OWNER'S MANUAL CIWP4206 A CIWP4206 42 INCH ANALOG / DIGITAL PLASMA DISPLAY TV TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. HIGH-DEFINITION TELEVISION By changing the screen display mode from time to time, you can reduce burn-in on screen. (Refer to “CHANGING THE SCREEN DISPLAY MODE” on page 21.) IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045, OR VISIT OUR WEB SITE AT http://www.funai-corp.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
• • • • Place your TV in a room with adequate ventilation. Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. Do not place your TV on soft surfaces, such as rugs or blankets. Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual.
SUPPLIED ACCESSORIES • Owner’s Manual (1EMN22014A) • Quick Set Up (1EMN22015A) • Remote control unit (NF009UD) • Batteries (“AA” x 2) • Power Cable (WBC0192LW001) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of Combiners (Mixers) or Separator (Splitters). Contact your local electronics store for these items.
IMPORTANT SAFETY INSTRUCTIONS PRECAUTIONS . . . . . . . . . . . . . . . . . . SUPPLIED ACCESSORIES . . . . . . . . . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUNCTIONS REMOTE CONTROL, CONTROL AND REAR PANEL FUNCTION INPUT SELECT button (p20) Press to access connected external devices like a DVD recorder or VCR. SLEEP button (p23) Press to activate the sleep timer. INPUT SLEEP SELECT POWER POWER button (p13) Press to turn the TV on and off. AUDIO button (p19) 1 2 3 4 5 6 Press to display on-screen menu. 7 8 9 s / B / K / L buttons (p13) To move left / right / up / down through the items. - 0 Number buttons (p18) Press to select a channel.
DIGITAL AUDIO OUT (COAXIAL) jack Digital audio coaxial cable connection for decoder or audio receiver. Connect cable to DIGITAL AUDIO IN jack of external device. from underneath HDMI ANT. IN AUDIO OUT HDMI IN jack HDMI cable connection for external video equipment (i.e.DVD recorder). AUDIO L DIGITAL AUDIO OUT (COAXIAL) by side AUDIO OUT jacks Audio cable connection for external audio equipment. Use AUDIO IN jacks of external equipment.
PREPARATION FOR USE CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: • Be sure your antenna or other source is connected properly before plugging in the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting your TV to an antenna Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. PREPARATION FOR USE HDMI cable (not included) To HDMI IN jack HDMI ANT.
[COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV. Use a component video cable (not included) to connect your TV to external video devices equipped with component video jacks. If you connect to your TV’s COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT1. If you connect to your TV’s COMPONENT2 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT2.
[VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV. When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack.
[ANALOG AUDIO CONNECTION] If you connect this TV to an external analog audio device, you can enjoy stereophonic (2 channel) audio sound. Required audio cable not included. To audio input jacks HDMI ANT. IN AUDIO OUT AUDIO IN DIGITAL AUDIO OUT (COAXIAL) AUDIO L L R R HDMI IN Stereo system Audio cable (not included) To AUDIO OUT jacks Rear of this TV CONNECTING THE POWER CABLE Connect the power cord (included) to the TV before connecting it to the power source. HDMI ANT.
INITIAL SETTINGS 4 INITIAL SETUP Select source of ANT. IN jack using [K /L], press [ENTER]. This section will guide you through your TV’s initial set up which includes selecting a language for your on-screen menu and AUTOSCAN, which automatically scans and memorizes viewable channels.
CHANNEL SETTINGS 3 AUTOSCAN For TV channels, using [K /L], select “Air”. For CATV channels, select “Cable”. With AUTOSCAN, your TV automatically scans and memorizes your area’s viewable channels. Activate AUTOSCAN when you turn on your TV for the first time, change broadcast sources (e.g. from antenna to CATV), or move your TV to a different broadcast area. Autoscan Back Autoscan will rescan all channels. This may take a while to complete. Air Select the destination of "ANT IN" jack.
CHANNEL LIST MANUAL REGISTER This function lets you remove undesired channels from the Channel Registration List. This function lets you manually add channels not memorized due to poor broadcast strength during AUTOSCAN. STILL 0 SCREEN MODE SETUP 1 2 3 4 5 6 7 8 9 - 0 AUDIO ENTER INFO BACK STILL CH RETURN 1 SETUP Display the setup screen. ENTER • Press [SETUP]. The following setup screen appears. 2 SCREEN MODE CHANNEL SETTINGS - INFO BACK 1 Display the setup screen.
