Operation Manual

14 EN
CONNECTIONS
Connect a 3.5mm stereo audio cable(not supplied) to
the MP3 LINE-IN jack on this unit and the headphone
jack on your portable media player.
1 Connect the supplied FM wire antenna to the FM
ANT 75Ω jack on this unit.
2 Extend the FM antenna and fix its ends to the wall
for optimum reception.
By connecting this unit to the Internet, you can update the
software via the Internet or access the BD-Live and vTuner
service.
Connecting Portable Media Player
No supplied cables are used in this connection:
Please purchase the necessary cables at your local
store.
Note
• To playback the audio from your portable media
player, refer to “Play from Portable Media Player” on
page 32.
Connecting FM Radio Antenna
Note
• For better FM stereo reception, connect an external
FM antenna (not supplied).
• Place the antenna away from your TV, VCR or other
radiation source to prevent any unwanted
interference.
• For FM radio playback, refer to “Radio Operations” on
page 32.
MP3 LINE-IN
OPEN/CLOSE
STANDBY/ON
STOPVOLUME
PLAY SOURCE
SD CARD MP3 LINE-IN
MP3
FM
ANT
75
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local
store.
Caution
• Do not insert any cable other than a LAN cable to the
LAN terminal to avoid damaging the unit.
Note
• After connecting a LAN cable, set up necessary
network settings. (For the network setup, refer to
“Network Connection” on pages 46-48.)
• For more information about the software update,
refer to “Network Update” on page 49.
• For more information about BD-Live, refer to
“Enjoying BD-Live Discs with Internet” on pages 27.
• For more information about vTuner, refer to “Enjoying
Internet Radio with vTuner” on page 33.
• If your network equipment (modem, etc.) does not
have broadband router functions, connect a
broadband router.
• If your network equipment (modem, etc.) has
broadband router functions but there is no vacant
port, use a hub.
• For a broadband router, use a router which supports
10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal
of this unit.
• Please purchase shielded LAN cables at your local
store and use them when you connect to network
equipment.
LAN
WAN LAN
12345
LAN cable
LAN cable
Networking equipment
(modem, etc.)
Hub or broadband router
Internet
E1T12ED_EN.book Page 14 Tuesday, August 3, 2010 5:13 PM