Photo Printer FDP-100 User's Guide Introduction Prepare Printing from the camera Printing from the computer appendix We would like to take this opportunity to thank you for purchasing this Photo Printer. Please read this User’s guide carefully and keep it for future reference.
Contents Introduction IMPORTANT SAFEGUARDS ......................................................................... 4 Connection to Power (For UK)............................................................ 8 Introduction.................................................................................................... 9 Standard Accessories ......................................................................... 9 Notice....................................................................................
Contents Printing from the Camera Printing from the Camera (PictBridge Printing)........................................ 28 Connecting to the Camera ................................................................ 28 Printing from the Camera.................................................................. 29 Printing from the Computer System Requirements ................................................................................. 30 Windows ...........................................................
IMPORTANT SAFEGUARDS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS 10) Ventilation - Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the unit and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
IMPORTANT SAFEGUARDS Installation Location For safety and optimum performance of this unit: z Do not install the unit vertically. Install the unit in a horizontal and stable position. z Do not place anything directly on top of the unit. z Shield the unit from direct sunlight and keep the unit away from sources of intense heat. z Avoid dusty or humid places. z Use the unit at temperatures of 10°C - 35°C. z Avoid places with insufficient ventilation for proper heat dissipation.
IMPORTANT SAFEGUARDS Before Use z Please read this User’s guide carefully before using your photo printer, and keep it for future reference. z This unit is intended for household use only. For Customer Use: Read carefully the information located at the back of this unit and enter the Numbers below. Retain this information for future reference. Model No. Serial No.
Connection to Power (For UK) Before Switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. Mains Cord This appliance may be fitted with a nonrewireable plug. If it is necessary to change the fuse in a nonrewireable plug the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a replacement available from the appliance manufacturer is obtained.
Introduction z Please read the FUNAI SOFTWARE LICENSE AGREEMENT described on page 43 in this User’s guide carefully. Introduction Standard Accessories Please check and make sure that you have all items listed below: Paper tray AC adapter (UADPDCAATE02) Ink cartridge/Paper set (for 5 prints) Power cord - Quick Start Guide Cleaner CD-ROM - Printer driver - Application software - User’s guide z Refer to optional accessories (Paper/Ink cartridge) on page 22.
Introduction Copyrights z Whatever you have printed can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. Trademarks z Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries. z Macintosh and Mac OS are either registered trademarks or trademarks of Apple Computer Inc. in the United States and/or other countries.
Introduction Features Direct print Images in the camera which is compatible with PictBridge-standard can be printed easily by connecting with the printer. Printing from your computer Images can be printed from your computer. (Windows/Macintosh) Multiple image print (2/4/9/16 split) Same images can be printed on one sheet of paper. Index print* Images in the camera are printed as view format. 42 images can be printed on one sheet of paper.
Introduction Flow of the Printer Operation You can print in the following order. For actual operating, refer to the page indicated below. Insert the Ink cartridge.→ p.23 Set the paper.→ p.25, 26 Camera printing Computer printing Plug the power cord→ p.27 Install the printer driver. → p.31 Connect the camera with the printer.→ p.28 Print images from the camera. → p.29 Plug the power cord. → p.27 Connect the computer with the printer. → p.33 Print images from the computer.→ p.
Introduction Quick Guide Let’s try to print images by connecting the printer with the camera. z Refer to the pages below for the details. 1 Inserting the Ink cartridge.→ p.23 Make sure there is no slack in the Ink cartridge. a Open the Ink cartridge compartment door. 2 c Close the cover. b Insert the Ink cartridge until it clicks. Setting the paper.→ p.25, 26 a Open the Paper tray compartment door. b Slide and open the top cover. d Close the top cover.
Introduction 3 Connecting→ p.28 d Connect to the printer. a Connect to the printer. b Connect to the AC adapter. To power outlet e Connect to the camera. USB cable (supplied with the camera) c Plug the power cord. 4 Printing→ p.29 a Turn on the camera. b Operate the camera to print images. z Printing method varies depending on the camera models. Refer to the user’s guide of the camera.
Introduction Safety Precautions Before using the printer, read the safety precautions and follow them, or there may be fire, electric shock, injuries or malfunction. WARNINGS z Do not disassemble or remodel the printer. z Do not use the printer if the printer is dropped or the casing becomes damaged. z Unplug the power cord immediately if the printer emits smoke or abnormal odor, or shows other signs of significant malfunction.
Introduction CAUTIONS z Do not install the printer in the following places. − Smoky or dusty places − Places subject to direct sunlight − Steamy places − Places close to heating equipment − Places subject to high temperature such as sun-heated cars z Do not place heavy objects on the printer. z Do not get on top of the printer. z Unplug the power cord of the printer when the printer is not in use. z Do not move the printer while being plugged in.
Introduction Usage/Handling Note Location Notes z Do not install the printer in humid or dusty places. z Leave approx. 20 cm of clearance at the front/back side of the printer. Make sure to leave clearance around the paper-handling slot so that paper has room enough to jut out from the slot during printing. Do not let the cables get tangled around the paper-handling slot. z Do not install the printer near strong magnets or devices that produce strong electromagnetic fields.
