LCD Television LT7-M22BB / LT7-M22WB LT7-M19BB / LT7-M19WB Owner’s Manual STAND BY VOL. MENU PROG.
PRECAUTIONS CAUTION 1) Do not attempt to open the cabinet. There are no user serviceable parts inside. Refer all servicing to qualified service personnel. 2) Slots and openings in the cabinet and the sides or bottom are provided for ventilation. To ensure reliable operation and to protect the unit from overheating, these openings must not be blocked or covered. Avoid installation in enclosed spaces such as bookcases unless proper ventilation is provided.
Off TABLE OF CONTENTS PRECAUTIONS .................................................................................................................................................2 THINGS TO DO FOR THE FIRST TIME ...........................................................................................................4 OPERATING CONTROLS AND FUNCTIONS ..................................................................................................5 PREPARATION FOR USE ....................................
THINGS TO DO FOR THE FIRST TIME ATTACHING THE STAND You need to attach the stand to the unit to display upright. Make sure the front and rear of the stand match the proper direction. 1) Place the unit face down onto 2) Hang the hook under the the soft stuff such as a cloth on a table. Be careful not to damage the unit screen. bottom of the main unit to the stand’s hole (shown arrow A), then slide down the stand in the direction of the screen (shown arrow B).
OPERATING CONTROLS AND FUNCTIONS All operations described are based on the use of the remote control. Some operations can be carried out using the buttons on the control panel. CONTROL PANEL REMOTE CONTROL 14 2 1 7 ASPECT 5 8 STAND BY VOL. MENU POWER PROG. Q STAND BY VOL. 4 1. MENU 5 3 6 25 1 Press to display the teletext information. INPUT Press to change the available subtitle languages. 14. SLEEP Press to set the sleep timer. Press to hide the teletext. 15.
REAR PANEL PC-IN RGB 33 26 HDMI-IN HDMI 1 34 35 COMPONENT Y Pb Pr L R AUDIO 35 27 29 28 31 * PC-IN RGB HDMI-IN HDMI 1 PC-IN AUDIO VIDEO S-VIDEO VIDEO L R AUDIO SCART COMPONENT Y Pb Pr L R 32 AUDIO 36 PC-IN AUDIO VIDEO 30 37 S-VIDEO VIDEO L R AUDIO SCART PC-IN RGB 33 HDMI-IN HDMI 1 34 35 26 29 30 27 31 32 28 35 Y Pb L Pr PC-IN RGB R AUDIO HDMI-IN HDMI 1 HEAD PHONE VIDEO VIDEO L Pb L Pr R AUDIO HEAD
26. COMPONENT (Y/Pb/Pr) / AUDIO (L/R) input jack Connect an RCA component video and an RCA audio cable (not supplied) to the component video and audio output jack of an external device. 27. S-VIDEO input jack Connect an S-Video cable (not supplied) to the S-Video output jack of an external device. 28. VIDEO input jack Connect an RCA video cable (not supplied) to the video output jack of an external device. 29.
PREPARATION FOR USE Installing the Batteries Dear Customer, By connecting an HDMI cable to your Funai LCD TV, you have to use only a certified HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation. A certified HDMI cable can be identified by the HDMI logo on the cable or the cable package. 1) Open the battery compartment cover. 2) Insert “R6/AA” penlight batteries into battery compartment in the direction as indicated by the polarity (+/–) markings.
[COMPONENT CONNECTION] [S-VIDEO CONNECTION] RCA component video connection offers better picture quality. 1) Connect the component video output jack (Y, Pb, Pr) of your video device and the COMPONENT video (Y, Pb, Pr) input jack of this unit. Use an RCA component video cable (not supplied). S-Video connection offers good picture quality. 1) Connect the S-Video output jack of your video device and the S-VIDEO input jack of this unit. Use an S-Video cable (not supplied).
[VIDEO CONNECTION] RCA video connection offers standard picture quality. 1) Connect the video output jack of your video device and the VIDEO input jack of this unit. Use an RCA video cable (not supplied). 2) Connect the audio output jack of your video device and the AUDIO (L/R) input jack of this unit. Use an RCA audio cable (not supplied).
[PC CONNECTION] Precautions for the connection to other devices: If you connect this unit and your PC, you can use this unit as a computer monitor. 1) Connect the monitor jack of your PC and the PC-IN (RGB) jack of this unit. Use a VGA cable with ferrite core (not supplied). • Please use the VGA cable that has a ferrite core. The following signals can be displayed: Format 2) Connect the audio line out jack of your PC and the PC-IN (AUDIO) jack of this unit. Use a mini-plug audio cable (not supplied).
SETUP FOR USE Initial Setting DTV ATV You need to set the followings to use the unit appropriately for the first time you turn on the unit. 1) Press [Q (standby-on)] to turn on the unit. • “Initial Setup” language menu will appear. Note: The settings may be limited by the location you purchased. 2) Press [K / L] repeatedly to select the menu language you want, then press [OK].
OPERATIONS Watching a TV Programme DTV Switching the Input Mode ATV DTV To select a channel Press [ / ATV You can switch the input mode to TV mode or external input mode. ] repeatedly to select your desired channel. 1) Press [INPUT]. • “Select Input” menu will appear. or Press [the Number buttons] to enter a channel number then [OK] for quicker access. • If you want to select the channel 24 without pressing [OK], press [2] first, then press [4] within 3 seconds.
Sound Select TV Screen Information DTV DTV ATV You can see the broadcasting information. 1) Press [SOUND] to display the currently selected audio language and the number of available languages. 1) Press [I (information)]. • Fewer information menu will appear. 2) Press [I (information)] again to display more informations. 2) Press [SOUND] repeatedly to cycle through the available audio languages. ATV 1) Press [SOUND] to display the currently selected audio mode.
