LED22-H820M LED19-H820M Telewizor LCD Instrukcja obsługi Polski LCD-TV-Gerät Bedienungsanleitung Deutsch LCD-televízió Használati Utasítás Magyar Televizor LCD Manualul utilizatorului Român LCD televizor Uživatelská příručka Čeština LCD televízor Príručka používateľa Slovenčina Télévision LCD Manuel du propriétaire Français LCD-teler Kasutusjuhend Eesti keel LCD televizors Lietotāja rokasgrāmata Latviešu LCD televizorius Instrukcija Lietuviškai LCD Television Owner’s Manual English ЖК
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers are located at the rear of the unit. Model number:_________________ Serial number:_________________ PRECAUTIONS WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
INTRODUCTION A Note about Recycling This unit's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. This product consists of materials which can be recycled and reused if disassembled by a specialised company. Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste.
Supplied Accessories Fixing the Unit on Your Furniture • Remote Control • Batteries (R03/AAA, 1.5V x 2) • Owner's Manual • Screw kit for attaching the base Screw this unit on your furniture tightly using wood screw (not supplied) in the hole at the back of the base as shown. • Recommended screw dimension : 5.1 x 20 mm Rear of this unit Symbols Used in this Manual The followings are the description for the symbols used in this manual. If neither symbol appears, the operation is applicable to both.
Your TV 26 9 27 8 28 22 29 1 31 35 34 32 33 30 11. RED/GREEN/YELLOW/BLUE (p. 9, 16, 18) Uses for EPG / teletext / FUN-LINK. 12. COLOUR SYSTEM (p. 8) Selects the colour input signal from external devices. 13. FUN-LINK buttons (p. 17) Functionally useful for FUN-LINK. 14. (expand) / (subpage) / (hold) / (text) / (reveal) / (index) (p. 17) 15. SOURCE (p. 8) 16. MODE (DTV/ATV) Selects digital or analogue mode. 17. ASPECT (p. 11) 18. GUIDE (p. 9) 19. ECO (p. 8) 20. I (information) (p. 9) 21.
PREPARATION FOR USE SCART Connection Read this first Your device • No supplied cables are used with these connection. Please purchase the necessary cables at your local store. • Illustration in the following connection are example. Read the manual accompanying your device for more detail. • Before you connect, be sure your antenna or other device is connected properly before plugging in the AC power cord.
Initial Setup PC Connection This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and auto scan, which automatically scans and memorises viewable channels. VGA cable with ferrite core 1 After making all the necessary connections, press Q to turn the unit. 2 Use K / L repeatedly to select the menu language, the country and the region, then press OK.
1 OPERATIONS Press SLEEP repeatedly to change the sleep time period. • Each time you press SLEEP, the timer increases by 30 minutes up to 120 minutes. Read this first These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Watching a TV Programme • Press SLEEP repeatedly until [Off] appears to cancel the sleep timer. • If you disconnect the unit from the AC outlet or if a power failure occurs, the sleep timer will be cancelled.
13 Scrambled programme ATV Press AUDIO to display currently selected audio mode and press repeatedly to cycle through the available audio mode. 14 Parental rating (p. 15) (e.g.) Nicam Stereo Mono Nicam Nicam Nicam Dual1 Dual2 Stereo 15 Lock status (p. 15) Mono Nicam Mono Mono Stereo Mono Dual1 Dual2 Stereo 2 is displayed, when you are watching the scrambled programme. is displayed if the parental rating of TV programme is available. * The icon may differ depending on the ratings.
MP3/JPEG Playback This unit can play MP3 music and JPEG picture files. Use the USB flash memory contains those files. 1 Insert the USB flash memory to the USB terminal of this unit (shown below), then the main menu appears automatically. Your TV • The USB flash memory is not supplied with this unit. • The unit recognise a USB flash memory only. Do not use a USB hub and an extension cord between the USB flash memory and the unit. Always insert the USB flash memory to this unit directly.
Show Details (RED): Press RED to display file details below. [Title], [Artist], [Album], [Duration] and [Year]. Press RED again to remove file details. Shuffle (YELLOW): Press YELLOW to playback the music randomly.To return to the normal playback, press YELLOW again. Repeat (GREEN): Press GREEN to change entire folder repeat the repeat mode. Changing the TV Screen Display Mode You can select your favourite TV screen size. Press ASPECT mode.