Introduction Notes in Printing z Do not remove the Ink cartridge or Paper tray forcibly during printing. It may cause malfunction. z Do not add any oscillation or shock to the printer. It may cause malfunction. z Do not allow more than 10 sheets of printed paper to accumulate on the print output receptacle (on the top cover of the Paper tray). It may cause paper jam. z Do not touch the paper during printing. It may cause malfunction.
Introduction Prints Notes z Do not touch the printed surface with adhesive tape, rubber goods or plastic, etc., and do not leave the printed surface in contact with other objects. It may cause color loss, change of color or color transfer. z Select albums with nylon-based sleeves, polypropylene sleeves or cellophane sleeves for storing prints. Other type of sleeves may cause color loss or change of color.
Introduction Controls and Components Printer (Front view) POWER ACCESS ERROR a b c d e f g h Printer (Back view) l i 20 j k m
Introduction a [POWER] Lamp Lights up when the printer is plugged to the power outlet. Connect the printer to the AC adapter (supplied), and connect the AC adapter to the power outlet. b [ACCESS] Lamp Lights up when the printer is connected to the computer/camera. l USB Port Connects the USB cable (sold separately) to this port for using the printer with a computer. m PictBridge Port Connects the USB cable (supplied with the camera) to this port for using the printer with a PictBridgecompliant camera.
Introduction Paper/Ink cartridge Use the following paper. (Use the Ink cartridge included in the print set.) Postcard size paper (100 x 148 mm) Print set :FCP-40P Postcard size paper (40 sheets)/Ink cartridge (for 40 prints). z Do not disassemble the Ink cartridge. z Do not open the print set (paper/Ink cartridge) until you use it.
Prepare Please use the specified paper and Ink cartridge. Set the Ink Cartridge in the Printer 1 Confirm that there is no slack in the Ink cartridge. Ink ribbon z If the Ink ribbon is slack, turn a to the direction of the arrow pressing a in until the Ink ribbon is strained. (You cannot print allotted sheets of paper in the print set if you turn around a too much.) 2 Open the Ink cartridge compartment door. 3 Insert the Ink cartridge all the way into the Ink cartridge slot until it clicks.
Prepare How to Eject the Ink Cartridge 1 Open the Ink cartridge compartment door. 2 Press up the Ink cartridge eject lever. z The Ink cartridge is flipped out of the Ink cartridge slot. 3 Pull out the Ink cartridge horizontally. 4 Close the Ink cartridge compartment door. z Never reuse the Ink cartridge that has been already consumed. It may cause malfunction. z Do not touch the Ink ribbon or pull it out of the Ink cartridge. z Exchange a new Ink cartridge if it has worn out.
Prepare Set the Paper in the Paper Tray Do not use the paper other than the specified paper. 1 Slide the top cover of the Paper tray to the direction of the arrow. 2 Open the top cover. 3 Set the paper in the Paper tray with the print side (glossy side) facing upwards. z Do not set more than 20 sheets of the paper in the Paper tray. z Do not have the paper stuck out of the Paper tray. z Do not touch the print side of the paper. → p.
Prepare Set the Paper Tray in the Printer 1 Slide the top cover of the Paper tray to the direction of the arrow. 2 Open the Paper tray compartment door. 3 Insert the Paper tray horizontally into the Paper tray slot. How to reject the Paper Tray Pull the Paper Tray out horizontally and close the Paper tray compartment door.
Prepare Turning on the Power (Connecting) 1 Place the printer on a flat area. z Do not place any obstacles within 20 cm of the front/back side of the printer. Paper moves in and out to/from the slot during printing. 20cm 20cm 2 Connect the power cord to the AC adapter. 3 Connect the AC adapter to the DC IN terminal of the printer. To power outlet 4 Plug the power cord (connected to the AC adapter) into a power outlet. z The printer turns on, and the [POWER] lamp lights.
Printing from the Camera Printing from the Camera (PictBridge Printing) Connecting the camera with the printer, you can print images directly by the operation of the camera. z Images can be printed directly with the camera which is compatible with “PictBridge” standard. z It may be necessary to switch the camera to the “PictBridge” mode before connecting to the printer. Configure the setting of the camera according to the user’s guide of the camera.
Printing from the Camera Printing from the Camera 1 Perform the printing operation from the camera. z Printing operation is performed viewing the LCD monitor of the camera. z The operation method varies depending on the camera specification. Refer to the user’s guide of the camera. 2 The printer starts printing. z The paper is moved forward and backward several times and the printed paper exits on the top cover of the Paper tray. That is the end of printing process.
Printing from the Computer System Requirements Please install the printer driver on a computer meeting the following minimum requirements. Windows OS Windows XP (Including Service Pack 1 and Service Pack 2) Windows 2000 Service Pack 4 Computer Model The above OS should be pre-installed on computers with a built-in USB port.
Printing from the Computer Installing the Printer Driver The CD-ROM contains the printer driver required for printing from your computer. Install the printer driver according to the following steps. Windows z Be sure to install the printer driver before connecting the printer with the computer. (During the installation, if the message says that the printer should be connected to the computer, follow the message.
