User Manual

ManualsBrandsFunai ManualsDVD RecorderDVR90DEA

• Remote control

(NB001UD)

with two AA batteries

• RF cable

(WPZ0901TM002 or

WPZ0901CAB01)

• Audio/Video cables

(WPZ0102TM015 or

WPZ0102LTE01)

• Owner’s Manual

(1VMN20110)

• Quick Use Guide

(0VMN04181)

Owner's Manual

Recording Playing discs Editing

Before you start Connections

Getting started

Changing the SETUP menu

Others

Español

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or to

order replacement accessories, please call

TOLL FREE :

1-800-968-3429

or visit our web site at http://www.funai-corp.com

Before you use this unit, you need to complete connections.

Refer to “Connections” on pages 13-15.

To r ecord a program easily, refer to “Easy DVD recording” on pages 16-17

after connections are completed.

(You CANNOT record on any copyright protected DVD disc with this DVD recorder.)

DVR90DEA

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Owner’s Manual

DVD Recorder

Supplied Accessory

E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 1

Summary of content (100 pages)

PAGE 1
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 1 Before you start Owner’s Manual Getting started DVR90DEA Connections DVD Recorder Recording Playing discs INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Supplied Accessory • Owner’s Manual (1VMN20110) • Quick Use Guide (0VMN04181) Owner's Manual Español (You CANNOT record on any copyright protected DVD disc with this DVD recorder.) Others Before you use this unit, you need to complete connections. Refer to “Connections” on pages 13-15.
PAGE 2
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 2 Before you start Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 3
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 3 Before you start Important Safeguards porting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.
PAGE 4
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 4 Before you start Precautions (cont’d) Installation Location Symbol in this owner's manual For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places.
PAGE 5
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 5 Before you start Recording . . . . . . . . . . . . . . . . . . . . . . .26 Tour of the SETUP menu . . . . Settings for Language . . . . . . . Settings for Display . . . . . . . . . Settings for Audio . . . . . . . . . . Settings for Parental lock level Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 .84 .86 .88 .90 Others . . . . . . . . . . . . . . . .
PAGE 6
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 6 Before you start Features This DVD unit not only plays DVD’s and CD’s but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this DVD recorder. Recording This DVD recorder is compatible with both DVD-RW, which is rewritable repeatedly, and DVD-R, which is available for recording once.You can choose either one for your convenience.
PAGE 7
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 7 Before you start Before you start Functional overview Front Panel 1 2 345 6 7 8 9 1. POWER button Press to turn the DVD recorder on and off. 2. 3. 4. 6. 7. Rear Panel 11. 12. 13. 14. 15. 1 2 1. 3. 4. 6. 7 7. TV ANTENNA OUT jack Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor. 8. S-VIDEO INPUT jack(LINE1) Use to connect the S-Video output of external equipment with an S-Video cable. 9.
PAGE 8
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 8 Before you start Functional overview (cont’d) Remote Control POWER 2 1 3 TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 SPACE 0 CM SKIP A CH REC MONITOR 4 REC SPEED CLEAR 6 8 5 REC PAUSE 7 H 19 G 20 B FWD h g 21 STOP C SETUP TOP MENU 12 14 18 PLAY REV 11 13 16 17 SKIP F 9 10 OPEN/CLOSE DISPLAY MENU/LIST 22 K ENTER REPEAT { B 1. POWER button Press to turn the DVD recorder on and off.
PAGE 9
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 9 Before you start Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the DVD recorder. • Use within the operating range and angle as shown. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the DVD recorder. • Remote control for different devices can interfere with each other.
PAGE 10
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 10 Before you start Functional overview (cont’d) Guide to Displays on screen menu The DVD recorder uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc information for checking the status of the disc.
PAGE 11
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 11 Before you start Before you start Functional overview (cont’d) DISPLAY menu 3 1 : Audio : Subtitle : Angle (except VR mode) : Repeat : Marker Getting started Details are on page 41. : Search : Noise Reduction : Zoom 1 1 00:00:00 DVD-RW Video mode SP 1:25 Rem. 4 Connections Press DISPLAY button to call up the display menu.This menu will give you the information on the playing disc. Some operations are available while disc is playing. 1.
