Connections Remote Control Antenna Cable TV signal (Back of TV) VIDEO AUDIO IN (Cable box or Satellite box) or DVD Recorder IN OUT MWR10D6 2 Connect RF cable (not supplied) VIDEO IN IN Playable discs 1 This unit is compatible to play the following discs.
3 3 –1 DVD Recording Easy Recording Select the recording mode. Disc Size 8cm Disc • You can set up to 8 programs (once, daily or weekly). • Be sure to set the clock before starting a timer programming. Timer Programming list appears. Select any blank line with [K/L] and press [OK]. Recording Video/Sound Quality time Timer Programming Date (good) 1. --- 2. --- 3. --- 4. --- 45 min 5. --- (3Hr) 54 min 6. --- 7. --- (4Hr) 72 min 8.
Recordable disc DVD Recorder TOLL FREE : 1 800-605-8453 or visit our web site at http://www.funai-corp.com Connection to a TV (Before you use this unit, you need to complete connections.) (Back of This Unit) COMPONENT VIDEO OUTPUT VIDEO IN IN S-VIDEO IN OUT VIDEO OUT Y L OUT L PB/CB R ANTENNA R PR/CR AUDIO IN (E1) 1 RF cable (supplied) AC 120V ANT IN AUDIO OUT 5 (Back of TV) Set channel 3 or 4.
Before you start Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before you start IMPORTANT SAFEGUARDS NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.
Before you start Precautions (cont’d) Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Before you start Before you start Precautions (cont’d) Maintenance CLEANING THE CABINET • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. Getting started CLEANING DISCS • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.
Before you start Table of contents Before you start . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbol in this Owner’s Manual . . . . . . . . . . . . . . . 7 Functional overview . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing batteries in the remote control . . . . . . .
Before you start Before you start Features This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. You can divide a title into two or more. Putting name on disc: You can put your favorite disc name. Compatibility Available for playing discs on a regular DVD player: Recorded discs can be played on regular DVD players, including computer DVD drives compatible with DVD-Video playback.
Before you start Functional overview Front Panel 1 2* 3 4 5 6 7 8 *The unit can also be turned on by pressing this button. 12 1. 2. 3. 4. 5. 6. Disc tray Place a disc when opening the disc tray. OPEN/CLOSE A button* Press to open or close the disc tray. PLAY B button Press to start or resume play. RECORD I button Press once to start a recording. Press repeatedly to start a One-touch Timer Recording. PREV H button During playback, press to return to the beginning of the current chapter or track.
Before you start Before you start Functional overview (cont’d) Rear Panel 1 2 3 VIDEO IN IN COMPONENT VIDEO OUTPUT S-VIDEO OUT VIDEO OUT Y L OUT DIGITAL AUDIO OUTPUT PCM / BITSTREAM L Connections IN 4 PB/CB R ANTENNA AUDIO IN R PR/CR (E1) 11 10 9 8 7 COAXIAL AUDIO OUT 6 5 Playing discs Editing Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. Recording 7.
Before you start Functional overview (cont’d) Remote Control 1 16* 2 5 7 3 17 4 18 6 8 9 10 13 19 20 21 11 12 22 14 24 23 15 (*) The unit can also be turned on by pressing this button. 1. STANDBY-ON button Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. 2. Number/Character buttons Press to select channel numbers. Press to select a title/chapter/ track on display. Press to enter values for the settings in the Setup menu.
Before you start Install two “AAA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit. • Remote control for different devices can interfere with each other.
Before you start Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu. Then using [K / L], select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup 1 2 3 4 5 6 7 Disc Edit Playback Display Recording Clock Channel Disc Edit 1.Required Settings: To set up the required settings. 2.Playback: To set up the unit to play discs as you prefer. 3.
Connections Before you start Connection to a TV Antenna Cable TV signal Antenna Cable TV signal (Back of TV) VIDEO AUDIO IN (Back of TV) or or 1 OUT VIDEO OUT Y L OUT L DIGITAL AUDIO OUTPUT PCM / BITSTREAM PB/CB Connect Disconnect S-VIDEO IN Plug in the AC power cord of this unit.
