Operation Manual

12 EN
1) Press MENU.
2) Press
PLAY/K or STOP/L to select “TIMER”, then press
F.FW D/B.
Note: If you have not set the clock yet, “CLOCK” setting
menu appears. If so, follow the steps outlined in the
“Setting the Clock” section. Then, set the timer.
•When you press
F.FW D/B after pressing PLAY/K or
STOP/L during steps 3) to 8), the input mode will move to
the next step.
• If you do not press F.FW D/B within 5 seconds of setting an
item, the input mode will move to the next step.
•Press REW/s to go back one step from the current setting
during steps
4) to 9). If REW/s is pressed when the
TIMER NUMBER is flashing, the entire programme
contents will be erased.
3) Programme number flashes. Press
PLAY/K or STOP/L
repeatedly until the desired programme number appears.
Then, press
F.FW D/B.
4)
For once-only recording : Press PLAY/K or STOP/L
repeatedly until the relevant month appears.
For daily recording : To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
PLAY/K or
STOP/L repeatedly to select “MO-FR”.
For everyday recording : To record a TV programme at
the same time on the same channel everyday. While the
month digit is flashing, press PLAY/K or STOP/L
repeatedly to select “MO-SU”.
For weekly recording : To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press PLAY/K or STOP/L
repeatedly to select “W-MO” (Example: every Monday).
5) For once-only recording only : Press PLAY/K or STOP/L
repeatedly until your desired day appears.
6) Press
PLAY/K or STOP/L repeatedly until the relevant
start hour appears. Next, enter the minute digit.
7) Press PLAY/K or STOP/L repeatedly until the relevant end
hour appears. Next, enter the minute digit.
8) Press PLAY/K or STOP/L repeatedly until the relevant
channel number appears.
9) Press
PLAY/K or STOP/L repeatedly until the desired tape
speed appears.
10)Press
F.FW D/B. Programme is now completed.
•To set another timer programme, repeat steps
3) to 10).
11)Press
MENU to exit.
12)Press
FUNCTION to activate the timer.
The indicator on the display comes on.
To Stop a Timer Programme which has Already
Started
Press STOP/EJECT on the VCR.
Note: STOP/L on the remote control will not function in the
Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1) Repeat steps 1) to 3) in the “Timer Recording” section.
2) Select the setting you want to change using
F.F WD /B or
REW/s.
3) Enter the correct numbers using
PLAY/K or STOP/L,
then press
F.FW D/B.
4) Press
MENU to exit.
5) Press
FUNCTION to return to timer standby mode.
To Cancel or Check the Start/End Time
1) Repeat steps 1) to 2) in the “Timer Recording”.
2) Select a programme number you want to check using
PLAY/K or STOP/L. The details of selected programme
appears on the TV screen. You may cancel the entire
programme by pressing REW/s.
3) Press
MENU to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Hint for Timer Recording
• If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The indicator will flash.
• If a tape is not in the VCR, Timer Recording cannot be
performed and the indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the indicator will flash. Please insert a
recordable tape.
• When all the Timer Recordings are completed, the
indicator also flashes. To play or eject the recorded tape,
press
FUNCTION first, and then press PLAY/K or
EJECT A. To rewind the tape to the beginning of the
recorded programmes, press
AUTO RETURN on the VCR.
• The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer Recording mode.
• The VCR will only perform a Timer Recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed the indicator
flashes, press
AUTO RETURN on the VCR first. The VCR will
rewind to the beginning of the recorded programme(s).
Note: If there are any remaining programmes, press
FUNCTION to turn on the VCR and then press
AUTO RETURN. In this case, if you press any other
button once and then press
AUTO RETURN, AUTO
RETURN will not be carried out.
MENU
TIMER
SET UP
INITIAL
TIMER NUMBER 1
START
END
DATE
CHANNEL
SPEED
--/--
--:--
--:--
--
--
9:00 10:00 11:00
Programme 1
Programme 2
Programme 3
HM457ED(EN).fm Page 12 Friday, July 1, 2011 10:06 AM