PAGE 12
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 12 Before you start Functional overview (cont’d) Guide to Displays on the front panel 4 2 1 3 7 6 5 1. Current status of the DVD recorder 2. Disc type : Appears when an audio CD or a disc with MP3 files is inserted in the disc tray. : Appears when a disc play is paused. : Appears when playing a disc. : Appears when a DVD disc is inserted in the disc tray. : Appears when the timer programming has been set and is proceeding.
PAGE 13
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 13 Connections Before you start Connection to a TV Antenna Antenna Cable Signal Cable Signal (Back of TV) AUDIO IN VIDEO (Back of TV) 5 or 4 Connect Audio Cable (supplied) Connect Video Cable (supplied) Connections or 3 Connect RF Cable (supplied) Getting started 2 1 Connect Disconnect (Back of DVD recorder) 6 Plug in the AC power cord of the DVD recorder.
PAGE 14
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 14 Connections Connection to a cable box or satellite box A When connecting to a cable box or satellite box with only a few scrambled channels If you are using a cable box or satellite box with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page. With this setup: • You can record any unscrambled channel by selecting the channel on the DVD recorder.
PAGE 15
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 15 Connections Before you start Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to each owner’s manual for further information on other devices.
PAGE 16
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 16 Getting started Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type Step 2: Insert a blank disc Remote Control There are several types of DVD disc recordable to choose from. Choose an applicable type by “DVD disc types” on this page.
PAGE 17
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 17 Getting started POWER DISPLAY TIMER PROG. Step 4: Select the desired channel POWER OPEN/CLOSE DISPLAY TIMER PROG. CH REC MONITOR ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 TUV 8 WXYZ 9 SPACE 0 CM SKIP OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A A CH REC MONITOR .
PAGE 18
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 18 Getting started Channel setting All channels are stored in the DVD recorder when purchased. We recommend that you get available channels in your area stored using “Auto Preset” in the Channel Preset of the SETUP menu. 4 POWER Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. 1 DISPLAY TIMER PROG. .
PAGE 19
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 19 Getting started Before you start Channel setting (cont’d) Adding/deleting channels Select “Manual Preset” using K / L buttons, then press ENTER button. Manual Preset menu will appear. POWER TIMER PROG. .
PAGE 20
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 20 Getting started Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “TV Audio Select” using K / L buttons, then press ENTER button. Option window will appear. POWER TIMER PROG. .
PAGE 21
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 21 Getting started Before you start Clock setting Auto Clock Setting 4 Select “Auto Clock Setting” using K / L buttons, then press ENTER button. Option window will appear. POWER 7 REC MONITOR Setup > Clock Clock Setting Auto Clock Setting Daylight Saving Time TIMER PROG. .
PAGE 22
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 22 Getting started Clock setting (cont’d) Manual Clock Setting 4 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Clock Setting” using K / L buttons, then press ENTER button. A clock setting window will appear. POWER TIMER PROG. .
PAGE 23
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 23 Getting started Before you start Clock setting (cont’d) 8 Press K / L buttons to select AM or PM, then press ENTER button. Clock menu will appear, then the settings will be activated. Press SETUP button to exit. Although seconds are not displayed, they begin counting from zero. POWER TIMER PROG. .
PAGE 24
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 24 Getting started Clock setting (cont’d) Setting the daylight saving time When Daylight Saving Time is ON, the DVD recorder clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. 4 Select “Daylight Saving Time” using K / L buttons, then press ENTER button. Daylight Saving Time options will appear. Setup > Clock Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 25
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 25 Getting started Before you start Selecting the TV aspect ratio Playback menu will appear. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English POWER Digital Out ON Fast Forward with Audio OFF TIMER PROG. .
PAGE 26