Connections Connection to a cable box or satellite box (Back of TV) VIDEO (Cable box or Satellite box) IN OUT Connect RF cable (supplied) VIDEO IN COMPONENT VIDEO OUTPUT S-VIDEO IN RF cable 1 (Commercially Connect available) 4 3 Connect Video cable (supplied) 2 Cable TV signal AUDIO IN IN OUT VIDEO OUT Y L OUT Connect Audio cable (supplied) L DIGITAL AUDIO OUTPUT PCM / BITSTREAM PB/CB R ANTENNA AUDIO IN (E1) R PR/CR AUDIO OUT COAXIAL (Back of this unit) With this setup: • You c
Connections Before you start Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information.
Getting started Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit with the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. For example, when you want to record repeatedly on the same disc, select the rewritable DVD+RW/DVD-RW type disc.
Getting started Before you start Easy DVD recording (cont’d) Step 5: Select the desired channel. Step 6: Record on DVD disc. Step 7: Stop the recording. Connections Getting started Writing to Disc 90% 1 SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 2 This operation may take a while to be completed. I You can select the title you want to play from a displayed title list, and immediately start to play.
Getting started Initial setting Turn on this unit for the first time, you need to follow these steps. 1 Press [STANDBY-ON ]. 2 Turn the TV on. Select the input 3 Using [K / L], select your desired language on screen menu. Then press [OK] to set language. “Channel Preset” will automatically appear. to which the unit is connected. Refer to the table on page 13. TV's original remote control 1 Initial Setup Channel Preset 4 Press [OK] to start Channel Preset.
Getting started To select a channel Note Adding/deleting channels Select the channel number to add or delete. Press [{] or [CHANNEL -] to move to a lower channel number. Press [B] or [CHANNEL +] to move to a higher channel number. Press the Number buttons to select a channel number directly. Press [SETUP]. 4 Playing discs 1 4 Recording The channels you no longer receive or seldom watch can be deleted from the memory. You also may add channels into memory.
Getting started Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. 1 Press [SETUP]. 3 Using [K / L], select “TV Audio Select”. Press [OK]. Option window will appear. TV Audio Select 2 Stereo SAP Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. 4 Using [K / L], select “Stereo” or “SAP”. Press [OK]. Stereo: Outputs main-audio. SAP (Secondary Audio Program): Outputs sub-audio.
Getting started Before you start Setting the clock Auto Clock Setting • If you do not know your PBS channel number: Using [K / L], select “Auto”. Press [OK]. The setting will be activated. • If you know your PBS channel number: Using [K / L], select “Manual”. Press [OK]. Auto Clock Setting - Manual Set Channel No. CH 1 1 Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Clock menu will appear. Using [K / L], select “Auto Clock Setting”. Press [OK]. Option window will appear.
Getting started Setting the clock (cont’d) Manual Clock Setting 1 Press [SETUP]. 4 Using [K / L], enter the date (month / day / year). Press [{ / B] to move the cursor. 2 Clock Setting Using [K / L], select “Clock”. Press [OK]. JAN / 01 / 2006 ( SUN ) 12: 00 AM 3 Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. Clock Setting ---- / -- / ---- ( ---- ) -- : -- -- 5 Using [K / L], enter the time (hour / minute). Press [{ / B]. A cursor will move to AM.
Getting started Before you start Setting the clock (cont’d) Setting the Daylight Saving Time 3 1 Using [K / L], select “Daylight Saving Time”. Press [OK]. Option window will appear. Connections When “Daylight Saving Time” is ON, the unit clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “On” has been selected as the default. Daylight Saving Time ON OFF Using [K / L], select “ON” or “OFF”. Press [OK].
Recording Information on DVD recording Information Recording mode This unit can record to DVD+RW, DVD-RW, DVD+R and DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. These discs are formatted with DVD+VR mode automatically. Discs other than DVD+VR mode cannot be recorded in this unit. You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.
Recording Making discs playable in other DVD player (Finalize/Make Edits Compatible) DVD+RW ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ DVD-R/DVD-RW DVD+R ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ Playable Recording This Unit Getting started Editing titles Connections After recording on DVD+R/DVD-R/DVD-RW, you must finalize the disc in order to play on other units. (Refer to page 36.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on other units after editing.
