Portable Blu-ray Disc Player PB1-M200 Owner’s Manual For Customer Use: Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference. Model No. __________________________ Serial No.
INTRODUCTION Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. This product consists of materials which can be recycled and reused if disassembled by a specialised company. Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste.
Notice for the Progressive Scan Outputs Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 or 576 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 480p or 576p product, please contact our customer service centre.
Supplied Accessories • Remote Control with button-type lithium battery (CR2025, 3V × 1) • AC adapter (JS-12020D-2E) • Battery pack 7.2V (BTRP-M100) • Car DC adapter • Mains cable • • • • • AV cable Owner’s Manual Quick Start Guide CD-ROM Warranty card Note • Do not use or connect following supplied accessories with other devices. - AC adapter - Battery pack 7.2V - Car DC adapter Contents INTRODUCTION Safety Instructions .............................................. 2 Maintenance .......................
Trademark Information “x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S.
Symbols Used in this Manual To specify which media type each function is applicable to, we put the following symbols at the beginning of each item to operate. Symbol Description Description refers to BD-video and BD-RE (ver.2.1) / BD-R (ver.1.1/1.2/1.
Main Unit 1 4 5 2 3 Left side Right side 8 6 9 OPEN 14 15 1. 2. LCD screen Infrared sensor window Speakers K / L / 0 / 1 buttons OK button Disc lid / Turntable A OPEN button DC IN 12V jack 3. 4. 5. 6. 7. 8. 10 11 12 13 7 16 17 18* 19 20 21 22 23 9. 10. 11. 12. 13. 14. 15. 16. 17. SD card slot AV OUT jack (headphone) jack HDMI OUT jack LAN terminal CHARGE indicator STANDBY/ON indicator STANDBY/ON button OPTION button 18. 19. 20. 21. 22. 23.
Remote Control All the instructions described in this manual are based on the operation using the remote control. 1. 1 2 3 4 26 5 25 2. 3. 4. 5. 6 24 7 23 22 21 20 19 8 9* 10 11 12 18 17 16 13 15 14 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Using a Remote Control Remote Control Usage Guidelines: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.
Opening Screen In stop mode, opening screen is displayed.
PREPARATIONS Attaching the Battery Pack Power Supply 1 Place the battery pack as illustrated This unit can be used with AC adapter, battery pack or car DC adapter. below. Battery pack Using the Unit with AC adapter left side of this unit Bottom of this unit AC adapter (supplied) mains cable (supplied) AC outlet 2 Slide the lock on the right side in the direction of the arrow.
Caution Note • Turn off the unit before attaching or detaching the battery pack. • Detach the battery pack when you do not use it. • When the battery is empty; - The empty battery icon will be displayed even if “Battery Icon” is set to “Off”. - The empty battery icon and CHARGE indicator flashes. • When the AC adapter is connected, the battery icon will not be displayed even if “Battery Icon” is set to “On”.
Connecting to TV Note You can enjoy the video and audio of this unit on your TV. • When you make connection with your TV, both this unit and the TV should be turned off. • Refer to the manual of your TV for more information. HDMI Video / Audio Connection Your TV right side of this unit HDMI IN HDMI cable (not supplied) 14 • Do not tilt the connector when inserting it into the HDMI jack and make sure the shapes of the jack and the connector are matched.
Standard Video / Audio Connection Your TV right side of this unit VIDEO IN Network Connection with LAN By connecting this unit to the Internet, you can update the software via the Internet or access the BD-Live and vTuner service. Networking equipment (modem, etc.) Hub or broadband router WAN LAN LAN 5 4 3 2 1 L AUDIO IN Internet LAN cable (not supplied) AV cable (supplied) right side of this unit R • Connect this unit directly to the TV.
LCD Control You can adjust the pictures on the LCD screen. 1 Press [LCD]. 2 Use [K / L] to select the desired setting. ” (Brightness) : “ Adjusts the brightness level of the picture. (-7 to +7) “ ” (Contrast) : Adjusts the contrast level of the picture. (-7 to +7) “ ” (Sharpness) : Adjusts the sharpness level of the picture. (-7 to +7) “ ” (Hue) : Note • You can also set the LCD settings in the setup menu. (Refer to page 43.) • “LCD Control” is also selectable in the option menu.