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 26 Recording Information on DVD recording Information Recording speed This DVD recorder can record to DVD-R and DVD-RW discs.When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format.The disc format for DVD-R is always “Video format,” so a recording format will be “Video mode”.
PAGE 27
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 27 Recording Information on copy control Some satellite broadcasts include copy-protected information. For recording these, refer to the following. Copy-free Copy-once Copyprohibited Video mode DVD-RW ver.1.1 ver.1.1 CPRM compatible Recordable Recordable only for DVD-RW ver.1.1 compatible with CPRM Not Recordable Mode DVD-R ver.2.0 Video mode DVD-RW ver.1.1 ver.1.1 CPRM compatible Video mode Playing discs Disc type Recording Video mode DVD-R ver.2.
PAGE 28
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 28 Recording Formatting a disc Settings for the recording format to a blank disc Video VR DVD-RW DVD-RW When inserting a blank disc, the DVD recorder starts to initialize the blank disc. After that, you can record to the disc with the recording format selected in SETUP menu. You are allowed to set a specified time for chapter marks. 3 POWER Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear.
PAGE 29
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 29 Recording Before you start Formatting a disc (cont’d) 6 POWER Select “Auto Chapter” using K / L buttons, then press ENTER button. Option window will appear.
PAGE 30
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 30 Recording Formatting a disc (cont’d) Reformatting a disc Video VR DVD-RW DVD-RW If you are using a DVD-RW disc, by default it will be Video mode. You can change this to VR mode from SETUP menu. 1 4 POWER Select “Yes” using { / B buttons, then press ENTER button. Option window will appear. TIMER PROG. .
PAGE 31
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 31 Recording Before you start Basic recording DVD-R Video VR DVD-RW DVD-RW Follow the steps below to record TV programs. Select a desired channel to record using CH K / L buttons or number buttons. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A 4 CH REC MONITOR CH 1 OPEN/CLOSE DISPLAY 2 5 REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC SPEED CLEAR PAUSE SKIP F H G B PLAY This operation may take a while to be recognized.
PAGE 32
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 32 Recording Basic recording (cont’d) Checking the recording picture quality DVD-R Video VR DVD-RW DVD-RW You can confirm the recording picture quality with the recording speed you have selected before attempting to record to a DVD disc. 1 While the DVD recorder is in STOP or REC with a DVD disc to record inserted, press REC MONITOR button. The TV program will be on the screen in the recording picture quality with the recording speed you have selected.
PAGE 33
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 33 Recording Before you start One-touch timer recording DVD-R Video VR DVD-RW DVD-RW Turn on the DVD recorder and load a recordable disc. Make sure that the TV input is set on the DVD recorder. Select a desired channel to record using CH K / L buttons or number buttons. POWER Press REC button on the remote control or the front panel, then press REC button repeatedly until a desired recording time (30 minutes to 4 hours) appears on the TV screen.
PAGE 34
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 34 Recording Timer recording DVD-R Video VR DVD-RW DVD-RW You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before making a timer programming. • Insert a recordable disc. 4 Select “Timer Programming” using K / L buttons, then press ENTER button. Timer Programming list will appear. POWER TIMER PROG. .
PAGE 35
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 35 Recording Before you start Timer recording (cont’d) 10 Select the channel number to record using K / L buttons, then press B button. Press ENTER button when all information required is entered. Your program setting will be stored. • To set another program, repeat steps 5 to 10. • To exit, press SETUP button. Setup > Recording > Timer Programming Date Start 1. JAN/12 10:00PM 2.
PAGE 36
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 36 Recording Timer recording (cont’d) Hints for timer recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a disc is not on the tray, the indicator flashes and timer recording cannot be performed. Please insert a recordable disc. • When all the timer recording is completed, the indicator flashes.
PAGE 37
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 37 Recording Before you start Settings for an external source Connection to an external source DVD-R Video VR DVD-RW DVD-RW Connect the external source properly to the DVD recorder by using input jacks either LINE2 (Front) or LINE1 (Rear). VIDEO AUDIO L or OUTPUT AUDIO R R Audio/Video cable Audio/Video cable VIDEO S -VIDEO L or S-Video cable Getting started S-Video cable Connections Another source (VCR camcorder etc.