Recording Before recording Replacing disc menu DVD+RW DVD+R +VR DVD-RW +VR DVD-R Option window will appear. It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units. “OFF” has been selected as the default. Replace Disc Menu ON OFF 1 Press [SETUP]. 2 4 Using [K / L], select “Recording”. Press [OK]. Recording menu will appear.
Recording Before you start Basic recording +VR +VR DVD-RW DVD-R Follow the steps below to record TV programs. 7 DVD+RW DVD+R Press [STANDBY-ON ]. Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A]. The disc tray will open. 6 2 4 I Press [PAUSE F] to pause recording. Press [PAUSE F] or [REC I] again to restart recording. 8 7 7 5 6 Getting started 2 1 Connections 1 Press [REC I] to start recording.
Recording One-touch Timer Recording DVD+RW DVD+R +VR DVD-RW This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode. +VR DVD-R 4 Press [REC I] repeatedly to select desired recording time. Recording times appear on the TV screen (30 minutes to 8 hours). Recording will start.
Recording Before you start Timer Recording DVD+RW +VR DVD-RW DVD+R 1 Timer Programming Date 2 1. --- 2. --- 3. --- 4. --- 5. --- 6. --- Start End CH Mode 1. JAN/01 ----- 5. --- 2. --- 3. --- 4. --- 7. --- 8. --- End CH 1:57AM CH 8 Mode Start End CH --:-- --:-- E1 Mode To record from external input, 5. --6. E1 --select or E2. 6 Using [K / L], select a recording mode. Start End 1. JAN/01 12:57AM 2. --- 3. --- 6. --- 7.
Recording Timer Recording (cont’d) Checking, canceling, or correcting the timer programming information 1 Press [STANDBY-ON ]. TIMER REC indicator will be off. 2 Press [TIMER PROG.]. Timer Programming list will appear. Timer Programming Date Start 1. JAN/01 12:57AM 3 2. --- 3. --- 4. --- 5. --- End CH 1:57AM CH 8 Mode HQ 6. ---the information on the Check --list7.8.you will need. --- 1 6 4 To clear the timer programming: Using [K / L], select the program. Press [CLEAR].
Recording Hints for Timer Recording Recording This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority. A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary. PROG. A PROG. B PROG.
Recording Overwriting an existing title Overwriting from the beginning of the title DVD+RW +VR DVD-RW You can overwrite the existing title from the beginning. 4 Using [K / L], select a title to be overwritten. Press [OK]. 1 Turn on the unit. Make sure that the TV input is set on the unit. 2 Load the disc that includes a title to be overwritten. Title list will appear. If the title list does not appear, press [DISC MENU].
Recording Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. Connections When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Before you start Overwriting an existing title (cont’d) Title name: A Existing Title (B) After overwriting Getting started Title name: B PROG.
Recording Settings for an external source Connection to an external source DVD+RW +VR DVD-RW DVD+R +VR DVD-R Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Another source (VCR camcorder etc.
Recording Before you start Settings for an external source (cont’d) Recording from an external source DVD+RW DVD+R +VR DVD-RW +VR DVD-R 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 13. 1 4 2 3 Connections Before recording from an external source, see the instructions for the connection on page 34. 2. Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly. Getting started 3.
Recording Playing the discs in other DVD players Finalizing a disc DVD+R +VR DVD-RW +VR DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Details are on page 25. To cancel finalizing... (DVD-RW only) • To cancel finalizing at step 4, press [STOP C], select “Yes” with [{ / B], then press [OK].
Recording Before you start Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R +VR DVD-RW +VR DVD-R Using [K / L], select “Disc Full” or “End of Timer Rec”. Press [OK]. Option window will appear. Connections You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space.
Playing discs Information on DVD play Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit. Other disc types are not guaranteed to play. Disc Logo DVD-VIDEO DVD+RW is used primarily in the United States and Canada).
Playing discs Before you start Basic playback Playback DVD+RW DVD+R +VR DVD-RW +VR DVD-R 1 Pop-up window will appear. Play Edit Overwrite 1 SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 2 NOV/22/06 11:35AM CH13 EP NOV/22/06 0:10:33 2 3 EMPTY TITLE 1:37:52 SP(2Hr) Insert your disc with its label facing up. Align the disc to the disc tray guide.
