2.
. A'0 HO 2CIG /QPFC[ ,WPG #/ PRECAUTIONS To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers are located at the rear of the unit. Model number:_________________ Serial number:_________________ PRECAUTIONS WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ INTRODUCTION Contents PRECAUTIONS ......................................................................2 INTRODUCTION..................................................................3 Supplied Accessories ................................................................................4 Symbols Used in this Manual ...............................................................4 Attaching the Base .........................................................
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Supplied Accessories • Remote Control • Batteries (R03 / AAA, 1.5 V x 2) • Owner's Manual • Screw kit for attaching the base • AC power cord Symbols Used in this Manual The followings are the description for the symbols used in this manual. If neither symbol appears, the operation is applicable to both. DTV Digital TV operation ATV Analogue TV operation Adjusting the Swivel Angles You can adjust the viewing angle of your TV.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Your TV 12. 26 23 13. 10 24 21 14. 15. 15 25 8 1 26 34 33 29 31 28 16. 17. 18. 19. 20. 21. 32 30 27 22. RED / GREEN / YELLOW / BLUE (p. 8, 9, 10, 11, 20, 22) Uses for EPG / teletext / fun-Link. buttons (p. 22) Functionally useful for fun-Link. (expand) / (subpage) / (hold) / (text) / (reveal) / (index) (p. 20) SOURCE (p. 9) SOURCE (control panel) works same function as OK to determine the setting menu. PICTURE MODE (p. 15) SOUND MODE (p.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ PREPARATION FOR USE SCART Connection Read this first • No supplied cables are used with these connection. Please purchase the necessary cables at your local store. • Illustration in the following connection are example. Read the manual accompanying your device for more detail. • Before you connect, be sure your antenna or other device is connected properly before plugging in the AC power cord.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Initial Setup PC Connection This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and auto scan, which automatically scans and memorises viewable channels. VGA cable with ferrite core Your device RGB PC-IN AUDIO LINE OUT PC-IN AUDIO 1 After making all the necessary connections, turns on the unit using the main power switch, then press .
2. A'0 HO 2CIG /QPFC[ ,WPG #/ OPERATIONS Sleep Timer The sleep timer can be set the unit to go to the standby mode after an incremental period of time. Read this first These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Watching a TV Programme To select a channel Use / repeatedly to select your desired channel, or use the Number buttons to enter a channel number, then press OK for quicker access. (e.g.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ TV Screen Information EPG (Electronic Programme Guide) You can see the broadcasting information. 1 Press to display fewer information and press again more information will appear. DTV You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programmes. 1 Press GUIDE and use Ÿ¬/¬ź to select a channel.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Photo / Music / Video Playback This unit can play JPEG picture and MP3 / WAVE music and DivX® video files. Use the USB flash memory contains those files. Before you begin: You must insert the USB flash memory to USB terminal of this unit (shown below) and select [USB] at [Select Input]. Refer to “Switching the Input Mode” (p. 9).
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Playing Operation Operation in Playback Transition (GREEN) : (PLAY) / Press MENU and then use Ÿ¬/¬ź to select [Transition], and press OK, then use Ÿ¬/¬ź to select the way of transition mode below, and then press OK. • [None], [Dissolve], [Wipe right], [Wipe left], [Wipe up], [Wipe down], [Box in], [Box out] and [Random]. While the menu is not displayed, press GREEN repeatedly to change transition of the slideshow in order.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Video AUDIO Press to change the audio track. • This operation is available, if the file contains more than one audio track. Repeat : Title: Director: Press MENU and use Ÿ¬/¬ź to select [Repeat], then press OK. Use Ÿ¬/¬ź to select the following repeat mode; [None], [Single] or [All], and press OK. Copyright: Date: Genre: Duration: Next: Video Show details ( ) : Off Select Menu Play/Pause Back • The sort order: [Type], [Date] or [Name].
