LT840-M32 LT850-M32 LT850-M26 LCD-TV-Gerät Bedienungsanleitung Deutsch Télévision LCD Manuel du propriétaire Français Televisión de LCD Manual del propietario Español Televisione LCD Manuale del proprietario Italiano Televisão LCD Manual do proprietário Português Lcd-televisie Gebruikershandleiding Nederlands LCD Τηλεόραση Εγχειρίδιο οδηγιών Ελληνικά LCD-TV Användarhandbok Svenska LCD Television Owner’s manual English Telewizor LCD Instrukcja obsługi Polski
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers are located at the rear of the unit. Model number:_________________ Serial number:_________________ PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Contents PRECAUTIONS ...................................................... 2 INTRODUCTION Features..................................................................................4 Supplied Accessories ......................................................4 Trademark Information .................................................4 Symbols Used in this Manual .....................................4 Attaching the Base ...........................................................5 Tilt Stand......................
Off INTRODUCTION A Note about Recycling This unit's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. This product consists of materials which can be recycled and reused if disassembled by a specialised company. Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste.
Attaching the Base Tilt Stand You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. 1 2 3 Spread a thick and soft cloth over a table as shown. Place the main unit face down onto it. Make sure not to damage the screen. Align the 2 base hooks with the hooks under the bottom of the main unit (shown by arrow A), then slide the base in the direction as shown B by arrow B until it stops and the 4 mounting holes are aligned.
1. Control Panel 2. 3. 32” 32” 29 30 4. 5. 6. 9 8 24 1 26” STAND BY VOL. MENU PROG. 9 8 24 7. POWER Q 29 30 1 8. Remote Control 9. 1 2 17 18 19 3 10. 4 20 5 21 11. 12. 6 7 8 9 22 23 24 10 11 14. 12 15. 16. 13 14 15 16 13. 25 26 27 28 17. 18. 19. 20. 6 EN Q (power) (p. 8) Press to turn on or off (standby) the unit. SLEEP (p. 12) Press to set the sleep timer. Press to hide the teletext. Number buttons (p. 12) Press to select the desired channel in TV mode.
21. ECO (p. 13) Press to set the picture brightness for power saving. 22. I (information) (p. 13) Press to display the TV screen information. 23. DTV / RADIO Press to select DTV or radio mode. 24. PROG. K / L (control panel) / / (remote control) Press to select memorised channel or other modes. PROG. K / L (control panel) (p. 12) Same function as K / L (cursor) (remote control) on the menu. 25. (subtitle) (p. 22) Press to change the available subtitle languages. 26. 27. 28. 29. 30. (subpage) (p.
PREPARATION FOR USE No supplied cables are used with these connections: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. HDMI connection Antenna Connection UHF External Connection VHF Your TV HDMI connection offers the highest picture quality.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. Component connection Composite video connection Component video connection offers better picture quality. Composite video connection offers standard picture quality. 1 1 2 Connect the component video output jacks of your video device and the Component video Input jacks of this unit. Use component video cables.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. PC connection If you connect this unit and your PC, you can use this unit as a computer monitor. Precautions for the connection to other devices: Please use the VGA cable that has a ferrite core. 1 2 Connect the monitor jack of your PC and the PC Input jack of this unit. Use a VGA cable with ferrite core. Connect the audio line out jack of your PC and the Audio Input jack for PC of this unit.
SETUP FOR USE 5 Press OK to start scanning. Note: • If you press MENU, you can skip to step 6. • If you press MENU during DTV channel scanning, this operation will be stopped and ATV channel scanning will start automatically. • If you press MENU during ATV channel scanning, this operation will be stopped and the lowest memorised channel will be displayed. • When no channel is registered, retry confirmation menu will appear.
OPERATIONS Sleep Timer Watching a TV Programme DTV DTV ATV To select a channel Press PROG. K / L (control panel) or / (remote control) repeatedly to select your desired channel. or Press the Number buttons to enter a channel number then OK for quicker access. (e.g.) If you want to select the channel 24 without pressing OK, press 2 first, then press 4 within 3 seconds. 1 2 Press SLEEP. Press SLEEP repeatedly to change the sleep time period.
ECO Mode When you set [ECO Mode] to [On], backlight brightness will be reduced automatically which may save on power consumption. Press ECO OK. On Off repeatedly to select [On] or [Off], then press : The backlight is the lowest level. : You can adjust the backlight level at “Advanced Picture Adjustment” (p. 17). 4. 5. (if available) 6. 3 lines, press K / L to scroll. Press SOUND to display the currently selected audio language and the number of available languages. 7. 8. 9. 10.
EPG (Electronic Programme Guide) DTV DTV You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programmes. 1 2 Changing the TV Screen Display Mode Press GUIDE. Press K / L to select a channel, then press 1 (cursor). ATV You can select your favourite TV screen size. Press ASPECT mode. repeatedly to switch the TV screen display For 16:9 video signal 4:3 Thu, 11/02/2010 11:01 Programme Guide Auto Thu, 11/02/2010 DTV 18.
For 4:3 video signal For PC input signal 14:9 4:3 Normal Full Auto Wide Full Cinema Zoom Dot by Dot Normal Displays a proportionally stretched picture. Mainly sidebars appear on both edges of the TV screen. Full Displays a picture that is stretched out of proportion horizontally to fill the TV screen. Auto Selects the TV screen display mode automatically. This is the default. Dot by Dot Displays a picture at its original size. 4:3 Displays a 4:3 picture at its original size.
