to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1. If you connect component output jacks to COMPONENT2 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT2.
[ANALOG AUDIO/VIDEO CONNECTION] 1) This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc. When the audio jack of video devices is monaural, connect this TV to the AUDIO L jack.
INITIAL SETTINGS Hint: Before starting initial setup you must connect antenna. INITIAL SETTINGS 3 This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below. Select your language using [K /L], press [ENTER]. When you first turn on the power, the following screen is displayed. Initial Setup • LANGUAGE SELECTION You can select the menu language displayed on the screen among English, Spanish and French.
CHANNEL SETTINGS AUTOSCAN If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform Autoscan again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires. 3 For TV channels, using [K /L], select “Air”. For CATV channels, select “Cable”. Autoscan Cable Air Cable 1hour Cable Or ANT IN SCREEN MODE ENTER INFO BACK • Press [ENTER].
CHANNEL LIST 3 The Channel List function lets you skip the unnecessary channels from the Channel registration list. Select the channel you want to skip. • Using [K/L], select the channel. Channel List STILL - Highlight channels for Ch Up/Down key selection. 0 SCREEN MODE SETUP DTV 6 DTV 8 DTV 48 DTV 67 9 27 58 ENTER Ch Select INFO BACK 1 MUTE Watch/Skip Back • Press [ENTER], and the highlight on the selected channel disappears, then the channel is set as skip.
MANUAL REGISTER 3 Select the channel you want to add. • Using Channel number buttons, select your desired channel. You can register the remainder of channels that were not scanned by the Autoscan function due to the bad reception status at the initial setting. 11 INPUT SLEEP SELECT POWER 1 2 3 4 5 6 7 8 9 Manual Register For Analog channels, select a channel to register using number keys. For Digital channels, you must perform Autoscan function.
• If the channel is set to external input, you cannot confirm the antenna situation. ANTENNA CONFIRMATION You can verify the signal strength of each channel to get a clearer picture. Video1 Antenna Back INPUT SLEEP SELECT POWER Indicator is available for antenna signal only. 1 2 3 4 5 6 CH Ch Change AUDIO 7 8 - 0 9 3 STILL SCREEN MODE SETUP ENTER INFO BACK CH RETURN VOL. 1 CH MUTE Display the setup screen. • Press [SETUP]. The following setup screen is displayed.
LANGUAGE SELECTION You can choose your on screen language from one of the following English, Spanish or French. STILL - 0 SCREEN MODE SETUP ENTER INFO BACK 1 MUTE CHANNEL SETTINGS CH RETURN VOL. CH Display the setup screen. • Press [SETUP]. The following setup screen is displayed. 2 Select “LANGUAGE” and press [ENTER] to confirm. • Using [K /L], select “English”, “Español” or “Français”. Language Select the language for setup display. English Elija idioma de preparación.
WATCHING TV NTSC CHANNEL SELECTION CH4-1 No signal No signal You can select the channel by using either [CH K/L] or Channel number buttons. How to select the channel in each way is shown below.
STILL MODE When the broadcasting has stereo audio and monaural audio... You can freeze the image shown on the screen. 1 2 MONO / STEREO 3 4 5 6 7 8 9 - 0 AUDIO SAP / MONO STILL SAP / MONO When the broadcasting is having only monaural audio... SCREEN MODE SETUP MONO / STEREO When the broadcasting has SAP and monaural audio... MONO (cannot be switched.) Pause the image. • When you press [STILL], the image shown on the screen is paused.
SWITCHING EXTERNAL INPUT When you connect external devices including a DVD player and home audio system, you can easily switch the input mode with the remote control. INPUT SLEEP SELECT POWER 1 2 3 4 5 6 • When you press [INFO], the current external input mode, the type of resolutions for video signal, TV aspect ratio, CC and TV rating will be displayed at the top-right of the screen.
CHANGING THE SCREEN DISPLAY MODE Each 4 types of display mode can be selected in the screen mode in both 4:3 and 16:9 TV aspect ratio. You can select your favorite screen mode and enjoy the program. AUDIO 7 8 - 0 9 Switch the Screen mode. • Every time you press [SCREEN MODE], the TV aspect ratio will be switched alternately. 2 Press [SCREEN MODE] repeatedly until the normal screen displays. NOTE: STILL • You may not switch the display mode depending on the program.
DTV SCREEN INFORMATION You can display the currently selected channel number or other information such as the audio mode on the screen for checking. 1 AUDIO 7 8 9 - 0 SCREEN MODE • The following information is displayed. ENTER (1) Program title INFO BACK (2) Broadcast station CH RETURN VOL. MUTE Display the detailed information for the channel. • Press [INFO] on the remote control. The currently selected program details are displayed on the screen.
