EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. 19” Digital LCD TV WATCHING TV ELPF?REE! H D E E N ALL TOLL 7 8 4 2 6 5 -800-2 EB SITE AT PLEASE C 1 OR VISIT OUR W INITIAL SETTING LC195EM9 B LC195EM9 2 LC195EM9 PREPARATION Owner’s Manual INTRODUCTION TM eo.com OPTIONAL SETTING udioVid mersonA www.E INFORMATION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
INTRODUCTION The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. Model No.: Serial No.: 5 Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
INTRODUCTION This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW. PREPARATION CAUTION: Danger of explosion if battery is incorrectly replaced.
INTRODUCTION 5 Supplied Accessories owner’s manual (1EMN23319) remote control (NF606UD) batteries (AA x 2) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.
Contents INTRODUCTION PREPARATION Basic Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Manual Register . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 5 Buttons on the Remote Control 1 2 3 11 12 13 14 4 CH. 15 16 5 6 7 8 9 10 1. POWER (p. 12) Press to turn the unit on and off. 2. MUTE (p. 14) Press to turn the sound on and off. 3. SLEEP (p. 14) Press to activate the sleep timer. 4. Number buttons (p. 14) • Press to select channels. - (hyphen) • Press to shift the minor channel from the major channel. 5. CH. K / L (p. 14) Press to select channels and the external input modes. 6. VOL. X / Y (p. 14) Press to adjust the volume. 7. ENTER (p.
INTRODUCTION 5 Control Panel side of this unit 2 3 5 1 4 5 6 Y VIDEO 2 COMPONENT Pb Pr S-VIDEO VIDEO INFORMATION 3 TROUBLESHOOTING 2 1. PC input jack (p. 11) VGA cable connection for PC. 2. antenna input jack (p. 8) RF coaxial cable connection for your antenna or cable/satellite box. 3. AC power cord Connect to a standard AC outlet to supply power to this unit. 4. component video and audio input jack (p. 9) RCA component video and RCA audio connection for external devices. 5.
PREPARATION Cables not included. Please purchase the necessary cables at your local store. 5 Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.
INTRODUCTION Cables not included. Please purchase the necessary cables at your local store. 5 External Device Connection RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component video input jacks, connect an RCA audio cable to the audio L/R jacks of VIDEO2. INITIAL SETTING e.g.
PREPARATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO 1.
INTRODUCTION Cables not included. Please purchase the necessary cables at your local store. PREPARATION [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor. e.g.) VGA cable should be with ferrite core.
INITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 Initial Setup Note: This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and auto channel scan, which automatically scans and memorizes viewable channels. Before you begin: Make sure if the unit is connected to antenna or cables. 1 After making all the necessary connections, press [POWER] to turn on the unit.
INTRODUCTION 5 Auto Channel Scan Note: If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan. Make sure if the unit is connected to antenna or cables. 1 Press [SETUP] to display the main menu. [ENTER].
WATCHING TV 5 Channel Selection 5 Volume Adjustment Select channels by using [CH. K / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. Use [CH. K / L] or [the Number buttons] to select the memorized channels. Use [VOL. X / Y] to adjust the audio volume. Volume or or or 20 • The volume bar will be displayed at the bottom of the TV screen when adjusting the volume.
5 Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. INTRODUCTION 5 Still Mode TV Still 1 Press [AUDIO ] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 6 INITIAL SETTING • The sound output will not be paused.
WATCHING TV 5 Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the analog mode, the current channel number and the audio mode are displayed. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Press [INFO ] to display the details of the currently selected program. Press [INFO ].
INTRODUCTION 5 TV Screen Display Mode 3-5 types of display modes can be selected when the unit receives 4:3 / 16:9 video signal or PC input signal. ] repeatedly to switch the TV For 4:3 video signal PREPARATION Press [SCREEN MODE aspect ratio. For 16:9 video signal INITIAL SETTING Wide Full Expand Wide Side Cut Cinema Cinema Zoom WATCHING TV (digital mode) Sidebar (analog / external input mode) OPTIONAL SETTING Full Full Select to display a 4:3 picture at its original size.
WATCHING TV For PC input signal Full Select to display a picture to fill the screen. Dot By Dot Select to display a picture in its original size. Normal *A Normal *B Note: • You may not switch the display mode depending on the program or resolution. • You can change the screen resolution on your PC. Full Dot By Dot Normal *A Select to display a vertically stretched picture without distorting the aspect ratio. The black bars appear on the left and right sides of the screen.
