OWNER’S MANUAL COLOR TV/DVD MWC13D5 A (13 inch) SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner’s Manual Owner's Manual INSTRUCCIONES EN ESPAÑOL INCLUIDAS. NE239UD 2 AA Batteries 1EMN20257 If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-605-8610. Or visit our WEB SITE at http://www.funai-corp.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 12.
PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
LOCATION SYMBOLS USED IN THIS MANUAL For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . .5 C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES TV Mode DVD Mode • 181 channel capability PLL frequency synthesiz• • er tuner with direct station call (A converter may be necessary to view scrambled cable channels.) Infrared remote control Trilingual on screen menu display selectable in English, Spanish or French ¡Dolby Digital sound This unit can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.
OPERATING CONTROLS AND FUNCTIONS [Fig. 1] FRONT PANEL L –AUDIO– R VIDEO STANDBY-ON L VOLUME K L CHANNEL K C STOP H PREV B PLAY NEXT G F PAUSE A OPEN/CLOSE HEADPHONE E – SEARCH – D 1 2 3 REMOTE CONTROL 4 5 6 7. Remote Sensor Window 8. C STOP Button [page 21] Stops operation of the disc. [Fig. 2] 9. H PREV Button [page 22] Plays back from the beginning of the current chapter or track.
REAR VIEW [Fig. 3] COAXIAL 37 17. SLEEP Button [page 16] Hit to display the sleep timer and start the function. The shut off time can be determined by the number of times you hit this button. (0, 30, 60, 90 or 120 minutes) 18. h Button [page 21] Hit to fast reverse the Disc. Hit [PAUSE F], then hit this button to begin slow motion playback. Hit this button repeatedly to change the reverse speed of slow motion. g Button [page 21] Hit to fast forward the Disc.
PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or Cable Box OUT (Not supplied) IN VHF/UHF Antenna (Not supplied) From Cable System or Satellite Dish VHF Antenna (Not supplied) UHF Antenna (Not supplied) From Cable System COAXIAL or 75-ohm Coaxial Cable (Not supplied) VHF/UHF or Combiner (Not supplied) ANT. ANT. or Flat twin-lead cable [Fig.
CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the audio/video input jacks on the front of the unit. Connect the audio/video output jacks of another source to the AUX AUDIO L/R and VIDEO jacks of this unit. Then hit [SELECT] until "AUX" appears on the screen. NOTE: • When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this unit.
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables (commercially available) for the audio connections.
TV SECTION SET UP FOR USE CHANNEL SET UP SELECTING THE LANGUAGE Make sure ... • The unit must be turned on. TV 1 Plug in the unit power cord Plug the unit power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, hit [STANDBY-ON] without unplugging the power cord. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area.
DELETING (OR ADDING) CHANNEL(S) TV The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) 1 Select “CHANNEL SET UP” Hit [SETUP] on the remote control. K / L] to point to “CHANPress [K NEL SET UP”. Then hit [ENTER]. 2 Select “ADD/DELETE CH” K / L] to point to Press [K “ADD/DELETE CH”. Hit [ENTER].
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV 1 TV Turn on the unit Hit [STANDBY-ON] to turn on the unit. 2 Select the channel number Press [CH. K / L] to select your desired channel number or press the Number buttons. Notes for using the Number buttons on the remote control: • You must precede single-digit channel numbers with a zero (Example: 02 ... 09). • When selecting cable channels which are higher than 99, hit [+100] first, then press the last two digits.
SLEEP TIMER TV The Sleep Timer function enables you to shut off the power without hitting [STANDBY-ON] after a desired time period. 1 Make sure ... • unit power must be turned on. Set “SLEEP TIMER” Hit [SLEEP] on the remote control. You may change the sleep time with hitting [SLEEP] repeatedly. The timer is set up to 120 minutes, 30 minutes each time [SLEEP] is pressed. NOTE: If the unit displays a black box on the TV screen, this means that the unit is set to the TEXT mode.
V-CHIP SET UP TV V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen. To block ratings, follow the steps below.
B C MPAA RATING SET UP Follow steps 1 to 3 in the “V-CHIP SET UP” section on page 17. 4 Selection G PG PG-13 R NC-17 X 4 G PG PG–13 B R NC–17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] Rating Category Explanations General Audience Parental Guidance suggested.
