H9410UD(EN).qx33 03.1.17 6:21 PM Page 1 OWNER’S MANUAL EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. DVD PLAYER with VIDEO CASSETTE RECORDER EWD2203 ReWritable Recordable POWER OPEN/CLOSE CH-UP STOP REV PLAY FWD DVD OUTPUT REC VCR TIMER PLAY REW STOP/EJECT FF REC VIDEO AUDIO CH-DOWN PLAY DISC IN INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 3 IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 4 A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of all materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the DVD/VCR COMBINATION UNITS. This serial number is unique to your machine.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 5 TABLE OF CONTENTS ■ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3 ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SYMBOLS USED IN THIS MANUAL. . . . . . . . . . . . . . . . . . 4 ■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H9410UD(EN).qx33 03.1.17 6:21 PM Page 6 FEATURES ¡Virtual Surround DVD Mode ¡Component Video Out Jacks ¡Dolby Digital sound This DVD/VCR COMBINATION UNITS can handle Dolby Digital surround sound with 5.1 channels when connected to a Dolby Digital decoder.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 7 ABOUT THE DISCS PLAYABLE DISCS DISC TYPES The following discs can be played back on this DVD/VCR COMBINATION UNITS. [DVD] Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 8 OPERATING CONTROLS AND FUNCTIONS FRONT PANEL 1 2 3 5 4 6 7 POWER OPEN/CLOSE CH-UP STOP REV PLAY 8 FWD DVD OUTPUT REC VCR TIMER REW VIDEO PLAY STOP/EJECT FF REC AUDIO CH-DOWN PLAY DISC IN 25 24 23 22 21 REMOTE CONTROL 26 POWER SPEED 20 18 19 55 AUDIO 27 1 2 3 4 5 6 7 8 9 0 + 10 DVD VCR 54 SKIP/CH.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 9 18. OUTPUT Button [page 12] Press to select DVD mode or VCR mode. ● You can switch the output mode either by pressing OUTPUT on the front panel, or by pressing DVD or VCR on the remote control. However, if you press OUTPUT on the front panel first, you need to re-select the corresponding mode by pressing DVD or VCR on the remote control. 19. Remote Sensor Window 20. DISC IN Light (green) Light appears when a disc is in the DVD Player. 21.
H9410UD(EN).qx33 47. 48. 49. 50. 03.1.17 6:21 PM Page 10 bers during channel preset. s Button Press to cancel a setting of timer program. Press to correct digits when setting program (For example: setting clock or timer program). Press to add or delete channel numbers during channel preset. ENTER Button ● DVD mode [page 22] Press to accept a setting. g Button ● DVD mode [page 23] Press to fast forward the Disc. Press PAUSE, then press this button to begin slow motion playback.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 11 REAR VIEW 56 57 DVD/VCR AUDIO OUT 58 59 VCR 60 DVD S-VIDEO COMPONENT AUDIO OUT VIDEO OUT OUT ANT-IN L R DIGITAL AUDIO OUT Y AUDIO IN Cb L VIDEO IN Cr R COAXIAL ANT-OUT VIDEO OUT 66 65 64 63 56. ANT-IN (Antenna In) Jack Connect your antenna, Cable Box, or Direct Broadcast System. 57. DVD/VCR AUDIO OUT Jacks Connect the supplied audio cables here and to the Audio In jacks of a television or other audio equipment. 58.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 12 VCR/DVD SWITCHING Since this product comprises VCR and DVD players, it is necessary to select the correct output mode. SWITCHING TO VCR MODE SWITCHING TO DVD MODE Press VCR on the remote control. (Verify that the VCR OUTPUT Light is lit.) Press DVD on the remote control. (Verify that the DVD OUTPUT Light is lit.) Notes ¡Pressing only OUTPUT on the front panel does not switch the mode of the remote control.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 13 HOOKUPS CAUTION: ¡Be sure to turn off the DVD/VCR COMBINATION UNITS and equipment to be connected before connecting. ¡Read through the operation manual for the equipment to be connected. ¡Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 14 CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS FOR TVs WITH S-VIDEO INPUT JACK Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pictures. The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION UNITS.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 15 CONNECTING TO A DOLBY DIGITAL DECODER If using this DVD/VCR COMBINATION UNITS to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNITS outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 16 SETUP AUTOMATIC CHANNEL SET UP 5 Begin channel preset by pressing B once. VCR You can automatically program the tuner to scan only the channels you receive in your area. ¡Channel memory programming is NOT needed when you connect the VCR to a cable box or a satellite box as in "DVD/VCR TO TV CONNECTION" on page 13. In this case, select channel 3 on your TV. Then, the channel you want to record or view may be selected at the cable box or satellite box.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 17 TO ADD/DELETE CHANNELS CLOCK SET UP When scanning, some channels may be skipped due to a weak signal. In such cases, you can add the channels to the VCR memory manually. VCR 1 Select main menu by pressing MENU. 1 Press MENU until the main menu appears.