Playing discs Basic playback (cont’d) DVD-V Video DVD-R Video DVD-RW 1 Press [STANDBY-ON ]. Turn the TV on and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. 3 Insert your disc with its label facing up. Align the disc to the disc tray guide. CD Video CD 4 Press [PLAY B] to start playback. Playback will start. If you are playing a DVD-Video disc or Video CD with PBC function, a menu may appear.
Playing discs Before you start Basic playback (cont’d) Playing discs using the disc menu DVD-V Continue this step to set up all the features you want or to start playing the disc from the menu. 3 Press [DISC MENU] to exit the disc menu. Using [K / L / { / B], select an item. Press [OK] to confirm. 1 2 3 2 Note • Menus vary among discs. Refer to the information accompanying the disc for details. Recording 2 1 Getting started Press [DISC MENU]. Disc menu will appear.
Playing discs Special playback Resume play DVD-V Video DVD-RW DVD+RW +VR DL DVD+R DVD+R DVD-RW CD Video CD MP3 Video DVD-R You can resume play from where you stopped playing the disc last. +VR DVD-R In a few seconds, play will resume from the point at which it stopped last. You can resume play at the same point even if you turn off the unit. 1 During playback, press [STOP C]. The resume message will appear.
Playing discs Before you start Special playback (cont’d) Rapid play DVD-V DVD+RW Video Video DVD-RW +VR DL DVD+R DVD-RW DVD+R DVD-R During playback, press [RAPID PLAY]. : Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. B : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback. B : Press [RAPID PLAY] three times to play back in normal speed. No effects.
Playing discs Special playback (cont’d) Zoom DVD+RW DVD-V Video Video DVD-RW DVD-R 0:00:00 +VR DVD-R Video CD 3 During playback, press [DISPLAY]. Display menu will appear. 1 DVD-RW DVD+R 1 1 +VR DL DVD+R Using [K / L], select a desired zoom factor to zoom. Press [OK]. The zoom area will be displayed. DVD-Video 2 3 4 1 2 Using [{ / B], select [OK]. Zoom menu will appear. 1 1 0:00:00 . Press Note DVD-Video 4 1.2 1.5 2.0 There are four options (x1.0, x1.2, x1.5 and x2.
Playing discs Before you start Search Title/Chapter search DVD+RW DVD-V Video DVD+R DL DVD+R +VR DVD-RW +VR DVD-R Video DVD-RW DVD-R Connections Using [PREV H] / [NEXT G] 1 1 Getting started During playback, press [NEXT G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. To go back to the beginning of the current title or chapter, press [PREV H].
Playing discs Search (cont’d) Track search CD Video CD MP3 Using [PREV H] / [NEXT G] 1 1 During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track. The track will move backward one at a time. Using [DISPLAY] 1 During playback, press [DISPLAY]. Display menu will appear.
Playing discs Before you start Repeat/Random/Program playback Repeat playback DVD+RW DVD-V Video DVD-RW DVD-RW CD Video CD MP3 Video DVD-R Using [K / L], select a desired option to repeat. Press [OK]. The selected repeat play will start. DVD-Video Using [{ / B], select . Press [OK]. Repeat menu will appear. 1 0:00:00 DVD-Video OFF Title Chapter A-B 1 0:00:00 Audio CD OFF Track All A-B 1 0:00:00 MP3 A-B: The A-B point will be played repeatedly.
Playing discs Repeat/Random/Program playback (cont’d) Program playback CD 5 Video CD You can program the disc to play in your desired order. 1 Press [SETUP]. 4 Using [K / L], select a desired track. Press [OK] or [B]. A cursor will move to next. 2 3 4 1 Program Play 2 Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear.
Playing discs Before you start Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V CD Video CD
Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes. 2 2 Using [{ / B], select . Press [OK]. Angle will switch each time you press [OK]. 1 1 During playback, press [DISPLAY]. Display menu will appear.
Editing Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original.
Editing Editing discs Deleting titles DVD+RW DVD+R +VR DVD-RW You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to record on will be increased. For DVD+R and DVD-R disc, the disc space to record on will not be changed. +VR DVD-R 4 Using [K / L], select “Title Delete”. Press [OK]. Confirmation window will appear.
