Operation Manual
EN
6
PREPARATION FOR USE
Antenna Connection
1
Connect an RF cable to (aerial) Input jack at the
rear of this unit.
2 Plug this unit into an AC outlet.
3 Turns on the main power switch.
4 When the Standby / Power indicator on the front
panel lights red, then press to turn on the unit.
External Connection
HDMI Connection (HDMI 1 / HDMI 2 / HDMI 3 )
SCART Connection
Component / Composite video Connection
Audio Output connection
For digital broadcasting only
Read this first
• No supplied cables are used with these connection. Please
purchase the necessary cables at your local store.
• Illustration in the following connection are example. Read the
manual accompanying your device for more detail.
• Before you connect, be sure your antenna or other device is
connected properly before plugging in the AC power cord.
• If you like to connect an active DVB-T antenna, the antenna
must have its own power supply.
• It is not possible to power the antenna from the TV.
• This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i /
1080p video signals and 32 kHz / 44.1 kHz / 48 kHz only 2
channel audio signals (LPCM).
• You need to select “PCM” for the digital audio output of the
device you connect. Make sure the device outputs the digital
audio. Audio sometimes makes no sound if you select
“Bitstream”, etc.
Dear Customer,
By connecting an HDMI cable to your Funai LCD TV,
you have to use only a certified HDMI cable to guarantee
a sufficient immunity against parasitic frequency radiation.
A certified HDMI cable can be identified by the HDMI
logo on the cable or the cable package.
Your TV
RF cable
VHF/UHF
MIXER
VHFUHF
Your TV
Your device
HDMI cable
• This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i video
signals for component connection.
• Make sure the rest of Component Video jacks (Pb/Pr) are
unplugged completely when you plug the Composite Video
jack to Y / VIDEO terminal.
Your TV
Your device
SCART cable
Input Output
S-Video
Audio
(L/R)
CVBS RGB Video and Audio (L/R)
Yes Yes Yes Yes
Outputs the RF input
signal converted as CVBS
signal.
AUDIO
COMPONENT
/ VIDEO IN
L
R
Y
/ VIDEO
Pb
Pr
AUDIO
OUT
COMPONENT
VIDEO OUT
Your TV
Your device
audio
cable
component video cable
COMPONENT
/ VIDEO
AUDIO
OUT
VIDEO OUT
AUDIO
L
R
Y
/ VIDEO
Pb
Pr
Your TV
Your device
composite video
cable
audio cable
DTV
DIGITAL
AUDIO
COAXIAL IN
DIGITAL
AUDIO
OUT
COAXIAL
Your TV
Your device
digital audio
coaxial cable
2.A'0HO2CIG/QPFC[,WPG#/