5 Manual Register The channel list function lets you remove undesired channels from the channel registration list. The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting. 1 Press [SETUP] to display the main menu. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K/L] to select “CHANNEL”, then press 2 Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].
OPTIONAL SETTING 5 Antenna Confirmation DTV This function lets you check the digital signal strength of each channel. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K/L] to select “CHANNEL”, then press [ENTER]. or 3 Use [Cursor K/ L] to select “Antenna”, then press [ENTER]. Channel or Autoscan Channel List Manual Register Antenna 4 Use [the Number buttons] or [CH. K/L] to select the channel for which you want to check the digital signal strength.
Cursor s You can adjust brightness, contrast, color, tint and sharpness. INTRODUCTION 5 Picture Adjustment Cursor B Brightness Brightness Move ENTER Enter Move ENTER Enter Move ENTER Enter Move ENTER Enter Move ENTER Enter to decrease brightness to increase brightness to decrease contrast to increase contrast to decrease color to brighten color to add red to add green to make soft to make clear PREPARATION 1 Press [SETUP] to display the main menu.
OPTIONAL SETTING 5 Sound Adjustment Reset Settings Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the sound settings to the default. You can adjust treble and bass. 1 Press [SETUP] to display the main menu. Reset Settings or Cancel This function resets the Sound settings to factory default. Reset 2 Use [Cursor K/L] to select “SOUND”, then press [ENTER]. 5 Press [SETUP] to exit. or Note: • To cancel sound adjustment, press [SETUP].
You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. Caption Mode CC1 and Text1; are the primary caption and text services. The captioning or text is displayed in the same language as the program’s dialogue (up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture). CC3 and Text3; serve as the preferred data channels.
OPTIONAL SETTING 5 DTV Closed Caption DTV In addition to the basic closed caption described on page 23, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. 1 Press [SETUP] to display the main menu. 5 Use [Cursor K/L] to select the desired DTV closed caption, then press [ENTER]. Closed Caption or Conventional CC DTV CC Off CC Style Service1 Service2 2 Use [Cursor K/L] to select “DETAIL”, then press Service3 Service4 [ENTER].
INTRODUCTION 5 CC Style You can change the CC style such as font, color or size, etc. CC Style or PREPARATION 6 Use [Cursor K/L] to select “On”, then press [ENTER]. 1 Press [SETUP] to display the main menu. Closed Caption User Setting On Font Style Off Font Size Font Color Font Opacity Back Color 2 Use [Cursor K/L] to select “DETAIL”, then press Back Opacity Edge Color or INITIAL SETTING Edge Type [ENTER]. 7 Use [Cursor K/L] to select an item, then press [ENTER].
OPTIONAL SETTING Font Color Edge Type Font color of the displayed caption can be switched as below. Edge type of the displayed caption can be switched as below. CC Style CC Style Closed Caption Closed Caption User Setting None Font Style White Font Style Raised Font Size Black Font Size Depressed Font Color Red Font Color Uniform Font Opacity Green Font Opacity L.Shadow Back Color Blue Back Color R.
INTRODUCTION 5 V-chip V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. PREPARATION See the following description for setting each item. 1 Press [SETUP] to display the main menu.
OPTIONAL SETTING A. MPAA Rating B. TV Rating MPAA Rating is the rating system created by MPAA (Motion Picture Association of America). 5 Use [Cursor K/L] to select “MPAA Rating”, then press [ENTER]. 5 Use [Cursor K/L] to select “TV Rating”, then press [ENTER].
INTRODUCTION C. New Password Although the default code “0000” is supplied with the unit, you can set your own password. 5 Use [Cursor K/L] to select “New Password”, then press Category Mature audience only higher TV-14 Unsuitable for children under 14 TV-PG Parental guidance suggested TV-G General audience TV-Y7 Appropriate for all children 7 and older [ENTER].
OPTIONAL SETTING 5 PC Settings This function lets you adjust the PC screen position, clock and phase during PC input. 5 Adjust the setting. 1 Press [SETUP] to display the main menu. Auto Adjustment Use [Cursor K / L] to select “Adjust”, then press [ENTER]. 2 Use [Cursor K/L] to select “DETAIL”, then press Auto Adjustment or [ENTER]. This function automatically adjusts the position, clock and phase of the picture element.