PLAYBACK Information on Playback Before you start playing back a disc, read the following information. Playable Discs and Files This unit is compatible playing back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and colour systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back. Playable discs Blu-ray Disc - BD-video (single / dual layer) - BD-RE ver. 2.
MP3/Windows Media™ Audio • Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz • Constant bit rate : 112 kbps - 320 kbps (MP3), 48 kbps - 192 kbps (Windows Media™ Audio) JPEG • Upper limit • Lower limit • File size of image maximum : 2,560 x 1,900 dots (sub sampling is 4:4:4) 5,120 x 3,840 dots (sub sampling is up to 4:2:2) : 32 x 32 dots : 12 MB Note for SD Memory Cards • This unit supports SD Memory Card with FAT12/ FAT16 file system, and SDHC Memory Card with FAT32 file system.
Region Codes This unit has been designed to BD-video play back BD-video with region “B” and DVD-video with region “2” or “ALL”. You cannot play back BD-video or DVD-video that are labelled for other regions. Look DVD-video for the symbols on the right on your BD-video or DVD-video. 2 If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world.
Track / File information 1 / 14 0 : 00: 51 SD 1 2 3 Decoding format information G 4 1. Current tracks (files) number / Total number of tracks (files) 2. Elapsed time (or remaining time) of the current track / file (except for JPEG files) 3. Indication of SD Memory Card playback 4. Current repeat setting (Only when repeat setting is active) (T: Track repeat, G: Group repeat, A: All repeat) Disc information 1 / 14 0 : 00: 51 1 2 Dolby Digital 1 1.
Volume Control You can control the volume level of the audio output from the speakers. To increase or decrease the volume level : Press [VOL.+] or [VOL.–]. • The volume level will increase or decrease, every time you press [VOL.+] or [VOL.–]. • You can also increase or decrease the volume level by holding down [VOL.+] or [VOL.–]. • The volume level will be displayed on the LCD screen. Note • This function is only available for the audio output from the speakers of this unit or (headphone) jack.
To stop playback: Press [C (stop)]. Playback will be in Resume-On-Stop mode. Resume-On-Stop mode If a playback is in Resume-On-Stop mode, when you press [1 (play)] next time, the playback will start from the point where it has been stopped. Note • • • Note • Resume playback may not be available for the BD that supports Java applications (BD-Java). • In the “Disc” mode, the resume information will be cleared when; - [C (stop)] is pressed while in the Resume-On-Stop mode. - the parental level is changed.
Disc menu (DVD-video) 1 Press [POP MENU / MENU]. 2 Use [K / L / 0 / 1] to select an item, then press [OK]. Playing Back an Audio CD or a Disc with DivX® / MP3 / Windows Media™ Audio / JPEG Files 3 Press [POP MENU / MENU] to exit. Pop-up menu (BD-video) This is a special feature available for some BD-videos. When you press [POP MENU / MENU], a menu pops out on the screen during playback. Before you begin, make sure the correct media mode is selected. Refer to “Selecting the Media Mode” on page 21.
3. Audio CD List of the track number and time DivX® / MP3 / WMA / JPEG List of the folder or file names in the current disc or folder 4. Operation guide Press [RED] to go to the previous page. Press [GREEN] to go to the next page. Press [YELLOW] to call up the subtitle list. Press [BLUE] to select “Media Mode”. 5. Current page / Total page number(s) 6. Playback status 7. Media icon : Folder : audio CD tracks : DivX® files : MP3 files : WMA files : JPEG files 4 Press [C (stop)] to stop playback.
KODAK Picture CD Tips for JPEG / KODAK Picture CD Playback This unit can also run JPEG files stored on KODAK Picture CD. You can enjoy picture images on the TV set by playing back the KODAK Picture CD. This unit conforms to ver.7.0 of KODAK Picture CD. For details of KODAK Picture CD, contact a shop that provides developing service of Kodak Inc. 1 When KODAK Picture CD is inserted in this unit, KODAK Picture CD menu will appear automatically on the screen.
Reading the SD Memory Card You can play back the AVCHD / DivX® / MP3 / WMA / JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the following functions. - Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional contents, refer to the instruction book that came with the disc.) - BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live, refer to page 33.