(If you have already - MENU TIMER PROGRAMMING [OFF] REPEAT set the clock, you only have AUTO CHANNEL SET UP CLOCK SET LANGUAGE SELECT to press it once.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 18 PLAYBACK FUNCTION NORMAL PLAYBACK 2 Select "AUTO REPEAT" by pressing K or L. VCR 3 Begin auto repeat playback by pressing B so that ON appears next to "AUTO REPEAT". 1 Insert a prerecorded tape. The VCR will turn on. ¡If the safety tab has been removed, the ¡If the on-screen menu still remains, CLEAR/C.RESET to exit the menu. ¡To cancel the Auto repeat mode, press B at step [3] so that OFF appears next to "AUTO REPEAT". VCR will start playback automatically.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 19 RECORDING FUNCTION VCR It may be UNLAWFUL to record copyrighted material without the consent of the copyright owner. Accidental Erasure Prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the Record safety tab hole with cellophane tape. ¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 20 ¡When timer recordings are set, the TIMER light will 4) Set the start time ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME - - : - - - END TIME - - : - - - CHANNEL -REC SPEED - - come on. To use the VCR as usual until the time for the recording, press T-SET so that TIMER light disappears. Press VCR/TV to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 21 SPECIAL FEATURES COPYING A VIDEO TAPE 5 Press REC on the recording VCR. VCR You can make copies of video tapes made by friends or relatives for your enjoyment. Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR (this unit), the playing VCR (another source) and your TV using the following diagram.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 22 PLAYING A DISC BASIC PLAYBACK DVD-V CD Getting started ¡Turn on the power of the TV, amplifier and any other components which are connected to the DVD. ¡Make sure the TV and audio receiver (commercially available) are set to the correct channel. ¡Select DVD mode by pressing DVD on the remote control or output on the front panel.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 23 DISC MENU RESUME DVD-V 1 Press MENU. ¡The DVD main menu will appear. 2 If the feature is not available, DVD-V CD 1 During playback, press STOP. ¡Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the symbol point at which playback was stopped. ¡To cancel resume, press STOP twice. may appear on the TV screen.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 24 ZOOM DVD-V The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 Press ZOOM during playback. ¡Playback will continue. 2 Press ZOOM repeatedly to select the Using SKIP H G During playback, press SKIP G to move the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to beginning of the current track. Press it repeatedly to go to the previous tracks.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 25 REPEAT PROGRAM REPEAT are available only during playback. CD REPEAT TITLE / CHAPTER DVD-V To activate the repeat function, press REPEAT during playback. You may determine the order in which tracks will play. 1 In stop mode, press MODE. ¡The PROGRAM screen will appear. ¡The repeat mode changes as described below every 2 Press ▲ or ▼ to select a track, then press time you press the button.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 26 RANDOM PLAYBACK CD This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE twice. ¡RANDOM screen appears. RANDOM CD [AUDIO] TOTAL 0:45:55 Notes ¡Folders are known as Groups; files are known as Tracks. ¡MP3 files are accompanied by 3 icon. ¡Maximum of 255 folders can be recognized. ¡Maximum of 256 files can be recognized. ¡Up to 8 hierarchies can be created.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 27 RANDOM PLAYBACK SUBTITLE LANGUAGE MP3 DVD-V The DVD allows you to select a language for subtitles during DVD disc (if available) playback. 1 Press MODE twice while playback is stopped. 1 Press SUBTITLE during playback. 2 Press PLAY to play the tracks in random order. 2 Press SUBTITLE repeatedly to select your desired subtitle language. ¡The subtitle language will be displayed on the dis- PROGRAM play bar at the top of the screen.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 28 CHANGING THE ON-SCREEN DISPLAY DVD-V PARENTAL CONTROL DVD-V CD You can check the information about the current disc by pressing DISPLAY on the remote control. Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.) This feature allows you to prevent discs with alternative scenes from being played by your children.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 29 CONTROL LEVELS 2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6, ¡ALL 7, 8, 9, or 10 and ensure that “- : - - : - -” appears in the display. All parental lock is cancelled. ¡Level 8 DVD software of any grade (adult/general/children) can be played back. ¡Levels 7 to 2 Only DVD software intended for general use and children can be played back. 3 When reaches the desired point, press ENTER.