OPTIONAL SETTINGS SLEEP TIMER SETUP SCREEN The Sleep Timer function will automatically turn off the power of the unit at a preset time. This section describes the overview of the setup screen displayed when you press [SETUP]. For more details, see the reference page for each item. INPUT SLEEP SELECT 1 2 3 4 5 6 7 8 9 The setup screen consists of the function setting items below. AUDIO • To exit settings.
Contrast Using [s / B], adjust to increase or decrease contrast. s: To decrease contrast B: To increase contrast PICTURE ADJUSTMENT You can enjoy your favorite picture mode selecting from four picture default settings that will adjust colors to enhance your viewing experience. Also, the brightness, contrast, color, tint, sharpness color temperature, and energy saving settings can be changed.
CLOSED CAPTION You can view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program. 4 Switch the Closed Caption mode. Closed Caption Conventional CC Off DTV CC CC1 CC Style CC2 CC3 CC4 Text1 You can also change the font size and the font style by selecting options in the “Conventional CC”. Text2 Text3 Text4 STILL - • Using [K /L], select the desired closed caption, then press [ENTER].
DTV CLOSED CAPTION DTV Apart from closed captions, DTV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. 1 CLOSED CAPTION STYLE 1 Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Display the setup screen. • Press [SETUP]. The following setup screen is displayed. 2 Select “DETAIL” and press [ENTER] to confirm. • Using [K /L], select “Closed Caption” and press [ENTER] to confirm.
[Font Opacity] Font opacity of the displayed caption can be switched as below. Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed. • Using [K /L], select the item you want to set. • You can switch the setting for each item with [K /L].
V-CHIP 3 You can set the viewing limitations to prevent your children from watching inappropriate programs including disagreeable expression and description. The viewing limitations set for the program can be released by entering the password. Enter the password. • Use Channel number buttons and enter the 4-digit number. V-Chip Enter password. INPUT SLEEP SELECT POWER BACK PIN Code 1 2 3 4 5 6 7 8 9 - 0 • When you have not set up your password, enter 0000.
Set “MPAA Rating”. • Using [K /L], select the rating. • Press [ENTER] and set to “View” or “Block”. 5 • Press [ENTER] and set to “View” or “Block” for the rating without sub categories.
C New Password 4 Display the “New Password” screen. • Using [K /L], select “New Password”. V-Chip MPAA Rating TV Rating New Password • Press [ENTER]. 5 Change the password. • Use Channel number buttons on the remote control and enter the NEW 4-digit password. • Enter password again in “Confirm password” space. V-Chip Enter password. Confirm password. PIN Code 6 BACK Back To exit the setup, press [SETUP]. NOTES: • Make sure to enter the exact same new password as the “Confirm password.”.
HDMI AUDIO Set the method of sound input for HDMI jack. STILL - 0 SCREEN MODE SETUP ENTER INFO BACK 1 Display the setup screen. 2 OPTIONAL SETTINGS • Press [SETUP]. The following setup screen is displayed. Select “DETAIL” and press [ENTER] to confirm. • Using [K /L], select “HDMI Audio” and press [ENTER] to confirm. Detail Closed Caption V–chip HDMI Audio 3 Auto Switch the HDMI Audio. • Using [K /L], select the desired HDMI Audio, then press [ENTER].
MISCELLANEOUS TROUBLESHOOTING GUIDE Before calling for service, check the following chart again. Symptom 32 EN Remedy No power • Be sure the Power cord is connected to outlet. • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself. No picture or sound • Check if the power is on. • Check the outlet connection. • Check the antenna or cable connection to the main unit. • When the outside antenna is used, check the wire condition and connection.
Remedy Picture rolls vertically • When the outside antenna is used, check the wire condition and connection. • Electric waves may be interfered due to the electric appliances, etc. nearby. • Try to view other channels. It may be the problem on the broadcasting station. Different color marks on screen • Move the TV apart from electric appliances nearby. Turn off the power and wait for about 30 minutes, then turn it on again. • Try to view other channels. It may be the problem on the broadcasting station.
GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as its height). Component video This is a video signal format that conveys each of three principal colors of light (red, blue and green) through different signal lines.
SPECIFICATIONS Closed Caption System: ATSC NTSC-M TV Standard §15.119/FCC (Analog CC) §15.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION : PARTS : LABOR : FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are not covered under this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.