About DivX® and DivX® VOD Useful tips for purchased or rented official DivX® Certified Videos • When you purchase or rent a DivX® file through the official site of DivX® video which is called DivX® Video On-Demand (VOD) services, a registration code is required every time you get the new file from the DivX® VOD services. Refer to “DivX® VOD” in “FUNCTION SETUP” on page 47. Possible Errors “This rental has V views left.
Playing Back DivX® with DivX® External Subtitle Subtitles created by the user can be displayed during DivX® playback. 1 Follow steps 1 to 3 in “Playing Back 2 an Audio CD or a Disc with DivX® / MP3 / Windows Media™ Audio / JPEG Files” on pages 23-24. Select a file you want to play back, then press [YELLOW]. Subtitle list will appear. TR -/9 Subtitle List DivX_File Note • To utilise this function, the following conditions must be met: - Playback file and subtitle file must have the same name.
Fast Forward / Fast Reverse Slow Forward Playback 1 During playback, press [F (pause)], 1 During playback, press [D (forward)] repeatedly for fast forward. During playback, press [E (reverse)] repeatedly for fast reverse. Every time you press [D (forward)] or [E (reverse)], the playback speed will change. • You can also fast forward or fast reverse the playback by holding down [T (next)] or [S (previous)] on the unit. (Playback speed will change while holding down [T (next)] or [S (previous)] on the unit.
Repeat Playback Random Playback Available repeat functions vary depending on the discs. 1 During playback, press [REPEAT] repeatedly to select the desired repeat mode. Repeat mode Chapter repeat The current chapter will be played back repeatedly. Title repeat Available media The current title will be played back repeatedly. Track repeat The current track will be played back repeatedly. Group repeat The current folder will be played back repeatedly.
Note • During the random playback, press [C (stop)] once to set the resume point, and then press [1 (play)] to resume random playback from where [C (stop)] was pressed (audio CD) or from beginning of the file where [C (stop)] was pressed (MP3 / WMA / JPEG). • To repeat the current track / file in the random selection, press [REPEAT] repeatedly until “ Track” appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until “ All” appears during playback.
HD Noise Reduction PIP (BONUSVIEW) Setting Reduces the noise of the playback picture. 1 During playback, press [MODE] appears. repeatedly until Use [0 / 1] to change the setting. 2 HD Noise Reduction Off Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video. e.g.) DVD-video “Off”: Shows the original picture as recorded.
Camera Angle Some BD-video and DVD-video contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the screen. 1 During playback, press [ANGLE]. • The selected angle will be displayed on the display bar at the top of the screen. 2 Use [K / L] to select your desired angle. 1/3 How to Activate the BD-Live Function 1 Insert the disc with BD-Live 2 function. Insert an SD card with enough capacity. (SD card of 1GB or more is recommended.
Note • You must connect the unit to the Internet and set up necessary settings in order to use BD-Live. • For certain discs, “BD-Live Setting” may need to be changed. • Depending on your connection environment, it may take time to connect to the Internet or the Internet may not be connected. • When BD-Live functions are used and the unit is connected to the Internet, you may be charged for this communication.
Note • During random playback, search functions are not available except the search using [S (previous) / T (next)]. • Time search is available only in the same track, file or title. • For BD and AVCHD, chapter and time search are available only during playback. • For some DivX® files, time search may not function. Using [the Number buttons] (Direct Search) Title search In stop mode, enter the title number you want to search using [the Number buttons]. Playback of the title will start in a few seconds.
Note • Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu. • If a 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 61. • If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the screen.
Note • The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”. (For some BD, secondary audio will be output even when secondary video is off.) • The sound mode cannot be changed during playback of discs not recorded in multiple audio. • Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the discs. Refer to the manual accompanying the disc.
Enjoying Internet Radio with vTuner With this unit, you can enjoy Internet radio with vTuner via the Internet. In order to listen to Internet radio, you must connect this unit to the Internet. - For the network connection, refer to “Network Connection with LAN” on page 15. - For the network setup, refer to “Network Connection” on pages 51-55. Internet Radio Playback After you set up the network connection, follow the procedure below to listen to Internet radio.
Guide to the Playback Screen Note • This unit cannot play back stations with audio format other than MP3 and WMA. • Internet radio service may not be fully available with narrowband Internet connection. (e.g. 56k modem) When listening to Internet radio, use a broadband Internet connection. (For details, contact your Internet service provider.) • Depending on the bit rate of a station or the network environment, it may take a while to complete loading the station or playback may not be available.