• If the channel is set to external input, you cannot confirm the antenna situation. ANTENNA CONFIRMATION Displays signal strength for each channel. Video1 Antenna INPUT SLEEP SELECT POWER Back 1 2 3 4 5 6 7 8 9 Indicator is available for antenna signal only. AUDIO CH Ch Change STILL - 0 3 SCREEN MODE SETUP ENTER INFO BACK CH RETURN VOL. 1 CH MUTE Display the setup screen. • Press [SETUP]. The following setup screen appears. 2 Select “CHANNEL” and press [ENTER] to confirm.
LANGUAGE SELECTION SETTING THE PANEL SAVER You can choose English, Spanish, or French as your on screen language. Panel saver prevents the display from being etched by an unchanging image. You can specify a setting for it. STILL - 0 STILL SCREEN MODE SETUP - 0 SCREEN MODE SETUP ENTER INFO BACK ENTER INFO BACK VOL. MUTE CH RETURN CH VOL. 1 CH MUTE Display the setup screen. • Press [SETUP]. The following setup screen appears.
WATCHING TV CHANNEL SELECTION Select channels by pressing [CH K/L] found on remote control or on the TV’s control panel, or by pressing [the Number buttons] found on the remote control.
Press [AUDIO] to cycle through available audio channels. STILL MODE You can freeze the image shown on the screen. 1 2 3 4 5 6 7 8 9 When the broadcasting has all audio... SAP / STEREO SAP / MONO SAP / STEREO AUDIO STILL 0 SCREEN MODE 1 When the broadcasting has stereo audio and monaural audio... MONO / STEREO Pause the image. • When you press [STILL], the image shown on the screen is paused. MONO / STEREO When the broadcasting has SAP and monaural audio...
ACCESSING EXTERNAL DEVICES Use your remote control to access DVD recorders, home audio systems and other external devices when they are connected to your television. INPUT SLEEP SELECT POWER 1 2 3 4 5 6 7 8 9 • When you press [INFO], the current external input mode, the type of resolutions for video signal, TV aspect ratio, CC and TV rating will be displayed at the top-right of the screen. • The information display will automatically disappear in 1 minute.
CHANGING THE SCREEN DISPLAY MODE Each of 4 display modes can be selected in either 4:3 or 16:9 aspect ratios. AUDIO 8 9 STILL - 2 Press [SCREEN MODE] repeatedly until the normal screen displays. 0 NOTES: SCREEN MODE SETUP • Some programs may not offer all display mode options. • By changing the screen display mode from time to time, you can reduce burn-in on screen. ENTER BACK Press [SCREEN MODE], to switch the TV aspect ratio. INFO When the broadcast is sending 4:3 video signal...
DTV SCREEN INFORMATION You can display the currently selected channel or other information such as the audio mode on the screen. 1 AUDIO 7 8 9 - 0 SCREEN MODE • The following information is displayed. ENTER (1) Program title INFO BACK (2) Broadcast station CH RETURN VOL. MUTE Display the detailed information for the channel. • Press [INFO] on the remote control. The currently selected program details are displayed on the screen.
OPTIONAL SETTINGS SLEEP TIMER SETUP SCREEN The Sleep Timer can be set to automatically turn off your television after an incremental period of time. This section describes the overview of the setup screen displayed when you press [SETUP]. For more details, see the reference page for each item. INPUT SLEEP SELECT POWER 1 2 3 4 5 6 The setup screen consists of the function setting items below. • AUDIO 7 8 - 0 To exit settings.
Contrast Using [s / B], adjust to increase or decrease contrast. s: To decrease contrast B: To increase contrast PICTURE ADJUSTMENT You can select from four default picture color settings. You can also adjust brightness, contrast, color, tint, sharpness and color temperature settings. Contrast SCREEN MODE SETUP INFO Color 1 Display the setup screen. Enter Adjust 60 36 Tint 0 Sharpness 0 ENTER Enter Move ENTER Enter Reset Settings Using [K /L], select “Reset”.