EPG (Electronic Programme Guide) DTV You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programmes. 1) Press [GUIDE]. • EPG will appear.
Changing the TV Screen Display Mode For HD (High Definition) video signal DTV ATV You can select your favourite TV screen size. “Full” Press [ASPECT] repeatedly to switch the TV screen display mode. “Auto” For SD (Standard Definition) video signal “Zoom” “Expand” “Sidebar” “Auto” “Cinema” “14:9” “Full” “Auto” Selects the TV screen display mode automatically. This is the default. “Wide” “Full” Displays a 16:9 picture at its original size.
OTHER SETTINGS Picture Adjustment DTV “Colour Temperature” 3) Press [K / L] to select “Colour Temperature”. ATV You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture menu. 4) Press [s / B] to select the setting (“Cool, Normal, Warm”) you want. 1) Press [MENU] to display the menu. Picture 2) Press [K / L] to select “Picture”, then press [OK]. Sound TV “Picture Mode” 3) Press [K / L] to select “Picture Mode”.
Advanced Picture Adjustment DTV “Flesh Tone” You can set to activate the flesh colours or not. ATV You can adjust the detailed picture settings according to your personal preference. 4) Press [K / L] to select “Flesh Tone”. 1) Press [MENU] to display the menu. 5) Press [s / B] to select the setting (“On, Off ”) you want. 2) Press [K / L] to select “Picture”, then press [OK]. “Adaptive Luma Control” You can adjust changes in the luminance of the picture.
PC Settings Sound Adjustment You can adjust the PC screen position, clock and phase. Make sure your PC is connected. DTV ATV You can adjust the sound settings according to your personal preferences. These settings are automatically stored after exiting the sound menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “Picture”, then press [OK]. 1) Press [MENU] to display the menu. 3) Press [K / L] to select “PC Settings”, then press [OK].
Country Setting “Auto Volume Control” You can set to keep a constant loudness differential between the TV commercials and the programs. Note: You may not select the country depending on the location you purchased. DTV 3) Press [K / L] to select “Auto Volume Control”. ATV 4) Press [s / B] to select the setting (“On, Off ”) you want. You can select the channels according to the country you select. “Assistive Services” 1) Press [MENU] to display the menu.
Audio Language Selection DTV Auto Scan DTV ATV ATV You can select the main language. You can scan the channels receivable in your area automatically. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 4) Press [K / L] to select “Auto Scan”, then press [OK]. • Scanning will start automatically.
Analogue Manual Scan Update Scan ATV DTV ATV You can adjust an analogue channel individually. You can scan the updated channels automatically. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 4) Press [K / L] to select “Manual Scan (Analogue)”, then press [OK].
Channel Skip DTV Channel Sort ATV When using [ DTV / ], the channel you selected will be skipped. ATV You can change the channel order. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 4) Press [K / L] to select “Channel Skip”, then press [OK].
Channel Edit DTV “Frequency” ATV You can edit channel information. ATV 1) Press [MENU] to display the menu. 7) Press [the Number buttons] to enter a frequency you want, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. “Colour System, Sound System” 4) Press [K / L] to select “Channel Edit”, then press [OK]. • “Channel List” will appear. Picture Sound TV Setup 7) Press [s / B] to select the setting you want.
Fine Tune Time Zone ATV DTV ATV You can set the time zone according to the resident area. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK]. 2) Press [K / L] to select “Setup”, then press [OK]. 4) Press [K / L] to select “Fine Tune”, then press [OK]. • “Channel List” will appear. 3) Press [K / L] to select “Time Setup”, then press [OK].
Subtitle Settings DTV Teletext ATV DTV ATV You can change the teletext settings. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “Setup”, then press [OK]. 2) Press [K / L] to select “Setup”, then press [OK]. 3) Press [K / L] to select “Subtitle”, then press [OK]. • “Subtitle” menu will appear.
C.I. (Common Interface) Parental Setting DTV DTV This unit is equipped with a C.I. slot. You can enjoy additional services with this function, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed. ATV You can set the maturity rating, lock the channel, or set the password. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “Parental”, then press [OK]. 1) Turn off the unit and unplug from an AC outlet.
Software Download “Maturity Rating” You can set the parental rating to avoid watching an inappropriate programme for your children. DTV You can update the current software when this unit detects a new version of software. 4) Press [K / L] to select “Maturity Rating”, then press [OK]. 1) When this unit receives software updates automatically, the following message will appear. 5) Press [K / L] to select “Parental Rating”. 6) Press [s / B] to select the age restriction.
MAINTENANCE Panel Cleaning Cabinet Cleaning • If the LCD panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning the panel, disconnect the power cord. • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
SPECIFICATIONS General Specifications Other Specifications Television system: Remote control: Power requirements: Terminals S-Video input: Video input: Audio input: PC input: AUDIO/VIDEO: Component Video input: HDMI input: Headphone: Stereo Sound System 2 speakers Sound output: PAL B/G TV standard PAL D/K TV standard SECAM L TV standard SECAM L' TV standard SECAM B/G TV standard SECAM D/K TV standard Digital encoded infrared light system AC 220-240 V~, 50 Hz Power consumption:
DECLARATION OF CONFORMITY This product complies with the requirement of the directives EMC-Directive: Low Voltage Directive: EN55013: 2001+A1: 2003+A2: 2006 EN55020: 2007 EN61000-3-2: 2006 Class A EN61000-3-3: 1995+A1: 2001+A2: 2005 EN60065: 2002+A1: 2006 EN55022: 2006 Class B EN55024: 1998+A1: 2001+A2: 2003 2004 / 108 / EC 2006 / 95 / EC We: Funai Electric (Polska) Sp. z o.o. ul.
Web Site: http://www.funai.