Note • You can also add your favourite stations to “Favorites” on your PC. To add your favourite stations on your PC, visit http://go2service.vtuner.com/FE and create a vTuner account with the access code, which you can check from the category list. (Refer to page 38.) • “My Favorites” will appear after you add a station to “Favorites” on this unit. (Your favourite station will also be added to “My Favorites”.) Remove from Favourite List 1 Follow step 1 in “Internet Radio 2 3 Playback” on page 38.
FUNCTION SETUP In the setup menu screen, you can access various kinds of menus, and customise them as you prefer. To call up the setup menu screen, press [SETUP] on the remote control or select “Setup” in the option menu. (Option menu can be called up by pressing [OPTION] on the unit.) Then follow the instructions below to navigate through the screen. < Setup menu screen > 1. Quick 2. 1 Mode Select Disc LCD Control 2 Player Menu English Network Connection Easy 3 4 3. 4.
Category Language Disc Menu Player Menu* Custom DivX Subtitle Video TV Aspect Menus / Options English Japanese German Korean French Danish Italian Finnish Spanish Norwegian Dutch Icelandic Swedish Hungarian Russian Romanian Chinese Turkish Auto (XXX) English Deutsch Français Polski Italiano Español Nederlands Čeština Slovenský Magyar Русский Română Български English Portuguese German Polish French Italian Spanish Dutch Swedish Russian1 Russian2 16:9 Wide 4:3 Pan & Scan 4:3 Letter Box 16:9 Squeeze Aut
Custom Category Video EN LCD Control* Menus / Options Brightness -7~+7 Contrast -7~+7 Sharpness -7~+7 Hue -7~+7 Saturation -7~+7 Monitor On Off Default Progressive Mode Auto Video Still Mode Auto Field Frame default is 0 default is 0 default is 0 default is 0 default is 0 Description Sets and adjusts the picture quality of LCD screen. Sets whether to turn on or off the LCD screen. Sets all the LCD Control setting to the default setting. Sets the optimum progressive mode for the image material.
Note for “HDMI Video Resolution” • Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p/576p signal will be output. • Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode. • You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.
Custom Category Audio BD Audio Mode HDMI Audio Out • This setting is available only when the TV is connected by an HDMI cable. Menus / Options Mix Audio Output HD Audio Output HDMI Multi(Normal) HDMI Multi(LPCM) • The multichannel audio signals are output from HDMI OUT jack with LPCM. Speaker Size • Selects the desired speaker to set. Then change the setting by referring to the descriptions.
HDMI Audio Out • This setting is available only when the TV is connected by an HDMI cable. Menus / Options HDMI Channel Level Multi(LPCM) • Tests or sets • The the volume multifor each channel speaker. audio signals are output from HDMI OUT jack with LPCM. Custom Category Audio Delay Time • This is a parameter for optimizing the timing at which the sound outputs from the speakers according to the distance from the listening position.
Category Parental Password • Refer to input field page 50 for more information. Others Angle Icon Battery Icon Menus / Options BD Rating Level All Age Setting DVD Rating All Level 8 to 1 Password Password input field Change On Off On Off Registration Code Your registration code is : VVVVVVVVVV To learn more visit www.divx.com/vod Deactivation Code Your deactivation code is : VVVVVVVV To learn more visit www.divx.
Category Others Network Connection* • Refer to pages 51-55 for more information. Menus / Options Connection Test Easy Custom Custom Description Perform a network connection test. After you change IP address or DNS setting, always perform this test. If you select “Easy”, connection test will automatically start. IP Address Auto Set the IP address. Setting (DHCP) In most cases, you can Manual IP Address connect to the Internet without making any Subnet changes to the default Mask setting.
Initialise Custom Category Others EN Software Update • This setting is available only when the AC adapter is connected. • Refer to page 55 for more information. Reset Settings No Yes Format SD Card Erase Saved BD-ROM Data (Player) Erase Saved BD-ROM Data (SD Card) Reset Network Settings No Yes No Yes No Yes No Yes Menus / Options Current Version Disc Update No Yes Network Update No Yes Description Indicates the current software version. Allows you to update this unit’s software using a disc.