PAGE 38
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 38 Recording Settings for an external source (cont’d) Recording from an external source DVD-R Video VR DVD-RW DVD-RW Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. 2. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. POWER 1 3.
PAGE 39
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 39 Recording Before you start Finalizing the discs DVD-R Video VR DVD-RW DVD-RW Disc You will need to finalize the discs recorded in Video mode to play in other DVD players. Finalizing discs in Video mode automatically creates title menus. Edit POWER Format Finalize .@/: 1 ABC 2 DEF 3 No CH GHI 4 JKL 5 MNO 6 WXYZ 9 CM SKIP PAUSE SKIP F Select “Yes” using { / B buttons, then press ENTER button. Finalizing will start.
PAGE 40
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 40 Recording Setting a disc to protect VR DVD-RW To prevent accidental recording, editing, or erasing the titles, you can protect them from DISC menu. 3 Select “Disc Protect OFF ➔ ON” using K / L buttons, then press ENTER button. Option window will appear. 1 POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A CH REC MONITOR REC SPEED CLEAR Disc Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 41
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 41 Playing discs Before you start Information on DVD play Before you attempt to play DVD discs, read the following information. Playable discs Logo This DVD recorder has been designed to play DVD discs with Region One (1). DVDs must be labeled for ALL regions or for Region 1 in order to play on the DVD recorder.You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs.
PAGE 42
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 42 Playing discs Basic playback Playback DVD-R Video VR DVD-RW DVD-RW VR mode: POWER Original 1 1 JAN/1 12:00AM 4 JAN/1 1:00AM JAN/1 2:00AM 1 TIMER PROG. .
PAGE 43
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 43 Playing discs DVD-V CD MP3 1 Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. POWER 1 TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR 4 OPEN/CLOSE DISPLAY REC WXYZ 9 CM SKIP PAUSE SKIP F H G B PLAY REV FWD h g STOP C 2 SETUP Press OPEN/CLOSE A button to open the disc tray. The disc tray will open.
PAGE 44
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 44 Playing discs Basic playback (cont’d) Playing discs using the disc menu DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press MENU / LIST button. 1 Press MENU / LIST button.
PAGE 45
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 45 Playing discs Before you start Basic playback (cont’d) Playing discs using the title menu DVD-V 1 If the feature is not available, may appear on the TV screen. POWER Select a title to play using the K / L / { / B buttons, then press ENTER button. Play will begin at the title you selected. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR TOP MENU button: Displays the ‘Title menu’ of a DVD disc which varies with the disc.
PAGE 46
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 46 Playing discs Special playback Resume play Video DVD-V DVD-R DVD-RW 2 VR CD DVD-RW MP3 1 During play, press STOP C button. The resume message will appear. Screen: TIMER PROG. .@/: 1 ABC 2 A Press PLAY B button. In a few seconds, play will resume from the point at which it stopped last.You can resume play at the same point even if you turn off the DVD recorder. You can resume play from where you stopped playing the disc last.
PAGE 47
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 47 Playing discs Before you start Special playback (cont’d) Skipping TV commercials during play DVD-R Video VR DVD-RW DVD-RW e.g. Press CM SKIP button once You can skip TV commercials by pressing CM SKIP button, so that you can enjoy the recorded programs without interrupting. POWER OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 CH REC MONITOR CM Skip 30 sec.
PAGE 48
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 48 Playing discs Special playback (cont’d) Step by step playback Video DVD-V DVD-R DVD-RW 2 VR DVD-RW POWER Press SKIP G button repeatedly. The play will advance one frame (or step) at a time when you press the SKIP button with the sound muted. 1 During play, press PAUSE F button. Play will pause and sound will be muted. To play step by step backward: Press SKIP H button repeatedly. Every time you press the button, the play will go backward by one frame.
PAGE 49
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 49 Playing discs Before you start Special playback (cont’d) Zoom B PLAY REV Video DVD-V DVD-R DVD-RW VR DVD-RW During play, press ZOOM button. Zoom menu will appear. Screen: 1 x1.2 01:23:45 x1.5 C 2 Select a desired zoom factor to zoom using { / B buttons, then press ENTER button. The zoom area will be displayed. SETUP TOP MENU MENU/LIST K ENTER REPEAT { B RETURN ZOOM 1 L 2 3 DVD-Video Note x2.