OTHER SETTINGS Brightness / Contrast / Colour / Hue / Sharpness 3 Picture Adjustment DTV Note: Press K / L to change the items. ATV You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture menu. 1 2 Press K / L to select the item you want, then press OK. 4 Press 0 / 1 to adjust, then press OK. Note: If you adjust the settings in other than [Personal] mode, [Picture Mode] will be changed to [Personal].
Advanced Picture Adjustment DTV You can adjust changes in the luminance of the picture. ATV You can adjust the detailed picture settings according to your personal preference. 1 2 3 Adaptive Luma Control 4 5 Press MENU to display the menu. Press K / L to select [Adaptive Luma Control]. Press K / L to select the setting you want, then press OK. ([On] or [Off]) Press K / L to select [PICTURE], then press OK. 6 Press K / L to select [Features], then press OK. Backlight Press MENU to exit.
Balance Sound Adjustment DTV You can set the balance of the left and right speakers. ATV You can adjust the sound settings according to your personal preferences. 1 2 3 4 Press K / L to select [Balance], then press OK. Press 0 / 1 to adjust, then press OK. Press MENU to display the menu. 0 (cursor) Press K / L to select [SOUND], then press OK.
Channel Delete Channel Settings DTV The channel you selected will be deleted from the channel list. ATV You can edit the channels. 1 2 3 4 5 Press MENU to display the menu. Press K / L to select [CHANNEL], then press OK. Press K / L to select [Channel List], then press OK. Press K / L to select the channel you want to edit, then press OK. Channel List -DTV- SOUND CHANNEL OTHERS 18. ETV Skip 19. Euro CH Delete 20. Drama Now! Lock 21. WNS Move Up 22.
Auto Scan DTV ATV You can scan the channels receivable in your area automatically. 1 2 3 4 Press MENU to display the menu. Press K / L to select [CHANNEL], then press OK. Press K / L to select [Auto Scan], then press OK. • Auto Scan Confirmation message will appear. ATV 4 5 6 7 8 Press K / L to select [Start], then press OK. • Channel scanning will start. Press K / L to select [Channel], then press OK. Press K / L or the Number buttons to select the channel number you want, then press OK.
Change PIN Code Lock Settings DTV You can set your own PIN code. ATV You can set the parental rating and change the PIN code. 5 1 2 3 4 6 Press MENU to display the menu. Press K / L to select [OTHERS], then press OK. Press K / L to select [Lock Settings], then press OK. 7 Press the Number buttons to enter the 4-digit PIN Code you set. Press the Number buttons to enter the same 4-digit number again.
Main Audio Language / Sub Audio Language You can select the main or sub audio language. 5 Press K / L to select the item you want, then press OK. 6 Press K / L to select the language you want. 7 Press MENU to exit. Note: While watching a programme, you can change the audio language easily using SOUND when it is available. Audio Type You can adjust the audio type. 5 6 Subtitle Settings DTV You can change the subtitle settings used for TV programmes.
Presentation Level Teletext You can adjust the teletext presentation level. Level 2.5 offers more colours and better graphics than Level 1.5. DTV You can change the teletext settings. Before you begin: You must select [DTV] at “Switching the Input Mode” (p. 12). 1 2 3 4 5 6 Press MENU to display the menu. Press K / L to select [OTHERS], then press OK. Press K / L to select [DTV Settings], then press OK. Press K / L to select [Teletext], then press OK.
C.I. (Common Interface) DTV This unit is equipped with a C.I. slot. You can enjoy additional services with this function, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed. 1 2 Turn off the unit and unplug from an AC outlet. Insert the CI module straight to the C.I. slot of this unit. • Some CI modules may be a two-piece design consisting of a card reader with the viewing card.
Auto TV On FUN-LINK This function allows you to operate the linked functions between our brand devices with a FUN-LINK feature and this unit connecting through an HDMI cable. Note: 1 2 3 The set with FUN-LINK will interoperate without any problems with other FUNAI devices which comply with FUN-LINK. This unit will turn on detected when the power on signal is sent from your connected FUN-LINK device. 4 5 Press K / L to select [Auto TV On], then press OK.
Auto Shut Off Country Setting DTV ATV You can select the channels according to the country you select. 1 2 3 4 5 Press MENU to display the menu. Press K / L to select [OTHERS], then press OK. Press K / L to select [Country], then press OK. Press K / L to select the country you want, then press OK. Press MENU to exit. 1 2 3 Press MENU to display the menu. Press K / L to select [OTHERS], then press OK. Press K / L to select [Time Setup], then press OK.
Factory Reset You can restore this unit to factory settings. 1 2 3 4 Press MENU to display the menu. Press K / L to select [OTHERS], then press OK. Press K / L to select [Factory Reset], then press OK. Press K / L to select [Reset], then press OK. • All the settings are restored to the default even memorized channels, picture settings, and sound settings. Menu Language Selection DTV ATV You can select the menu language. 1 2 3 4 Press MENU to display the menu.
TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money. Problem Possible Remedy • Is unit plugged in? Remote Control Doesn’t Work • Power at outlet? • Check batteries in remote control. • If outside antenna is being used, check for broken wire. Bars On TV Screen • Check for local interference.
SPECIFICATIONS Model LCD Television system Terminals Antenna Audio Input Composite video Input S-Video Input Component video Input HDMI Input PC Input Scart Headphone Speaker USB input Remote control Power requirements Power consumption without base Dimensions: H x W x D (mm) with base Weight without base with base LT840-M32 LT850-M32 LT850-M26 31.
Web Site: http://www.funai.
