Operation Manual

EN
17
You can adjust the detailed picture settings according to your
personal preference.
1 Press MENU to display the menu.
2 Press K / L to select [PICTURE], then press OK.
3 Press K / L to select [Features], then press OK.
DNR (Digital Noise Reduction)
You can adjust to reduce the appearance of digitizing error
caused by the compression.
4 Press K / L to select [DNR], then press OK.
5 Press K / L to select the setting you want, then press
OK. ([High], [Mid], or [Low])
6 Press MENU to exit.
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
4 Press K / L to select [CTI], then press OK.
5 Press K / L to select the setting you want, then press
OK. ([High], [Mid], or [Low])
6 Press MENU to exit.
Adaptive Luma Control
You can adjust changes in the luminance of the picture.
4 Press K / L to select [Adaptive Luma Control].
5 Press K / L to select the setting you want, then press
OK. ([On] or [Off])
6 Press MENU to exit.
Backlight
You can adjust backlight brightness.
4 Press K / L to select [Backlight], then press OK.
5 Press 0 / 1 to adjust, then press OK.
6 Press MENU to exit.
Advanced Picture Adjustment
DTV ATV
5
Features
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
DNR
CTI
Adaptive Luma Control
Backlight
Features
Mid
On
Mid
0 (cursor) 1 (cursor)
dim brighten
Note:
If you adjust the brightness except 1, [ECO Mode] will be set to
[Off].
OK
5
Backlight
Adjust OK