Operation Manual

EN
18
Auto Standby
You can set the unit to go standby mode automatically if no
activity is detected after the power is turned on for 4 hours.
In spite of this setting, the unit goes to the standby mode
automatically if there is no signal input from the antenna
terminal and no user operation for 15 minutes.
3 Use K / L to select [Auto Shut Off], then press OK.
4 Use K / L to select [On] or [Off], then press OK.
Software Download
Software download complies in specified countries only. You
may not use this function depending on where you live.
1 Use K / L to select [OTHERS], then press OK.
2 Use K / L to select [Software], then press OK.
Auto Update Search
When you set to [On], this unit in standby mode detects and
update a new version of software automatically.
3 Use K / L to select [Auto Update Search], then press
OK.
4 Use K / L to select [On] or [Off], then press OK.
Search for new software
You can search for new version of software.
3 Use K / L to select [Search for new software], then
press OK.
• When this unit found a new version of software,
software update confirmation menu will appear.
4 Use K / L to select [Start] to update the software.
• Software updating will start.
5 After the software update is completed, press Q to
restart this unit.
Factory Reset
You can restore this unit to factory settings.
1 Use K / L to select [OTHERS], then press OK.
2 Use K / L to select [Factory Reset], then press OK.
3 Use K / L to select [Reset], then press OK.
• All the settings are restored to the default even
memorised channels, picture settings, and sound
settings.
Menu Language Selection
You can select the menu language.
1 Use K / L to select [LANGUAGE], then press OK.
2 Use K / L to select the language you want, then press
OK.
• Power indicator lights up while the unit searches or updates the
software.
• This process may take up to 60 minutes.