INTRODUCTION TROUBLESHOOTING 5 Troubleshooting Guide If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following chart and all connections once before calling for service. Remedy No power • Be sure the power cord is plugged in. • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself. No picture or sound • • • • No color • View other TV channels. The problem might be limited to the broadcasting station.
TROUBLESHOOTING 5 FAQ Question Answer My remote control does not work. What should I do? • Check the antenna or cable connection to the main unit. • Check the batteries of the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the signal output. If OK, then possible infrared sensor trouble. (Refer to “IR Signal Check” on page 33.) • Aim the remote control directly at the infrared sensor window on the front of the unit.
INTRODUCTION INFORMATION 5 Glossary Dolby Digital Password Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio. A stored 4-digit number that allows access to parental control features. Aspect Ratio HDTV (high definition TV) The width of a TV screen relative to its height.
INFORMATION 5 Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.
MEMO 35 EN A8AN5UH_A8AN3UH_A8AN1UH_EN.
TM LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: LABOR: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
EMERSON Y EL LOGOTIPO G-CLEF SON MARCAS REGISTRADAS DE EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, EE.UU. Manual del Usuario 7 8 4 2 6 5 -800-2 SITIO WEB EN LLAME AL TELE 1 ISITE NUESTRO ÓV eo.com udioVid mersonA AJUSTE OPCIONAL www.E PARA VER LA TELEVISIÓN ? UTITO! AYUFODNA O GRAT AJUSTE INICIAL LC195EM9 B LC195EM9 2 LC195EM9 PREPARACIÓN Televisión Digital con pantalla LCD de 19 pulgadas INTRODUCCIÓN TM INFORMACIÓN PARA RECIBIR LA SEÑAL DIGITAL/ ANALÓGICA, DEBE CONECTAR LA ANTENA.
INTRODUCCIÓN El modelo y el número de serie de esta unidad se pueden encontrar en la caja. Deberá anotar y guardar el modelo y el número de serie para consultarlos, si los necesita, en el futuro. Número de modelo: Número de serie: 5 Precauciones ADVERTENCIA: PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD.
INTRODUCCIÓN Este aparato no deberá colocarse en una instalación empotrada como, por ejemplo, una librería o estantería, a menos que disponga de una ventilación apropiada. Asegúrese de dejar un espacio libre de unos 2,8 pulgadas (7cm) alrededor de este aparato. AVISO: Si la pila se sustituye incorrectamente existe el riesgo de que se produzca una explosión. Sustitúyala siempre por otra de tipo equivalente.
INTRODUCCIÓN 5 Accesorios Suministrados manual del usuario (1EMN23319) mando a distancia (NF606UD) pilas (AA x 2) • Si necesita cambiar estos accesorios, consulte el número de pieza que aparece junto a las ilustraciones y llame a nuestro teléfono de atención al cliente, que encontrará en la portada de este manual. • Según su sistema de antena, puede necesitar diferentes tipos de combinadores (mezcladores) o separadores (divisores).
5 Contenido INTRODUCCIÓN PREPARACIÓN Conexión Básica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Conexión de Dispositivo Externo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AJUSTE INICIAL PARA VER LA TELEVISIÓN AJUSTE OPCIONAL SOLUCIÓN DE PROBLEMAS INFORMACIÓN Glosario. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Mantenimiento. . . . . . . . .
INTRODUCCIÓN 5 Botones en el Mando a Distancia 1 2 3 11 12 13 14 4 CH. 15 16 5 6 7 8 9 10 1. POWER (p. 12) Presione para activar y desactivar la unidad. 2. MUTE (p. 14) Presione para activar y desactivar el sonido. 3. SLEEP (p. 14) Presione para activar el temporizador de apagado. 4. Botones numéricos (p. 14) • Presione para seleccionar los canales. - (guión) • Presione para separar el canal menor del canal mayor. 5. CH. K / L (p.
parte lateral de la unidad 2 3 5 1 4 INFORMACIÓN 3 SOLUCIÓN DE PROBLEMAS 2 1. toma de entrada de PC (p. 11) Conexión del cable VGA para PC. 2. toma de entrada de antena (p. 8) Conexión de cable coaxial RF para su antena o caja de cable/satélite. 3. cable de alimentación de CA Conéctelo a una toma estándar de CA para suministrar alimentación eléctrica a esta unidad. 4. toma de entrada de vídeo en componentes y audio (p.