OTHER SETTINGS Features PICTURE Read this first SOUND Before adjust each setting, press MENU to display the menu. To exit the menu, press MENU. CHANNEL Use K / L to select [PICTURE], then press OK. SOUND CHANNEL OTHERS LANGUAGE On Backlight Brightness 30 Contrast 42 Colour 30 Hue 0 Sharpness 0 Features Picture Mode Use K / L to select [Picture Mode], then press OK. Use K / L to select the setting you want, then press OK.
Sound Adjustment Auto Volume Control You can adjust the sound settings according to your personal preferences. If set to [On], sudden changes in volume will be reduced automatically, for example, during commercials or when switching channels. 1 2 Use K / L to select [Auto Volume Control], then press OK. 3 Use K / L to select the setting you want, then press OK. ([On] or [Off]) Use K / L to select [SOUND], then press OK.
Channel Scan Channel Skip When using skipped. 4 / , the channel you selected will be Use K / L to select [Skip], then press OK. • will appear on the right of the channel. • Press OK again to cancel, and will disappear. You can scan the channel in your area automatically or search and store channels manually. 1 Use K / L to select [CHANNEL], then press OK. Auto Scan Channel Delete 2 The channel you selected will be deleted from the channel list. Use K / L to select [Auto Scan], then press OK.
Colour System / Sound System 8 9 Change PIN Code Follow steps 1 to 7. Use K / L to select [Colour System] or [Sound System], then press OK. PICTURE New PIN Code - - - - Confirmation - - - - SOUND Use K / L to select the settings you want, then press OK. CHANNEL OTHERS Fine Tune LANGUAGE 8 Follow steps 1 to 7. Use K / L to select [Fine Tune], then press OK. 9 Use 0 / 1 to select the settings you want, then press OK.
Mixing Level You can adjust the audio volume for [Visually Impaired]. Make sure [Audio Type] is set to [Visually Impaired] at “Audio Settings” (p. 15). • Only MPEG sound is available for this function. 4 5 Use K / L to select [Mixing Level], then press OK. Use 0 / 1 to adjust, then press OK. Teletext You can change the teletext settings. 1 2 3 Use K / L to select [TV Settings], then press OK. Use K / L to select [Teletext], then press OK.
• If you want to select other pages, use the Number buttons or K / L. • To enlarge fonts, press PC Settings PICTURE . Auto Adjustment • To select the teletext subpages, press . • To directly select the page numbers shown at the bottom of the TV screen, use RED/GREEN/YELLOW/BLUE.
4 On Off Use K / L to select [On] or [Off], then press OK. : Selects if you have connected an external device that is compatible with the FUN-LINK function. : Disables all FUN-LINK functions. • The following additional settings will be greyed out when you set to [Off]. To show the menu of connected your devices Make sure [FUN-LINK Control] and [Device Control] is set to [On]. 1 2 Press FUN-LINK Use K / L to select the item you want, then press OK.
Auto Standby You can set the unit to go standby mode automatically if no activity is detected after the power is turned on for 4 hours. In spite of this setting, the unit goes to the standby mode automatically if there is no signal input from the antenna terminal and no user operation for 15 minutes. 3 4 Use K / L to select [Auto Shut Off], then press OK. Menu Language Selection You can select the menu language. 1 2 Use K / L to select [LANGUAGE], then press OK.
TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money. Problem Possible Remedy • Is unit plugged in? Remote Control Doesn’t Work • Power at outlet? • Check batteries in remote control. • If outside antenna is being used, check for broken wire. Bars On TV Screen • Check for local interference.
OTHER INFORMATIONS Specifications Model LCD Television system Terminals Antenna Audio Input Composite Video Input Component Video Input HDMI Input PC Input SCART Headphone Coaxial digital audio Output USB Input Common Interface Sound Output Remote control Operating temperature range Power requirements Power consumption Dimensions without base *Protruding parts excluded. with base Weight LED22-H820M LED19-H820M 21.6 inches 18.5 inches DVB-T(MPEG4/H.
Declaration of conformity Cabinet Cleaning This product complies with the requirement of the related directives. • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. We: Funai Electric Europe Sp. z o.o. ul.
License Statement GPL GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
NO WARRANTY 11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
Web Site: http://www.funai.