PAGE 50
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 50 Playing discs Search Title/Chapter search Video DVD-V DVD-R DVD-RW VR DVD-RW POWER Using SKIP H / G buttons Using DISPLAY button 1 1 During play, press SKIP G button to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. During play, press DISPLAY button. The display menu will appear. Screen: 1 OPEN/CLOSE DISPLAY TIMER PROG. .
PAGE 51
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 51 Playing discs Before you start Search (cont’d) Track search CD MP3 Using SKIP H / G buttons Using DISPLAY button During play, press SKIP G button to skip the current track and move to the next. The track will move forward one track at a time. During play, press DISPLAY button. The display menu will appear. Screen: TIMER PROG. .
PAGE 52
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 52 Playing discs Repeat/Random/Program playback Repeat play Video DVD-V DVD-R DVD-RW VR CD DVD-RW MP3 1 Chapter: The current chapter will be played repeatedly. (DVD only) CH REC MONITOR 1 2 3 GHI 4 JKL 5 MNO 6 REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC SPEED CLEAR PAUSE SKIP F During play, press REPEAT button. Repeat menu will appear.
PAGE 53
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 53 Playing discs Before you start Repeat/Random/Program playback (cont’d) Program play CD You can program the disc to play in your desired order. OPEN/CLOSE DISPLAY TIMER PROG. .
PAGE 54
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 54 Playing discs Selecting the format of audio and video You can select an audio or video format as you prefer depending on the contents of the disc you are playing. Switching audio soundtrack VR DVD-V DVD-RW When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during play.
PAGE 55
E6501UD_DVR90DEA.qx3 04.3.17 17:18 Page 55 Playing discs Before you start Selecting the format of audio and video (cont’d) CD MP3 1 2 POWER Select icon using { / B buttons, then press ENTER button. Audio menu will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A 1 CH REC MONITOR REC PAUSE SKIP F Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch.
PAGE 56
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 56 Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V Some DVD Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with a angle icon if it contains multi-angle scenes. 2 POWER Select icon using { / B buttons, then press ENTER button. Angle will switch each time you press ENTER button. TIMER PROG. .
PAGE 57
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 57 Editing Editing discs with Video mode Title list allows you to check the titles recorded on the disc easily.You can choose a title to play from this screen and easily edit the titles as you prefer. You can edit discs with Video mode for the following items. Be sure that once you edit titles, they will not remain as original.
PAGE 58
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 58 Editing Information on disc editing (cont’d) Editing discs with VR mode For discs with VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the original. Editing original titles Editing playlists The following items can be used to edit the original titles.
PAGE 59
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 59 Editing Before you start Editing DVD-RW discs in Video mode Deleting titles Video DVD-RW 3 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Disc > Edit REC WXYZ 9 CM SKIP PAUSE SKIP F H G B 1 PLAY REV FWD h g STOP Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
PAGE 60
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 60 Editing Editing DVD-RW discs in Video mode (cont’d) Putting names on titles Video DVD-RW You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. 4 POWER Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. 1 TIMER PROG. .
PAGE 61
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 61 Editing Before you start Editing DVD-RW discs in Video mode (cont’d) 6 POWER Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. TIMER PROG. .
PAGE 62
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 62 Editing Editing DVD-RW discs in Video mode (cont’d) Setting or clearing chapter markers Video DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. Disc > Edit POWER 1 Title Delete Edit Title Name Chapter Mark TIMER PROG. .
PAGE 63
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 63 Editing Before you start Editing DVD-RW discs in VR mode (Original) Deleting titles Deleting titles VR DVD-RW 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear.
PAGE 64