[Caption Mode] CLOSED CAPTION CC1 and Text1: are the primary caption and text services. The captioning or text is displayed in the same language as the program’s dialogue You can view closed captioning (cc) for TV programs, movies, news, and prerecorded tapes. Closed captions refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. (up to 4 lines of script on the screen, where it does not obstruct relevant parts of the picture).
DTV CLOSED CAPTION CLOSED CAPTION STYLE DTV DTV Apart from closed captions, DTV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. 1 1 Display the setup screen. • Press [SETUP]. The following setup screen appears. Display the setup screen. • Press [SETUP]. The following setup screen appears. 2 2 Select “DETAIL” and press [ENTER] to confirm. • Using [K /L], select “Closed Caption” and press [ENTER] to confirm. Select “DETAIL” and press [ENTER] to confirm.
[Font Opacity] Font opacity of the displayed caption can be switched as below. Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed. • Using [K /L], select the item you want to set. • You can switch the setting for each item with [K /L].
V-CHIP 3 You can block certain programming inappropriate for children. This block can be released by entering a password. Enter the password. • Use [the Number buttons] and enter the 4-digit number. V-Chip INPUT SLEEP SELECT POWER Enter password. 1 2 3 4 5 6 BACK PIN Code AUDIO 7 8 • When you have not set up your password, enter 0000. • When the password is correct, the following “V-Chip” screen is displayed.
Set “MPAA Rating”. • Using [K /L], select the rating. • Press [ENTER] and set to “View” or “Block”. 5 • Press [ENTER] and set to “View” or “Block” for the rating without sub categories.
C New Password HDMI AUDIO 4 Set the method of sound input for HDMI jack. Display the “New Password” screen. • Using [K /L], select “New Password”. STILL - 0 SCREEN MODE SETUP V-Chip MPAA Rating TV Rating New Password ENTER INFO BACK 1 • Press [ENTER]. 5 Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Change the password. • Use [the Number buttons] on the remote control and enter the NEW 4-digit password. • Enter password again in “Confirm password” space.
ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY) The following is a description of the method for attaching a wall mount to the TV. When performing this operation, refer to the instruction manual included with the wall mount kit. # CAUTION • Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the manufacturer’s warranty. • This TV is for use only with the Sanus Systems Model VMPL. Wall Mount.
MISCELLANEOUS TROUBLESHOOTING GUIDE Before calling for service, please refer to the following information. Symptom 32 EN Remedy No power • Be sure the power cord is connected to outlet. • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself. No picture or sound • Check if the power is on. • Check the outlet connection. • Check the antenna or cable connection to the main unit. • When the outside antenna is used, check the wire condition and connection.
Remedy Ghosts in picture • Check the antenna or cable connection to the main unit. • When the outside antenna is used, check the wire condition and connection. • Electrical interference from nearby appliances may affect picture quality. • View other TV channels. The problem might be limited to the broadcasting station. Bars on screen • When the outside antenna is used, check the wire condition and connection. • Electrical interference from nearby appliances may affect picture quality.
Problems with Closed Caption Feature Misspelled captions are displayed. • Closed captioning production companies may broadcast programs without correcting the misspelling in a live broadcast. Captions are not entirely displayed, or • Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production compacaptions are delayed behind the dianies can display a dialogue to a maximum of 220 words per minute. If logue.
•IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. •GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as its height). Component video This is a video signal format that conveys each of three principal colors of light (red, blue and green) through different signal lines.
SPECIFICATIONS Closed Caption System: ATSC NTSC-M TV Standard §15.119/FCC (Analog CC) §15.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION : PARTS : LABOR : FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are not covered under this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
L0703CD_QG.qx4 06.9.26 11:06 AM Page 1 QUICK SET UP GUIDE D’INSTALLATION RAPIDE Some cables here are not included with the plasma display TV. Certains des câbles présentés ici ne sont pas fournis avec le téléviseur écran plasma.
L0703CD_QG.qx4 3 06.9.26 11:06 AM Page 2 HDMI CONNECTION CONNEXION HDMI DVR or DVD Player With HDMI Out Jack Plasma Display TV rear side DVR ou Lecteur DVD avec prise de sortie HDMI Arrière du téléviseur écran plasma HDMI ANT.