PREPARACIÓN Cables no incluidos. Deberá adquirir los cables necesarios en su establecimiento local. 5 Conexión Básica En esta sección se describe cómo conectar la unidad a una antena, caja de cable/satélite, etc. Nota: • Asegúrese de que su antena u otra dispositivo está conectada correctamente antes de enchufar el cable de alimentación. [Conexión de Antena] Conecte el cable coaxial RF de su toma de corriente a la toma de entrada de antena de esta unidad. p. ej.
INTRODUCCIÓN Cables no incluidos. Deberá adquirir los cables necesarios en su establecimiento local. 5 Conexión de Dispositivo Externo La conexión de vídeo en componentes RCA ofrece una mejor calidad de imagen para dispositivos de vídeo conectados a la unidad. Utilice un cable de vídeo RCA en componentes para conectar la unidad a dispositivos de vídeo externos equipados con tomas de salida de vídeo en componentes.
PREPARACIÓN Cables no incluidos. Deberá adquirir los cables necesarios en su establecimiento local. [Conexión de Vídeo] La conexión de vídeo RCA ofrece una calidad normal de imagen para dispositivos de vídeo conectados a la unidad. Utilice un RCA cable de vídeo en componentes para conectar la unidad a dispositivos de vídeo externos equipados con tomas de salida de vídeo en componentes.
INTRODUCCIÓN Cables no incluidos. Deberá adquirir los cables necesarios en su establecimiento local. PREPARACIÓN [Conexión de PC] Esta unidad está equipado con una toma de entrada de PC. Si conecta la unidad a su ordenador, puede utilizarlo como monitor. p. ej.) El cable VGA debe tener el núcleo de ferrita.
AJUSTE INICIAL Se puede acceder a estas operaciones mediante el mando a distancia. Algunas también pueden ser accesibles mediante los mandos de la unidad principal. 5 Configuración Inicial Nota: Esta sección le guiará a través del ajuste inicial de la unidad, que incluye la selección de un idioma para sus menús de pantalla y la exploración automática de canales, que explora y memoriza automáticamente los canales visibles.
INTRODUCCIÓN 5 Exploración Automática de Canales Nota: Antes de empezar: Asegúrese de que la unidad está conectada a la antena o al cables. 1 Presione [SETUP] para visualizar el menú principal. PARA VER LA TELEVISIÓN o 5 Selección de Idioma Puede elegir Inglés, Español o Francés como idioma de pantalla. 1 Presione [SETUP] para visualizar el menú principal. 3 Utilice [Cursor K / L] para seleccionar “Autoscan”, y luego presione [ENTER].
PARA VER LA TELEVISIÓN 5 Selección de Canal 5 Ajuste de Volumen Seleccione los canales utilizando [CH. K / L] o [los botones numéricos]. En esta sección se describe cómo ajustar el volumen. También se describe la función de silenciamiento, que activa y desactiva el sonido. Utilice [CH. K / L] o [los botones numéricos] para seleccionar los canales memorizados Utilice [VOL. X / Y] para ajustar el volumen de audio.
5 Para Cambiar el Modo de Audio Puede fijo la imagen mostrada en la pantalla del televisor. En esta sección se describe cómo cambiar el audio en el modo analógico y cómo cambiar el idioma de audio en el modo digital. INTRODUCCIÓN 5 Modo Fijo TV [AUDIO ] para mostrar por pantalla el 1 Presione modo de audio actualmente seleccionado. Durante la recepción de una emisión MTS, presione repetidamente para recorrer los canales de audio disponibles.
PARA VER LA TELEVISIÓN 5 Información de Pantalla Puede visualizar el canal actualmente seleccionado u otra información, por ejemplo el modo de audio, en la pantalla del televisor. DTV TV En el modo analógico se visualizan el número del canal actual y el modo de audio. En el modo digital se visualiza la información de emisión detallada para el canal actual como, por ejemplo, el título del programa y las guías de programas.
INTRODUCCIÓN 5 Modo de Visualización de Pantalla del Televisor Se pueden seleccionar entre 3 y 5 modos de visualización cuando la unidad recibe una señal de video de 4:3 / 16:9 o la señal de entrada de la PC. PREPARACIÓN Presione [SCREEN MODE ] repetidamente para cambiar la relación del aspecto del televisor.
PARA VER LA TELEVISIÓN Para señal de entrada PC Total Seleccionar para visualización de una imagen para llenar la pantalla. Punto Por Punto Normal *A Normal *B Seleccionar para visualización de una imagen en su tamaño original. Nota: • Según el programa o resolución, es posible que el modo de visualización no cambie. • Puede cambiar la resolución de pantalla de su PC.