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 64 Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Deleting parts of titles VR DVD-RW You can delete part of a title, the disc space to record will be increased. Be advised that the parts once deleted cannot be brought back to the disc. 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. CH Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
PAGE 65
E6501UD_DVR90DEA.qx3 04.3.
PAGE 66
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 66 Editing Editing DVD-RW discs in VR mode (Original) (cont’d) 3 6 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. To enter a title name, follow the steps of “Guide to edit title name” on this page. character set POWER TIMER PROG. .
PAGE 67
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 67 Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Setting or clearing chapter markers VR DVD-RW 3 JAN/1 2:00AM 4 TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A JAN/1 3:00AM CH 5 REC MONITOR JAN/1 4:00AM JAN/1 5:00AM REC 4 TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC SPEED CLEAR PAUSE SKIP F H G B Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear.
PAGE 68
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 68 Editing Editing DVD-RW discs in VR mode (Original) (cont’d) : The chapter marker which you selected will be deleted. : Disc > Edit > Original 1 Chapter 2/2 Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON JAN/ 1 1:00AM CH12 DISPLAY TIMER PROG. .
PAGE 69
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 69 Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) 6 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set.
PAGE 70
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 70 Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Setting titles to protect VR DVD-RW To prevent accidental editing, or erasing the titles, you can protect them from the original menu. 1 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. CH .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 REC SPEED CLEAR Disc > Edit > Original 1 TIMER PROG.
PAGE 71
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 71 Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Releasing titles from protecting VR DVD-RW 1 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A CH REC MONITOR REC SPEED CLEAR Disc Edit > Original 2 TIMER PROG.
PAGE 72
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 72 Editing Editing DVD-RW discs in VR mode (Playlist) Deleting titles VR DVD-RW In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased. 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. 1 1 JAN/ 1 1:00AM CH12 2 1 Select “Edit” using K / L buttons, then press ENTER button.
PAGE 73
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 73 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting parts of titles VR DVD-RW 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. .
PAGE 74
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 74 Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Part of a title will be deleted. POWER 7 DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A Disc > Edit > Playlist Select “Delete” using K / L buttons, then press ENTER button. Option window will appear.
PAGE 75
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 75 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) 7 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. POWER 1 TIMER PROG. .
PAGE 76
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 76 Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Setting or clearing chapter markers VR DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the playlist comes to 999 in total, you cannot add any more chapter markers. 1 Press SETUP button.
PAGE 77
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 77 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) : The chapter marker which you selected will be deleted. : Disc > Edit > Playlist 1 JAN/ 1 1:00AM CH12 OPEN/CLOSE DISPLAY TIMER PROG. .
PAGE 78
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 78 Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) 3 6 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set.
PAGE 79
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 79 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Adding titles to a Playlist VR DVD-RW 4 POWER Select “Add New Title” using K / L / { / B buttons, then press ENTER button. Original list will appear.
PAGE 80
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 80 Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting a Playlist VR DVD-RW A Playlist can be deleted if no longer needed. 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 4 POWER Select “Delete Playlist” using K / L / { / B buttons, then press ENTER button. Option window will appear. TIMER PROG. .
PAGE 81
