Operation Manual

EN
17
Audio Type
You can adjust the audio type.
2 Use Ÿ¬/¬ź to select [Audio Type], and then select
[-], [Hearing Impaired] or [Visually Impaired] using
Ż¬/¬Ź.
Hearing Impaired:
Provides audio service for hearing impaired.
Visually Impaired:
Provides additional audio description for visually impaired.
Audio Description
You can adjust audio output setting and volume for
[Visually Impaired].
2 After select [Visually Impaired], use Ÿ¬/¬ź to
select [Audio Description], and then select adjust
the setting using Ż¬/¬Ź.
TV Settings
You can select the country and audio language.
1 Use Ÿ¬/¬ź to select [TV], then press OK.
Country
You can set the country you want.
2 Use Ÿ¬/¬ź to select [Country], and then select the
country you want using Ż¬/¬Ź.
Main Audio Language / Sub Audio Language
You can select the main or sub audio language.
2 Use Ÿ¬/¬ź to select [Main Audio Language] or
[Sub Audio Language], and then select each
language you want using Ż¬/¬Ź.
Audio Channel
You can select the audio mode.
2 Use Ÿ¬/¬ź to select [Audio Channel], and then
select [Stereo], [Mono], [Dual 1] or [Dual 2] using
Ż¬/¬Ź.
Channel Settings
You can edit the channels.
1 Use Ÿ¬/¬ź to select [TV], then press OK.
2 Use Ÿ¬/¬ź to select [Channel], then press OK.
Auto Scan
You can scan the DTV and ATV channel in your area
automatically.
3 Use Ÿ¬/¬ź to select [Auto Scan] and then press
OK to start scanning.
Manual Scan (ATV)
You can search ATV channel manually in your area.
3 Use Ÿ¬/¬ź to select [Manual Scan (ATV)], then
press OK.
4 Use Ÿ¬/¬ź to select [Start Frequency (MHz)] for
section of the 3-digit frequency using the Number
buttons.
5 Use Ÿ¬/¬ź to select [Scan Up] or [Scan Down],
then press OK to start scanning greater than or less
than the adjusted frequency.
• After OK and appear the mixing level display, you can adjust it.
• Only MPEG sound is available for this function.
Country
France
English
English
Main Audio Language
Sub Audio Language
Channel
Picture
Sound
TV
Others
Parental
TV
Select Back
DTV
• While watching a programme, you can change the audio
language easily using AUDIO when it is available.
• When the scanning is completed, the lowest memorised digital
or analogue channel will be displayed.
• If you press MENU during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
• Please note that after tuning, the analogue channels will be
stored in the order that they are broadcast by your local
transmitter. This may not be in the same order in which you
would like them to be stored. If this is the case, you can change
the order according to your preference at “Channel Settings”
(p. 17).
ATV
Auto Scan
Manual Scan (ATV)
Manual Scan (DTV)
Update Scan
Channel Skip
Channel Sort
Channel Edit
Channel Decode
Fine Tune
Channel Select Search Back
Picture
Sound
TV
Others
Parental
2.A'0HO2CIG/QPFC[,WPG#/