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Playable discs DVD-Video Mark (logo) Recorded signals Disc size Digital video (MPEG2) 12 cm or 8cm Digital audio 12 cm or 8cm Region code Disc types or * 1,2,3,10 DVD-RW DVD-R - Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 * 1,3,4,5,6 8,9 DVD+RW DVD+R - * 1,3,4,5,7,8,9 Audio CD * 3,5 CD-RW CD-R - Audio CD Example Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 * 3,4,5,8,9 is a trademark of DV
PLAYING A DISC BASIC PLAYBACK DVD-V GENERAL FEATURES CD DVD-V Getting started ¡Turn on the power of amplifier and any other com- ponents, if necessary. 1 Hit [STANDBY-ON]. ¡The power will turn on. 2 Hit [OPEN/CLOSE A] to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD may contain menus to navigate the disc and access special features.
FAST FORWARD / FAST REVERSE RESUME DVD-V CD DVD-V 1 During playback, hit [STOP C]. CD 1 During playback, press [g] or ¡Resume message will appear on the TV screen. [h ]. 2 Hit [PLAY B], playback will resume from the ¡“ g 1” or “h 1” appears on the screen. point at which playback was stopped. 2 To select another speed, repeat step 2 until ¡To cancel resume, hit [STOP C] twice. ¡If unit is turned off, resume function will be can- ¡For DVDs, fast forward/reverse search speed is dif- celled.
SEARCH FUNCTION TRACK SEARCH TIME SEARCH CD DVD-V There are three ways to begin playback on an Audio CD at a specific track. CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons on the remote control 2 Within 30 seconds, enter a desired disc 1 Press the Number buttons to enter the time using the Number buttons. desired track number. ¡Playback will start at the selected track.
SPECIAL PLAYBACK FUNCTION REPEAT PROGRAM CD REPEAT is available only during playback. REPEAT TITLE / CHAPTER You may determine the order in which tracks will play. DVD-V To activate the repeat function, hit [REPEAT] during playback. ¡The repeat mode changes as described below every time you hit the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) NOTES: ¡Repeat Title/Chapter is not available with some scenes.
CHANGING THE SETTINGS SUBTITLE LANGUAGE AUDIO LANGUAGE DVD-V DVD-V The unit allows you to select a language for subtitles during DVD disc (if available) playback. The unit allows you to select a language during DVD disc (if multi languages are available) playback. 1 Hit [SUBTITLE] during playback. ¡The subtitle language will be displayed on the display bar at the top of the screen. 1 Hit [AUDIO] during playback. 1.ENG/6 1.ENG Dolby D 3/2.
CAMERA ANGLE VIRTUAL SURROUND DVD-V Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. DVD-V CD You can enjoy surround-sound effect over two speakers on this unit. 1 Press [V.SURR] once or [MODE] twice (CD: once) during playback. 1 Hit [ANGLE] during playback. ¡If the “ANGLE ICON” OFF 1/8 setting is “OFF” in the “DISPLAY” menu, the ( ) icon will not appear. (Refer to page 28.
THE ON-SCREEN INFORMATION DVD-V CD You can check the information about the current disc by hitting [DISPLAY]. For DVD-Vs For Audio CDs 1 Hit [DISPLAY] during playback to show current Chapter. ¡The elapsed and remaining 9/49 1 Hit [DISPLAY] during playback to show the current Track. ¡The elapsed and remaining playing time of the cur- 0:00:00 -0:03:30 playing time of the current chapter will be displayed. rent track will be displayed. 2 Hit [DISPLAY] again to show current Title.
CHANGING THE DVD SETUP ITEMS Language CUSTOM MENU DVD-V You can change the DVD player’s settings. 1 Hit [SETUP] twice in STOP mode so that the DVD SETUP menu appears. ¡Hit [L] to select “CUSTOM” SETUP then hit [ENTER]. QUICK CUSTOM INITIALIZE NOTE: ¡If the menu does not appear, hit [PLAY B] first, then hit [STOP C]. Make sure the disc is in STOP mode, then slowly hit [SETUP] twice. 2 Select the desired item. ¡Press [K / L] to select the desired item then hit [ENTER] to confirm.
