Operation Manual

39EN
FUNCTION SETUP
Category Menus / Options Description
Custom
Audio BD Audio Mode Mix Audio Output For BD, selects whether to
output the secondary and
interactive audio with primary
audio if it is available or only the
primary audio. Refer to “Setting
the BD Audio Mode” on page 30.
“Mix Audio Output”:
The audio for the secondary
video and the interactive
application will be output
together with the audio for the
primary video.
“HD Audio Output”:
Outputs only the primary audio.
Set this mode in order to output
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD
audio of BD through HDMI
connection.
HD Audio Output
Audio Output*
• Refer to page 43
for more
information.
Speakers “Speakers”:
Audio will be output from the
5.1ch speakers.
“HDMI Normal”:
The multi-channel audio signals
are output from HDMI OUT jack
with Bitstream or LPCM
depending on the material.
“HDMI LPCM”:
The multi-channel or stereo
audio signals are output from
HDMI OUT jack with LPCM.
HDMI Normal
HDMI LPCM
Speaker Setup
•This feature is
available only
when “Audio
Output” is set to
“Speakers”.
(Refer to page 43.)
Surround Effects
• Sets the surround
effect of audio
when the setting
of surround mode
is set to “Dolby Pro
Logic II Movie” or
“Dolby Pro Logic II
Music”. (Refer to
“Selecting
Surround Mode”
on page 31.)
Centre
Width
0~7
default is 3 Adjust the sound balance
between centre and front
speakers.
Dimension -3~3 default is 0 Adjust the sound balance
between front and rear
speakers.
Panorama
On “On”:
Sets the sound of centre speaker
to have surround-sound effect.
“Off”:
Sets the sound of centre speaker
to normal.
Off
Channel Level
• Tests or sets the
volume for each
speaker.
Test Tone
Off “Off”:
Deactivates the Test Tone.
“Manual”:
Allows you to manually select
the speaker to test.
“Auto”:
Automatically tests all speakers.
• To stop the test tone, press
[RETURN].
Manual
Auto
Front Lch
-10dB ~
+10dB
default is 0 Sets the volume level for each
speaker to get ideal audio
balance.
Center
default is 0
Subwoofer
default is 0
Front Rch
default is 0
Surround
Rch
default is 0
Surround
Lch
default is 0
Default Sets the volume level of all
speakers to the default setting.
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
E1T12ED_EN.book Page 39 Tuesday, August 3, 2010 5:13 PM