2. A'0 HO 2CIG /QPFC[ ,WPG #/ • Funai can not be held responsible if your USB flash memory is not supported, nor will Funai accept any liability for damage or loss of stored data. • A USB flash memory that required its own driver or the device with a special system such as fingerprint recognition are not supported. • Be sure to keep a backup copy of the original files on your device before you play them back on this unit.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Changing the TV Screen Display Mode You can select your favourite TV screen size. Press ASPECT repeatedly to switch the TV screen display mode. For 16:9 video signal [Auto] [4:3] [Full] [Zoom] [Cinema] [Expand] [Unscaled] Selects the TV screen display mode automatically. Displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edge of the TV screen.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ OTHER SETTINGS Colour Temperature Read this first Before adjust each setting, press MENU to display the menu. To exit the menu, press MENU. Press MENU and no input for 1 minute, then the menu disappears automatically. Picture Adjustment You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture menu. 1 Use Ÿ¬/¬ź to select [Picture], then press OK.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ PC Settings SRS TruSurround HD Before you begin: You must connect your PC to this unit and select [PC] at [Select Input]. Refer to “Switching the Input Mode” (p. 9). You can set to the sound modes for more spatial or surround sound reproduction. You can adjust the PC screen position, clock and phase. 1 2 2 Use Ÿ¬/¬ź to select [Picture], then press OK. Use Ÿ¬/¬ź to select [PC Settings], then press OK.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Audio Type Audio Channel You can adjust the audio type. 2 Use Ÿ¬/¬ź to select [Audio Type], and then select [-], [Hearing Impaired] or [Visually Impaired] using Ż¬/¬Ź. ATV You can select the audio mode. 2 Hearing Impaired: Provides audio service for hearing impaired. Visually Impaired: Use Ÿ¬/¬ź to select [Audio Channel], and then select [Stereo], [Mono], [Dual 1] or [Dual 2] using Ż¬/¬Ź.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Manual Scan (DTV) You can search DTV channel manually in your area. 3 Use Ÿ¬/¬ź to select [Manual Scan (DTV)], then press OK. 4 Use Ż¬/¬Ź to select [Channel Number], and then press OK to start scanning. Update Scan Search and register unreceived ATV and DTV channels. 3 Use Ÿ¬/¬ź to select [Update Scan], then press OK. Channel Skip When using skipped. / Use Ÿ¬/¬ź to select [Channel Skip], then press OK.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Setup Adjustment Subtitle Settings You can change other setting. Picture Menu Language You can change the subtitle settings used for TV programmes. 1 2 English Time Setup Sound Subtitle Teletext TV Use Ÿ¬/¬ź to select [Others], then press OK. Use Ÿ¬/¬ź to select [Subtitle], then press OK.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Teletext Common Interface (CI) You can change the teletext settings. 1 2 Use Ÿ¬/¬ź to select [Others], then press OK. Use Ÿ¬/¬ź to select [Teletext], then press OK. Picture Teletext Language Decoding Page Language Sound Presentation Level English WEST EUR Level 2.5 TV DTV This unit is equipped with a CI slot. You can enjoy additional services with this function, for example Pay TV.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Software Download Software download complies in specified countries only. You may not use this function depending on where you live. 1 2 Use Ÿ¬/¬ź to select [Others], then press OK. Use Ÿ¬/¬ź to select [Software], then press OK. Auto Update Search When you set to [On], this unit into standby mode detects and update a new version of software automatically. 3 Use Ÿ¬/¬ź to select [Auto Update Search], and then select [On] or [Off] then using Ż¬/¬Ź.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Change PIN Code Auto TV On You can set your own PIN Code. This unit will turn on detected when the power on signal is sent from your connected fun-Link device. 3 4 5 Use Ÿ¬/¬ź to select [Change PIN Code], then press OK. Use the Number buttons to enter the new 4-digit number. Use the Number buttons to enter the same 4-digit number again. Factory Reset You can restore this unit to factory settings.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ OTHER INFORMATIONS Specifications Model LED40-H9825M 40 inches LCD DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L Television system Terminals Antenna UHF/VHF 75 ohm Audio Input RCA jack (L/R) x 2 Composite Video Input RCA jack (shared terminal with Y of components) ×1 Component Video Input RCA jack (Y/Pb/Pr) ×3 HDMI 19pin x 3 HDMI Input PC Input D-Sub 15pin x 1 (RGB) / Mini jack Ø3.
2. A'0 HO 2CIG /QPFC[ ,WPG #/ Declaration of Conformity Servicing declare that the following product: LCD Television Model LED40-H9825M Trade Name: Funai is in compliance with the related regulations. Cabinet Cleaning This product complies with the requirement of the related directives. We: FUNAI ELECTRIC EUROPE Sp. z o.o. ul. Inůynierska 1, 67-100 Nowa Sól, Poland • Should your unit become inoperative, do not try to correct the problem by yourself.
2. DQQM 2CIG + /QPFC[ ,WPG #/ License Statement FreeType Portions of this software are copyright (C) 1996-2002 The Free Type Project (www.freetype.org). All rights reserved. ICU ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1995-2003 International Business Machines Corporation and others All rights reserved.
2. DQQM 2CIG /QPFC[ ,WPG #/ Web Site: http://www.funai.