B C DISPLAY SETTING You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Follow steps 1 to 2 in the “CUSTOM MENU” section on page 27. 3 Press [K / L] to select the below items then AUDIO SETTINGS Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD discs. Follow steps 1 to 2 in the “CUSTOM MENU” section on page 27. 3 Press [K / L] to select the below items then hit [ENTER].
D PARENTAL CONTROL IF YOU FORGET THE PASSWORD Parental Control limits the disc viewing that exceed your setting (with a password or playback will stop). This feature allows you to prevent discs with alternative scenes from being played by your children. 1 Hit the Number buttons [4], [7], [3], [7] at step 3 . Then enter your new password. ¡Password will be cleared and parental level will be set to “ALL”. PARENTAL LEVEL 2 Proceed with steps 4 to 6 again.
TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, consulting the following checklist. Problem No power No operation by infrared remote control Corrective Action • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor.
Closed Caption Problem The unit is showing captions that are misspelled. Possible Remedy • You are watching a live broadcast and spelling errors made by the • closed captioning production company may pass through uncorrected. • A prerecorded program will not show any misspelled words because • of the normal time available for editing the captions.
MAINTENANCE CABINET CLEANING SERVICING • Wipe the front panel and other exterior surfaces of • Should your unit become inoperative, do not try to • the unit with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. correct the problem by yourself. There are no userserviceable parts inside.
SPECIFICATIONS GENERAL SPECIFICATIONS TV CRT : 13 inch in-line gun, 90˚ deflection tube Television system: NTSC-M TV Standard Closed caption system: §15.
INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 34 PANEL FRONTAL DE LA UNIDAD . . . . . . . . . . . . . . . 34 MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 34 VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 35 ■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 35 CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 35 CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . .
20. Botón SETUP Presione para entrar o salir del menú de configuración de televisor o DVD. 21. Botón TITLE Visualiza el menú de títulos. 22. Botón CLEAR Repone un ajuste. 23. Botón DISPLAY Modo del televisor: Presione para visualizar el número del canal en la pantalla. Si lo presiona de nuevo, el número del canal desaparecerá. Modo de DVD: Visualiza el estado actual en la pantalla del televisor con fines de comprobación. 24. Botón SEARCH MODE Presione para localizar un punto deseado. 25.
NOTA: • Cuando conecte una videograbadora monofónica (otra fuente) a esta unidad, conecte la toma de salida de audio de la videograbadora monofónica (otra fuente) a la toma AUDIO L de esta unidad. El audio saldrá igualmente por los canales izquierdo y derecho. ANTENA COMBINADA DE VHF/UHF La antena combinada de VHF/UHF de 75 ohmios puede conectarse a la toma ANT. ANTENA SEPARADAS DE VHF/UHF En algunas zonas será necesario utilizar una antena exterior.
CONEXCIONA UN DECODIFICADOR DOLBY DIGITAL (Para DVD) SECCIÓN DE TV Si utiliza esta unidad para reproducir un disco DVD en un formato de sonido envolvente Dolby Digital de 5,1 canales, la unidad dará salida a un flujo de datos DOLBY DIGITAL desde su toma COAXIAL. Si conecta la unidad a un decodificador Dolby Digital, podrá disfrutar de una tonalidad más convincente y real, con un sonido envolvente potente y de alta calidad similar al de los cines.
AJUSTE DE CANAL SECCIÓN DE DVD REPRODUCCIÓN DE UN DISCO TV Asegúrese que ... • La unidad debe encenderse. REPRODUCCIÓN BÁSICA AUTOPROGRAMACIÓN DE CANAL DVD-V Como el ajuste inicial, todos canales están memorizados en esta unidad, incluyendo los canales no disponibles en su área. Esta función puede poner los canales sólo disponibles en la memoria. 1 2 Para empezar ¡Conecte el interruptor del amplificador y otros equipos, si fuera necesario. 1 Presione [STANDBY-ON]. ¡La alimentación se conectará.
MEMO – 39 – ES
LIMITED WARRANTY FUNAI CORP. will repair this MAGNAVOX product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.