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 81 Editing Before you start Editing DVD-R discs Deleting titles DVD-R Disc > Edit 1 Title Delete Edit Title Name Chapter Mark POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A CH JAN/ 1 1:00AM CH12 XP REC MONITOR 0:01:25 REC SPEED CLEAR You cannot select “Chapter Mark”. REC SPACE 0 PAUSE 4 G PLAY REV FWD h Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear.
PAGE 82
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 82 Editing Editing DVD-R discs (cont’d) Putting names on titles DVD-R You can put names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist.
PAGE 83
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 83 Changing the SETUP menu Before you start Tour of the SETUP menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. SETUP menu Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. OSD Background Transparency 100% Set the background transparency of OSD screen.
PAGE 84
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 84 Changing the SETUP menu Settings for Language Press STOP button if you are playing a disc. POWER 1 DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 85
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 85 Changing the SETUP menu Before you start Settings for Language (cont’d) Disc Menu Language (Default : English) Set the language for Disc Menu.
PAGE 86
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 86 Changing the SETUP menu Settings for Display Press STOP button if you are playing a disc. POWER 1 DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 87
E6501UD_DVR90DEA.qx3 04.3.
PAGE 88
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 88 Changing the SETUP menu Settings for Audio Choose the appropriate Audio settings for your equipment as it will only affect DVD discs during playback. Press STOP button if you are playing a disc. POWER DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A 1 CH REC MONITOR Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 89
E6501UD_DVR90DEA.qx3 04.3.
PAGE 90
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 90 Changing the SETUP menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material. POWER DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A Press STOP button if you are playing a disc.
PAGE 91
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 91 Changing the SETUP menu Before you start Settings for Parental lock level (cont’d) Parental Lock (Default : All) Set the Parental Lock level.
PAGE 92
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 92 Others Troubleshooting Before requesting service for this DVD recorder, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy Power The power does not turn on. • Check that the AC power cord is connected securely. There is no picture. • Re-connect the connecting cord securely.
PAGE 93
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 93 Others Symptom Playback The disc does not play. • Multilingual subtitle are not recorded on the DVD VIDEO. • The DVD VIDEO prohibits changing of the subtitles. • Try changing the subtitle using the DVD VIDEO's menu. The angles cannot be changed. • Multi-angles are not recorded on the DVD VIDEO being played. • You are trying to change the angles when icon does not appear on the TV screen (page 56). • The DVD VIDEO prohibits changing angles.
PAGE 94
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 94 Others Troubleshooting (cont’d) Symptom Remedy Remote control The remote does not function. • Batteries are weak. • There are obstacles between the remote and the DVD recorder. • The remote is far from the DVD recorder. • There are no batteries in the remote. • Turn on the DVD recorder. • The remote is not pointed at the remote sensor on the DVD recorder. Others The DVD recorder does not operate properly. • When static electricity, etc.
PAGE 95
E6501UD_DVR90DEA.qx3 04.3.
PAGE 96
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 96 Others Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high).
PAGE 97
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 97 Others Before you start Specifications General DVD-Video, DVD-R/RW, Audio CD AC120 V, 60 Hz 23 W (standby: 4.0 W) 6.0 lbs ( 2.
PAGE 98
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 98 Español Fácil grabación de DVD Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco Paso 2:Coloque un disco en blanco Mando a distancia Hay varias tipos de discos DVD grabables a su elección. Elija el tipo según "Tipos de disco DVD" en esta página.
PAGE 99
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 99 Español Before you start Fácil grabación de DVD (cont.) POWER DISPLAY TIMER PROG. OPEN/CLOSE Paso 4: Seleccione el canal deseado POWER DISPLAY TIMER PROG. CH REC MONITOR ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 TUV 8 WXYZ 9 SPACE 0 CM SKIP CH REC MONITOR .@/: 1 ABC 2 DEF 3 TIMER PROG. .
PAGE 100
E6501UD_DVR90DEA.qx3 04.3.17 16:28 Page 100 LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.