Operation Manual

EN
8
OPERATIONS
Watching a TV Programme
To select a channel
Use / repeatedly to select your desired channel,
or use the Number buttons to enter a channel number,
then press OK for quicker access.
(e.g.) If you want to select the channel 24 without pressing
OK, press 2 first, then press 4 within 3 seconds.
To adjust the volume
Use +/– to adjust the audio volume.
Press to turn on or off the sound right away.
Channel List
You can easily find a channel you want.
1 Press OK while watching a programme.
2 Use Ÿ¬/¬ź to select the channel you want to
watch, then press OK.
3 Press BACK to exit.
Sleep Timer
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep time
period.
ECO Mode
When you set [ECO Mode] to [On], backlight brightness
will be reduced automatically which may save on power
consumption.
Press
ECO repeatedly to select [On] or [Off].
Sound Select
Press AUDIO to display currently selected audio language
with the number of available ones and press repeatedly to
cycle through them.
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available audio
mode.
(e.g.)
Read this first
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
• You can recover the original volume by pressing again or
+/–.
1
Radio Channel
2
Analogue Channel
• Use RED / GREEN to move to the previous or next page.
• You can edit the channel list at “Channel Settings” (p. 17).
Prev Page Next Page
Channel List
Channel List
• Each time you press SLEEP, the timer increases from
10 minutes up to 120 minutes.
• Press SLEEP repeatedly until [Off] appears to cancel the sleep
timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
On The illuminance sensor senses the brightness of
the environment and, darkens the backlight
automatically when the room gets dark.
Off The illuminance sensor is not effect, and the
backlight level gets back the value you adjusted.
• The display image can be found on the “TV Screen Information”
(p. 9).
Dolby Digital sound
Dolby Digital Plus sound
HE-AAC sound
no icon MPEG sound
Nicam Stereo Mono
Nicam Mono Mono
Stereo Mono
Dual1 Dual2
Mono
DTV
ATV
Nicam
Dual1
Nicam
Dual2
Mono
2.A'0HO2CIG/QPFC[,WPG#/