- Funai LCD TELEVISION Owner's Manual F20LCTE, F20LCTE-A

TO SELECT STEREO, MONO OR SAP
IN STEREO BROADCAST
Press MENU so that the set up menu appears on
the TV screen.
Press the CH ▼or ▲ to point to “TV SOUND”.
Press the VOL ▼or ▲ to select your desired
stereo mode. ([MAIN], [MONO] or [SAP])
3
2
1
You can listen to a TV program in MTS stereo.
To show the following status, press DISPLAY on the
remote control.
Press
MENU so that the set up menu appears on
the TV screen.
Press
CH ▼or ▲ to point “PICTURE”. Then
press VOL ▲.
Select the feature you wish to adjust with CH ▼
or▲ and adjust it with VOL ▼or ▲.
Note:
●
In the above steps, the picture adjustment display
will disappear from the TV screen automatically
after about 10 seconds if you do not press any
buttons. Press MENU and VOL ▲ so that
“PICTURE” is selected. Press CH ▼or ▲
repeatedly until the menu disappears.
3
2
1
- 11 - EN
-
BRIGHTNESS
+ -
CONTRAST
+ -
COLOR
+
-
TINT
+-
SHARPNESS
+
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [NORMAL]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [DARK]
: Press VOL ▼or ▲.
SAP: Second Audio Program, which means your
program, can also be received in a second language
or sometimes a radio station.
Type of
broadcast
Regular
-None-
ST EREO
SAP
Menu
Selection
MAIN
MONO
SAP
-None- -None-
MONO
ST EREO
SAP
MAIN
MAIN
Stereo
broadcast
: Press VOL ▼or ▲.
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MONO]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [SAP]
BACK LIGHT [BRIGHT]
PICTURE ADJUSTMENT
MTS (Multi-Channel Television
Sound) SYSTEM
Press MENU so that the set up menu appears on
the TV screen.
Press CH ▼or ▲ to point to “BACK LIGHT”.
Press the VOL ▼or ▲ to select the mode you
wish.
When done, press MENU to exit.
4
3
2
1
BACK LIGHT SELECTION
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
VOL
VOL
to decrease brightness to increase brightness
to decrease contrast to increase contrast
to pale to brilliant
to purple to green
to soft to clear
: Press CH ▼or ▲.
ENGLISH