5 Registro Manual La función Lista de canales le permite eliminar los canales no deseados de la lista de inscripción de canales. La función de registro manual permite agregar los canales que no se agregaron mediante la exploración automática de canales debido al estado de la recepción en el ajuste inicial. 1 Presione [SETUP] para visualizar el menú principal. 1 Presione [SETUP] para visualizar el menú principal.
AJUSTE OPCIONAL 5 Confirmación de la Antena DTV Esta función le permite comprobar la intensidad de la digital señal de cada canal. 5 Presione [SETUP] para salir. 1 Presione [SETUP] para visualizar el menú principal. Utilice [Cursor K / L] para seleccionar “CANAL” y luego 2 presione [ENTER]. o Utilice [Cursor K / L] para seleccionar “Antena”, y luego 3 presione [ENTER]. Canal o Autoscan Lista Canales Registro Manual Antena [los botones numéricos] o [CH.
Puede ajustar el brillo, el contraste, el color, el matiz y la nitidez. Claridad Claridad 30 Ajuste Entre Mover ENTER Entre Mover ENTER Entre Mover ENTER Entre Mover ENTER Entre Contraste Contraste 30 Ajuste Color Utilice [Cursor K / L] para seleccionar “IMAGEN”, y 2 luego presione [ENTER].
AJUSTE OPCIONAL 5 Ajuste de Sonido Restablecer Ajustes Utilice [Cursor K / L] para seleccionar “Restablecer”, y luego presione [ENTER] para cambiar el ajustes sonido al ajuste inicial. Puede ajustar el treble y el bajo. 1 Presione [SETUP] para visualizar el menú principal. Restablecer Ajustes o Cancelar Esta función restaura los ajustes de sonido a los valores de fábrica. Restablecer Utilice [Cursor K / L] para seleccionar “SONIDO”, y 2 luego presione [ENTER]. o 5 Presione [SETUP] para salir.
Puede ver los subtítulos (cc) para programas de televisión, películas e informativos. Subtítulo se refiere al texto de diálogo o descripciones visualizadas en pantalla para personas con problemas auditivos. Modo de Subtítulos S.C.1 y Texto1; son los servicios primarios de subtítulos y texto. Los subtítulos o el texto se muestran en el mismo idioma que el diálogo del programa (hasta 4 líneas de escritura sobre la pantalla del televisor, sin tapar zonas relevantes de la imagen).
AJUSTE OPCIONAL 5 Subtítulos en DTV DTV Además de los subtítulos básicos descritos en la página 23, DTV tiene sus propios subtítulos denominados DTV CC. Utilice este menú para cambiar la configuración de DTV CC. 1 Presione [SETUP] para visualizar el menú principal. [Cursor K / L] para seleccionar los subtítulos 5 Utilice DTV deseados, y luego presione [ENTER]. Subtítulo Cerrado o S.C. Convencional S.C. DTV Off Estilo S.C.
INTRODUCCIÓN 5 Estilo CC Puede cambiar el estilo de CC, por ejemplo fuente, color o tamaño, etc. [Cursor K / L] para seleccionar “On”, y luego 6 Utilice presione [ENTER]. Estilo S.C. o PREPARACIÓN 1 Presione [SETUP] para visualizar el menú principal. Subtítulo Cerrado Config. Usuarid On Estilo Fuente Off Tamaño Fuente Color Fuente Utilice [Cursor K / L] para seleccionar “DETALLE”, y 2 luego presione [ENTER].
AJUSTE OPCIONAL Color Fuente Tipo Borde El color de fuente del subtítulo mostrado puede cambiarse como sigue. El tipo de borde del subtítulo mostrado puede cambiarse como sigue. Estilo S.C. Estilo S.C. Subtítulo Cerrado Config. Usuarid Subtítulo Cerrado Config. Usuarid Ninguno Estilo Fuente Blanco Estilo Fuente Elevado Tamaño Fuente Negro Tamaño Fuente Hundido Rojo Color Fuente Uniforme Opaco Fuente Verde Opaco Fuente Sombra Izq. Color Fondo Azul Color Fondo Sombra Der.