Editing Before you start Editing discs (cont’d) Putting names on titles DVD+RW DVD+R +VR DVD-RW +VR DVD-R Using [K / L], select “Yes”. Press [OK]. The name you entered will be activated for the title. 3 Connections You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. 4 Edit Title Name 6 Yes No 5 Follow steps 1 to 3 on page 52 to display the Edit menu.
Editing Editing discs (cont’d) Setting chapter marks DVD+RW +VR DVD-RW DVD+R You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. 1 Follow steps 1 to 3 on page 52 to display the Edit menu. 2 +VR DVD-R • It is convenient to use [PREV H],[NEXT G], [REV E] and [FWD D] for finding the point at which a new chapter mark is to be added.
Editing Before you start Editing discs (cont’d) Clearing chapter marks (cont’d) 6 Press [RETURN] to exit. This operation may take a while to be completed. Connections Data will be written onto the disc momentarily. 6 Getting started To delete all chapter marks: 1 Follow steps 1 to 3 on page 52 to display the Edit menu. Using [K / L], select “Chapter Mark”. Press [OK]. Option window will appear as illustrated on page 54. Using [K / L], select “Delete All”. Press [OK].
Editing Editing discs (cont’d) Hiding chapters DVD+RW DVD+R +VR DVD-RW You can hide chapters from the title list. Hidden chapters are skipped during playback. 1 Follow steps 1 to 3 on page 52 to display the Edit menu. 2 Using [K / L]], select “Current Chapter”. Press [OK]. Option window will appear. Current Chapter 1 2/ 2 5 After this operation is completed, press [RETURN] twice to exit. Data will be written onto the disc momentarily. 3 This operation may take a while to be completed.
Editing Before you start Editing discs (cont’d) Setting pictures for thumbnails DVD+RW DVD+R +VR DVD-RW 1 2 Using [K / L], select “Index Picture”.Press [OK]. Using [K / L], select “Yes”. Press [OK]. A picture for thumbnail will be set. 5 Press [RETURN] to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. 3 Getting started Follow steps 1 to 3 on page 52 to display the Edit menu.
Editing Editing discs (cont’d) Dividing a title DVD+RW 4 +VR DVD-RW You can divide one title into two new titles. 1 Follow steps 1 to 3 on page 52 to display the Edit menu. 2 Using [K / L], select “Title Dividing”. 3 Using [K / L], select “Yes”. Press [OK]. The title will be divided into two new titles. Both title names are identical, and index pictures are reset to the first scene at this point. 3 Data will be written onto the disc momentarily. This operation may take a while to be completed.
Editing Before you start Editing discs (Setup menu) Putting name on disc DVD+RW DVD+R +VR DVD-RW Press [STOP C] if you are playing a disc. 3 Using [K / L], select “Edit Disc Name”. Press [OK]. A window for entering a title name will appear. Connections You can put title names on the titles and change the names from this menu. +VR DVD-R Edit Disc Name 1 A B C 1 2 3 Press [SETUP].
Editing Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD+RW DVD+R +VR DVD-RW To prevent accidental editing, or erasing the titles, you can protect them. 1 Follow steps 1 to 2 on page 59 to display the Disc Edit menu. +VR DVD-R 2 Using [K / L]], select “Disc Protect OFF ON”. Press [OK]. Confirmation window will appear.
Editing Before you start Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont’d) Releasing disc from protect 1 Using [K / L]], select “Disc Protect”. Press [OK]. Confirmation window will appear. Disc Protect ON Connections Follow steps 1 to 2 on page 59 to display the Disc Edit menu.
Editing Editing discs (Setup menu) (cont’d) Erasing disc DVD+RW +VR DVD-RW Video DVD-RW You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc and format it. Press [STOP C] if you are playing a disc. 2 Using [K / L]], select “Erase Disc”. Press [OK]. Confirmation window will appear. Erase Disc Yes 2 3 No 1 Follow steps 1 to 2 on page 59 to display the Disc Edit menu.
Changing the Setup menu Before you start Tour of the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) English French Spanish Set the language for disc menu. Audio Language Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. English Français Español Set the language for OSD (On Screen Display).
