Magnavox DVD/CD Player Owner's Manual

DVD FUNCTIONS
EN
19
5
TV ASPECT
4:3
LETTER BOX
4:3
PAN & SCAN
16:9
WIDE
16:9
SQUEEZE
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
OK
OK
or
STILL MODE: (Default: AUTO)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
STILL MODE
AUTO
FIELD
FRAME
Select the
desired
setting.
6 To exit the menu4
OK
OK
OK
OK
OK
OK
or
or
or
Select the
desired
setting.
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
B
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO1
FORMAT RGB
RGB RANGE NORMAL
OK
Select the desired item.
DISPLAY menu
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
Note:
TV ASPECT:
Select “4:3 LETTER BOX”, so that
black bars may appear on the
top and bottom of the screen.
Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
Select “16:9 SQUEEZE” when the
TV screen is too large horizontally
at “16:9 WIDE” setting and when
it is possible to adjust the screen
size using the TV’s controls.
STILL MODE:
• Select “AUTO” usually.
If you select “AUTO”, it automat-
ically selects the best resolution
setting (“FRAME” or “FIELD”)
based on the data characteris-
tics of the pictures. (default)
If you select “FIELD”, the picture
in the still mode will be stabilized.
If you select “FRAME”, the
picture in the still mode will be
highly defined.
An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
Some pictures may be blurred
at the “AUTO” setting in the still
mode due to their data charac-
teristics.
HDMI MODE:
480p: Video output from the
HDMI OUT jack at 480p
720p: Video output from the
HDMI OUT jack at 720p
1080i: Video output from the
HDMI OUT jack at 1080i
1080p: Video output from the
HDMI OUT jack at 1080p
When the HDMI/DVI video can
be output, the setting change
can be done.
If the TV is not compatible with
newly selected HDMI output
mode, press and hold [PLAY B]
on the front of the unit for more
than 5 seconds to reset the
setting to default.
PROGRESSIVE MODE:
You can select a mode below
for the progressive scan output.
AUTO1: mode suitable for
images on the film
material.
AUTO2: mode for images on the
material of 30-frame
film.
VIDEO: mode for video
material.
FORMAT:
Select an HDMI output mode
between “YCbCr” and “RGB”.
When the connected device
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
This setting is effective only
when you use the HDMI con-
nection.
RGB RANGE:
Select a HDMI picture mode
between “NORMAL” and
“ENHANCED”.
Select “ENHANCED” if the black-
white contrast is not clear.
This setting is effective only for
HDMI RGB output.
PROGRESSIVE MODE: (Default: AUTO1)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
PROGRESSIVE MODE
AUTO1
AUTO2
VIDEO
FORMAT: (Default: RGB)
See note on the right.
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
YCbCr
NORMAL
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
RGB RANGE: (Default: NORMAL)
See note on the right.
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
RGB
ENHANCED
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
Select the
desired
setting.
SETUP
page 20
or
OK
OK
HDMI MODE:
QUICK
(Default: 480p)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE OFF
HDMI MODE 480p
PROGRESSIVE MODE
AUTO 1
FORMAT RGB
RGB RANGE NORMAL
HDMI MODE
480p
780p
1080i
1080p
Select the
desired
setting.
E6E75UD_DP170MW8B_EN_v1.indd 19E6E75UD_DP170MW8B_EN_v1.indd 19 2009/02/04 10:45:472009/02/04 10:45:47