INTRODUCCIÓN 5 V-chip V-chip lee las clases de los programas, y niega el acceso a los programas que exceden el nivel de clasificación establecido. Con esta función, puede bloquear determinados programas inapropiados para niños. PREPARACIÓN Consulte la siguiente descripción para ajustar cada elemento. 1 Presione [SETUP] para visualizar el menú principal. V-chip Clase de MPAA Clase de TV A B Clasif. inglés canad. Clasif. francés canad.
AJUSTE OPCIONAL A. Clase de MPAA B. Clase de TV Clase de MPAA es el sistema de clasificación creado por la MPAA (Motion Picture Association of America). [Cursor K / L] para seleccionar “Clase de MPAA”, [Cursor K / L] para seleccionar “Clase de TV”, y 5 yUtilice 5 Utilice luego presione [ENTER]. luego presione [ENTER]. V-chip o V-chip o Clase de MPAA Clase de MPAA Clase de TV Clase de TV Clasif. inglés canad. Clasif. inglés canad. Clasif. francés canad. Clasif. francés canad.
INTRODUCCIÓN C. Nuevo Código de Acceso Aunque el código predeterminado “0000” viene incorporado con la unidad, usted puede ajustar su propia contraseña. [Cursor K / L] para seleccionar “Nuevo Código 5 Utilice de Acceso”, y luego presione [ENTER]. Categoría TV-MA Exclusivamente para público adulto TV-14 No apto niños menores de 14 años TV-PG Se sugiere orientación de los padres TV-G Todos los públicos superior V-chip o Clase de MPAA Clase de TV Clasif. inglés canad. Clasif. francés canad.
AJUSTE OPCIONAL 5 Ajustes de PC Esta función le permite ajustar la posición de la pantalla del ordenador, el reloj y la fase durante la entrada PC. 5 Haga el ajuste. 1 Presione [SETUP] para visualizar el menú principal. Ajuste Automático Utilice [Cursor K / L] para seleccionar “Ajuste”, y luego presione [ENTER]. Utilice [Cursor K / L] para seleccionar “DETALLE”, y 2 luego presione [ENTER].
INTRODUCCIÓN SOLUCIÓN DE PROBLEMAS 5 Guía de Solución de Problemas Si la unidad no funciona correctamente cuando se siguen las instrucciones de este manual del usuario, compruebe la siguiente tabla antes de llamar al servicio técnico. PREPARACIÓN Síntoma Solución • Asegúrese de que el cable de alimentación está enchufado. • Si se produce un corte de alimentación, desenchufe el cable de alimentación durante 30 minutos para permitir que la unidad se reinicie.
SOLUCIÓN DE PROBLEMAS 5 Preguntas Frecuentes Pregunta Respuesta Mi control remoto no funciona. ¿Qué debo hacer? • Compruebe la conexión de antena o de cable con la unidad principal. • Compruebe las pilas del mando a distancia. • Compruebe si hay algún obstáculo entre la ventana del sensor de infrarrojos y el mando a distancia. • Pruebe la salida de la señal. Si es correcta, es posible que haya algún problema con el sensor de infrarrojos.
INTRODUCCIÓN INFORMACIÓN 5 Glosario Acrónimo de “Advanced Television Systems Committee” (Comité de sistemas avanzados de televisión) y el nombre de unas normas de emisión digital. Acrónimo de “National Television Systems Committee” (Comité de sistemas nacionales de televisión) y el nombre de unas normas de emisión analógica. Contraseña Relación de Aspecto Un número almacenado de 4 dígitos que permite el acceso a las funciones de control parental.
INFORMACIÓN 5 Denominaciones de Canales de Cable Si se suscribe a la televisión por cable, los canales se muestran como 1-135. Las empresas de cable a menudo denominan los canales con letras o combinaciones de letra-número. Compruebe este detalle con su empresa local de cable. La tabla siguiente incluye las denominaciones de canal de cable habituales.
MEMO 35 ES A8AN5UH_A8AN3UH_A8AN1UH_ES.
TM GARANTÍA LIMITADA FUNAI CORP. reparará este producto, de forma gratuita en Estados Unidos, en caso de defecto de materiales o fabricación, del modo siguiente: DURACIÓN: PIEZAS: FUNAI CORP. suministrará piezas de repuesto de las piezas defectuosas de forma gratuita durante un (1) año desde la fecha de compra minorista original. Determinadas piezas y el efecto de persistencia de la imagen en la pantalla LCD están excluidas de esta garantía. MANO DE OBRA: FUNAI CORP.