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 30 BLACK LEVEL SETTING DISPLAY SETTING DVD-V DVD-V Adjust the Black Level Settings to make the black parts of the picture brighter. You can change certain aspects of the DVD display screens, and on-screen messages. 1 Press MODE during playback. 1 Press SETUP in STOP mode. 2 Press B to select CUSTOM, then press ON ENTER. ¡CUSTOM mode will appear. 2 Press ENTER to switch ON/OFF. 3 Press Arrow (s/ B) to select DISPLAY, then ON: Makes the dark parts brighter.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 31 LANGUAGE SETTING DVD-V Language options are not available with some discs. 1 Press SETUP in STOP mode. AUDIO: ¡Sets the audio language. SUBTITLE: ¡Sets the subtitle language. DISC MENU: ¡Sets the language for DVD menu. PLAYER MENU: QUICK ¡Sets the language for the On-screen display. 2 Press B to select CUSTOM, then press 5 Press Arrow (K/ L) to select a setting, then ENTER. press ENTER. ¡CUSTOM mode will appear.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 32 TROUBLESHOOTING GUIDE If the DVD/VCR COMBINATION UNITS does not perform properly when operated as instructed in this Owner's Manual, check the player consulting the following checklist. D V D V C R V C R D V D PROBLEM CORRECTIVE ACTION No power. • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. The player does not respond to. • Check if the power plug is connected to an AC outlet. the remote control.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 33 MAINTENANCE AUTO HEAD CLEANING SERVICING ¡Should your DVD/VCR COMBINATION UNITS become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-256-2487 to locate an Authorized Service Center. CLEANING THE CABINET ¡Use a soft cloth slightly moistened with a mild deter- gent solution.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 34 SPECIFICATIONS Product type: DVD player with Video Cassette Recorder Discs: DVD video Audio CD Video Cassette tape Converter output: VHF Channel 3 or 4. Power source: 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption: 24 W (standby: 7.0 W) Operating temperature: 41˚F (5°C) to 104˚F (40°C) Dimensions: W 17-1/8” (435 mm) H 4” (99 mm) D 8-7/10” (218 mm) Weight: 8.8 lbs (3.7 kg) ¡Designs and specifications are subject to change without notice.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 35 CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES PANEL DELANTERO 1 2 3 5 4 6 7 POWER OPEN/CLOSE CH-UP STOP REV PLAY 8 FWD DVD OUTPUT REC VCR TIMER REW REC VIDEO PLAY STOP/EJECT FF AUDIO CH-DOWN PLAY DISC IN 25 24 23 22 PANEL REMOTO 26 POWER SPEED 20 21 18 19 55 AUDIO 27 1 2 3 4 5 6 7 8 9 0 + 10 DVD VCR 54 SKIP/CH.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 36 22. Botón FWD (DVD) Presione para avanzar rápidamente el Disco. Presione el Botón PAUSE, luego presione el Botón FWD iniciar a reproducción en movimiento lento. Presione el Botón FWD repetidamente para cambiar la velocidad de avance del movimiento lento. Presione para saltar Capítulos o Pistas. 23. Botón PLAY (DVD) Comienza la reproducción del contenido del disco. 24.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 37 48. Botón g ● Modo DVD Pulse para avanzar rápidamente el disco. Pulse PAUSE, luego pulse este botón para comenzar la reproducción en movimiento lento. Pulse este botón en forma repetida para cambiar la velocidad de avance en movimiento lento. ● Modo VCR Pulse para avanzar rápidamente la cinta o para ver la imagen rápidamente en avance durante la reproducción (Búsqueda en avance). 49. Botón PLAY ● Modo DVD Presiónelo para iniciar la reproducción.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 38 CAMBIO DE VCR/DVD Como este producto se utiliza del reproductor VCR y DVD, es necesario cambiar uno del otro. CAMBIO AL MODO VCR CAMBIO AL MODO DVD Presione el Botón VCR en el control remote. (Verifique que la Luz VCR OUTPUT está enendida.) Presione el Botón DVD en el control remote. (Verifique que la Luz DVD OUTPUT está encendida) Notas ¡Presionando sólo el Botón OUTPUT en el panel delantero no cambia el modo del control remote.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 39 CONEXIONES DVD/VCR A CONEXIÓN DE TV CANAL DE SALIDA RF 1. Desconecte el cordón de alimentación AC del toma de corriente AC. 2. Desconecte la antena o cable del TV. 3. Conecte la antena o cable a la toma ANT.IN del DVD/VCR. 4. Conecte el DVD/VCR al TV utilizando el cable coaxial. 5. Enchufe los cordones de alimentación CA del DVD/VCR y TV dentro de las tomas de corriente AC. Si su TV no tiene terminals A/V: 1.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 40 REPRODUCCIÓN DE UN DISCO PREPARACIÓN DE RELOJ VCR REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO Ajuste el reloj con precisión para grabación con temporizador automática adecuada. Le sugerimos que usted utilice un TV o estación de radio como su fuente de tiempos. 1 Presione MENU dos veces para llamar el menú principal. (Si usted ha ajustado ya el reloj, usted sólo tiene que presionarlo una vez). ¡Si el reloj no está ajustado, aparece primero el menú CLOCK SET.
H9410UD(EN).qx33 03.1.
H9410UD(EN).qx33 03.1.
H9410UD(EN).qx33 03.1.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 44 LIMITED WARRANTY FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
