Operation Manual

EN
16
3 Press BACK to turn off the teletext decoder.
Common Interface (CI)
This unit is equipped with a CI slot. You can enjoy additional
services with this function, for example Pay TV. The access
restrictions menu will appear on the TV screen when a CI
module is installed.
1 Go to the standby mode and unplug from an AC outlet.
2 Insert the CI module straight to the CI slot of this unit.
3 Plug this unit into an AC outlet and press Q to turn on
the unit.
4 Press MENU to display the menu.
5 Use K / L to select [OTHERS], then press OK.
6 Use K / L to select [TV Settings], then press OK.
7 Use K / L to select [Common Interface], then press
OK.
8 Follow the instructions on the TV screen.
PC Settings
You can adjust the PC screen position, clock and phase.
Before you begin: You must connect your PC to this unit and
select [PC] at “Switching the Input Mode” (p. 8).
1 Use K / L to select [OTHERS], then press OK.
2 Use K / L to select [PC Settings], then press OK.
Auto Adjustment
3 Use K / L to select [Auto Adjustment], then press
OK.
• Auto adjust confirmation message will appear.
4 Use K / L to select [Adjust], then press OK.
• Each setting will be adjusted automatically.
Horizontal Position / Vertical Position / Clock / Phase
3 Use K / L to select the item you want, then press OK.
•Use K / L to change the items.
4 Use 0 / 1 to adjust the settings according to your
personal preference, then press OK.
FUN-LINK
This function allows you to operate the linked functions
between our brand devices with a FUN-LINK feature and this
unit connecting through an HDMI cable.
1 Use K / L to select [OTHERS], then press OK.
2 Use K / L to select [FUN-LINK], then press OK.
FUN-LINK Control
You can set the FUN-LINK function On or Off.
3 Use K / L to select [FUN-LINK Control], then press
OK.
• If you want to select other pages, use the Number buttons or
K / L.
• To enlarge fonts, press .
• To select the teletext subpages, press .
• To directly select the page numbers shown at the bottom of the
TV screen, use RED/GREEN/YELLOW/BLUE.
• To call up the hidden information, press .
• To hold the current page, press .
• To go back to the start page, press .
• To hide the teletext, press SLEEP.
• Some CI modules may be a two-piece design consisting of a card
reader with the viewing card. When using this kind of card, insert
the card reader firmly into the CI slot on the unit first. Then, insert
the viewing card into the reader.
• CI may not available in some countries or region.
• In case of failure, you need to call your CI service provider.
• Menu operations may vary depending on the viewing card. Refer
to the manual accompanying the viewing card.
DTV
• The set with FUN-LINK will interoperate without any problems
with other Funai devices which comply with FUN-LINK.
0
0
0
0
PC Settings
PC Settings
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Auto Adjustment
Horizontal Position
Vertical Position
Clock
Phase
--
--
--
FUN-LINK
FUN-LINK
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
FUN-LINK Control
Auto Device Off
Auto TV On
Device Control
Device List
Off