Changing the Setup menu Language setting Press [STOP C] if you are playing a disc. 1 Press [SETUP]. 2 2 3 4 Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. 3 1 Using [K / L], select “Language”. Press [OK]. Language menu will appear. 4 Using [K / L], desired item. Press [OK]. Disc Menu Language (Default : English) Set the language for Disc Menu.
Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Note Language - Subtitle • When you finish entering the code, press [OK]. Refer to the language code table on page 74. Code Input - - - - Press [SETUP] to exit. 5 Recording Display setting Press [STOP C] if you are playing a disc. 1 2 Using [K / L], select “Display”. Press [OK]. Display menu will appear. Playing discs 2 3 Press [SETUP].
Changing the Setup menu Display setting (cont’d) Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. • Using [K / L], select a setting. Press [OK]. Your setting will be activated. Screen Saver Display English OFF Angle Icon ON 5 minutes Screen Saver 10 minutes 10 minutes OSD Language 15 minutes 30 minutes 4 Press [SETUP] to exit. 4 Audio setting Choose the appropriate Audio settings for your external equipment. It will only affect a disc playback.
Changing the Setup menu Before you start Audio setting (cont’d) A Settings for PCM (Default : 48kHz) 48kHz 96kHz Settings for Dolby Digital (Default : Stream) PCM Stream Disc Audio Dynamic Range Control Digital Out Dynamic Range Conrtol ON ON OFF • Using [K / L], select a setting. Press [OK]. Your setting will be activated. Playing discs Dynamic Range Control (Default : ON) Set to “ON” to compress the range between soft and loud sounds. Recording • Using [K / L], select a setting.
Changing the Setup menu Video setting Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. 1 Press [SETUP]. 2 2 3 4 5 6 7 Using [K / L], select “Playback”. Press [OK]. Your setting will be activated. 3 Using [K / L], select “Video”. Press [OK]. 4 Using [K / L], select “Progressive Scan”.
Changing the Setup menu Before you start Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. 2 3 4 1 Press [SETUP]. 2 Connections Press [STOP C] if you are playing a disc. 1 Getting started Using [K / L], select “Playback”. Press [OK]. Playback menu will appear.
Changing the Setup menu Settings for Parental lock level (cont’d) B A password has been set already. Parental Lock Parental Lock Change password? Yes Password Input Parental Lock Yes Password Input No * * * * • Using the Number buttons, enter the current password. - - - - • Using[K / L], select “Yes”. Press [OK]. • Using the Number buttons, enter a new password. Press [OK]. Your setting will be activated. • If you select “No”, proceed to step 5.
Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Remedy • Check that the AC power cord is connected securely. • (In case of power failure) Check the breaker. Picture There is no picture. TV program pictures are distorted.
Others Troubleshooting (cont’d) Symptom Playback The disc does not play. Remedy • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CD-ROM) (page 38). • The region code on the DVD-Video does not match the unit (page 38). • Moisture has condensed inside the unit.
Others Before you start Troubleshooting (cont’d) Symptom Others Remedy The disc tray does not open when you press [OPEN/CLOSE A]. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. “Repairing” appears on the TV screen.
Others Troubleshooting (cont’d) Error message Cause Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Control Information is full. Recording Error You cannot record on this disc as Power Calibration Area is full. Recording Error This disc is already finalized. Recording Error The disc has a different menu layout. (Set “Replace Disc Menu” to ON to rewrite the menu.
Others Dolby Digital Regions code An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or Multi-channel audio. Regions associate discs and players with particular areas of the world. This unit will only play discs that have compatible region codes.
Others Specifications General System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format DVD-Video, DVD+R/RW, DVD-R/RW, CD-DA, CD-R/RW AC120 V, 60 Hz 20 W (standby: 1.6 W) 5.06 lbs ( 2.
Español Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos. Connections Paso 1: Elija un tipo de disco. Before you start Fácil grabación de DVD Paso 2: Encienda la unidad.
Español Fácil grabación de DVD (cont.) Paso 5: Eleccione el canal des eado. Paso 6: Grabe en discos DVD. Paso 7: Pare la grabación. Escrit de datos 90% 1 SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 2 ENPTY TITLE 1:41:17 SP (2Hr) CH 12 I Esta operación puede demorar en completarse. Sugerencia 1: Reproduzca el contenido grabado Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente.
MEMO EN 79
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.