Operation Manual

13EN

CONNECTIONS

1 Connect the speaker cables to the matching colour sockets on the speakers.

2 Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit.

Make sure that the colours of the cables and sockets are matched.

This unit provides analogue and digital audio connection. You can connect the audio output from an audio / video

device (e.g. DVD Recorder, VCR, Cable / Satellite Box, game console or TV) to this Blu-ray Disc home theater in order to

enjoy the multi-channel surround sound capabilities.

• Use an audio cable (not supplied) to connect the AUDIO IN (AUX) jacks on the main unit to the audio output jacks on

the connected device.

• Use a digital audio coaxial cable (not supplied) to connect the DIGITAL AUDIO IN (Coaxial) jack on the main unit to the

digital audio coaxial output jack on the connected device.

Connecting Speakers and Subwoofer

Note

• To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV or

any other radiation sources.

Connecting Audio from Cable Box / Recorder / Game Console or TV

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

Note

• To listen to the audio output from these connections, select “Speakers” in “Audio Output” (refer to page 43) and

change the active source mode to the connected input. (Refer to “Switching Active Source Mode” on page 32.)

Front leftFront rightFront centre Rear leftRear rightSubwoofer

DIGITAL OUT

AUDIO OUT

DVD Recorder / VCR

Cable / Satellite Box

Your TV

Digital audio coaxial cable

Audio cable

INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS

E1T12ED_EN.book Page 13 Tuesday, August 3, 2010 5:13 PM