Printing from the Computer Macintosh z When installing on Mac OS X 10.2, be sure to connect the printer with the computer by the USB cable (commercial item) and turn on the printer before installing the printer driver. z When installing on Mac OS X 10.3, install the printer driver and then connect the printer with the computer by the USB cable (commercial item) and turn on the printer. z Be sure to log on with administrator privileges when installing the printer driver.
Printing from the Computer Connecting the Printer to a Computer z Connects the printer to the computer by the USB cable (A-B type / commercial item). z Confirm that a camera is not connected with the printer before connecting it to the computer. 1 Connect one end of the USB cable (commercial item) to the USB port on the printer and the other end to a USB port on your computer.
Printing from the Computer Printing from the Computer 1 Display/Select an image to be printed on your application. 2 Display the print screen and set the printer name to “FUNAI FDP100” (“FDP-100” (Mac OS)). z Printing and printer selection methods varies depending on the application. Refer to the user’s guide of your application. 3 Display the details screen. 4 Set “Print direction”, “Layout specification” and “No. of copies”.
Printing from the Computer 7 Start printing. z The status monitor is displayed while printing and the information such as file name and printing status are displayed on the status monitor. z Refer to "Error Messages" if error messages are displayed.→ p.36 z Depending on dimensions of an image, the whole image may not be printed. Not printed Image Uninstalling the Printer Driver Windows 1 2 Place the CD-ROM disc in the CD-ROM drive. 3 Follow the screen messages to proceed.
Appendix If Errors have Occurred... Error Messages When connecting with a camera: If an error (such as print error) has been detected when connecting with a camera, the error message is displayed on the LCD monitor of the camera. z The following is an example of error messages. z Error messages vary in some measure by the camera models. z Some cameras may have no error messages displayed on the LCD monitor.
Appendix Monitor Display Examples Other paper errors Status of the Printer/Solution of the printer at a time as the paper sticks together and like that. Turn off the printer and turn on again, so the paper is discharged from the printer. z Paper jam has occurred. Turn off the printer and turn on again, so the paper is discharged from the printer. File error Page z More than 2 sheets of paper are sent inside 40 z The printer failed to get DPOF setting information.
Appendix Before Requesting Services Troubleshooting If the printer is not responding properly, check the following items before requesting services. General printer problems Symptom Possible cause The [POWER] lamp does not light on. z The power cord or the AC adapter is not Print fails. z The Ink cartridge is not inserted with the connected correctly. correct orientation into the Ink cartridge slot firmly. z The Ink ribbon is slack. z The paper is not set.
Appendix Symptom Paper jams occur frequently. Possible cause page z More than 20 sheets of paper are set in the Paper tray. Up to 20 sheets of paper can be set. z The paper creases or warps. Use the flat paper. 25 - z Too many sheets of paper are accumulated on the print output receptacle (on top of the Paper tray). Do not allow more than 10 sheets of printed paper to be accumulated. The full picture is printed with upper/lower parts of the image cutting off.
Appendix Symptom More than 2 sheets of paper are printed. Possible cause camera, all of the DPOF setting images are printed. z The number of paper specified on the camera is printed. Prints has no shooting date. page z If the DPOF settings are configured on the z Shooting date (time) can be printed only if the date print function of the camera is activated. 29 Problems in printing from the computer Symptom Print fails.
Appendix Using the Cleaner Faint stripes or spots may be printed on the image if internal part of the printer gets dusty, Clear the printer out of dust or dirt in the following steps. 1 Press up the Ink cartridge eject lever and remove the Ink cartridge. → p.24 2 Insert the supplied cleaner as indicated, and move the cleaner in and out. z Even if images cannot be printed clearly after cleaning internal part of the printer, consult your dealer.
Appendix Specifications Main Specifications Photo printer Power source: 24 V Power consumption: approx. 60 W Operating temperature: 10°C- 35°C Operating humidity: 20-80 % Dimensions: 183.5 (W) × 71.0 (H) × 144.5 (D) mm (including protruding parts) Weight: approx.
Appendix FUNAI SOFTWARE LICENSE AGREEMENT PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE STORED IN THE CD-ROM IN THIS BOX! This document is a legal agreement ("Agreement") between you and FUNAI ELECTRIC CO., LTD. ("FUNAI") and governing your use of the software stored in the CD-ROM and the user manual in this box (including without limitation, sound data and image data, correctively, the "Software").
Appendix Software will be uninterrupted or error free. However, FUNAI or FUNAI's subsidiary warrants a medium on which the CD-ROM on which the Software is stored to be free of material or manufacturing defects under normal use and operating conditions for a period of ninety (90) days from the date of you obtained the same as evidenced by a receipt or otherwise. CUSTOMER REMEDIES.
Appendix 9. SEVERABILITY: In the event that any of the provisions of this Agreement proves to be invalid or illegal, that will not in no way affect, impair or invalidate any other provision, and all other provisions of this Agreement will be in full force and effect. 10. GOVERNING LAW: The terms and conditions of this Agreement are governed by the laws of Japan. Any litigation arising from the interpretation or execution of this license shall be submitted to Osaka District Court.