Parental All [SETUP] A “Custom” A “Parental” Some BD-videos or DVD-videos feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will play back. This feature prevents your children from viewing inappropriate material. 1 Use [K / L] to select “ ”, then press [OK]. 8 7 6 5 4 • Password input field appears. 2 If a password has not been set, 3 follow A).
fun-Link(HDMI CEC) [SETUP] A “Custom” A “Others” A “fun-Link(HDMI CEC)” You can control all fun-Link(HDMI CEC) compatible components connected via an HDMI cable by simple button operation on the remote control for this unit. In order to enable the function, you need to set “fun-Link(HDMI CEC)” to “On”. One Touch Play fun-Link(HDMI CEC) operations are performed using remote control buttons shown on page 51. The TV will automatically be turned ON and switched to the appropriate input channel.
Note Note • If the connection test passes, you are ready to use BD-Live, vTuner service or network update function using the Internet without making any extra settings. • If the connection test fails, you may need to change the MAC address settings on your router. You can check the MAC address of this unit on “Custom” screen. • “Connection Test” is not available when “Disable” is selected in “Network Connection”.
IP Address Setting / DNS Setting 3-d) 1 Follow steps 1 to 4 in “Connection Test” on page 51. 2 Use [K / L] to select “Custom”, then press [OK]. 3 Use [K / L] to select “IP Address Setting”, then press [OK] repeatedly to select the desired setting. “Auto(DHCP)” : “Manual” : If your router has DHCP server function, select “Auto(DHCP)”. If your router does not have DHCP server function, select “Manual”. If you select “Manual”, follow the instructions below to set the IP address and DNS.
Proxy Setting 1 Follow steps 1 to 4 in “Connection 2 3 Test” on page 51. Use [K / L] to select “Custom”, then press [OK]. Use [K / L] to select “Proxy Setting”, then press [OK] repeatedly to select the desired setting. • For default settings, select “Do Not Use”. • If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port, select “Use”. If you select “Use”, follow the instructions below to set the proxy address and proxy port.
BD-Live Setting You can limit Internet access for BD-Live discs. (The default setting is “Allow”.) 1 Follow steps 1 to 4 in “Connection 2 3 4 Test” on page 51. Use [K / L] to select “Custom”, then press [OK]. Use [K / L] to select “BD-Live Setting”, then press [OK]. Use [K / L] to select the desired setting, then press [OK]. “Allow”: Internet access is permitted for all BD-Live contents. “Limited Allow”: Internet access is permitted only for BD-Live contents which have content owner certificates.
4 Use [K / L] to select “Yes”, then press [OK]. • Press [A OPEN] on the unit to open the disc lid. • Insert the software update disc created at step 1 and then close the disc lid. 5 After completing loading disc, confirmation message will appear. Select “Yes” and press [OK] to start updating. • It may take a while to complete the updating. 6 After the disc update finishes, this unit will restart. • Press [A OPEN] on the unit to open the disc lid and remove the disc.
Note • In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary settings. • For the network connection, refer to “Network Connection with LAN” on page 15. • For the network setup, refer to “Network Connection” on pages 51-55. • Please do not disconnect the AC adapter or LAN cable while executing the “Network Update”. • All settings will remain the same even if you update the software version.
OTHERS Troubleshooting If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem No power. No picture on the LCD screen. Cannot charge the battery pack or battery error appears on the LCD screen. No sound or picture on the connected TV via AV cable. No audio / video signal on the display device via HDMI cable. Distorted picture. Completely distorted picture or black / white picture with BD / DVD.
Problem No sound or distorted sound. Picture freezes momentarily during playback. Disc cannot be played back. SD card cannot be read. No return to start-up screen when disc is removed. The unit does not respond to the remote control. Buttons do not work or the unit stops responding. The unit does not respond to some operating commands during playback. The unit cannot read BD / DVD/ CD. Angle does not switch. Playback does not start when the title is selected.
Problem Cannot connect to the network while my PC is connected to the network. The capacity of the SD card decreased. Cannot use the BD-Live function or download of data does not perform properly. Cannot play back BD-video (BD-ROM Profile 2.0). Cannot play back Internet radio. Cannot play back the Internet radio station in my favourite list. The audio of Internet radio station interrupted. The quality of the Internet radio audio is poor or noise occurs during playback of Internet station.
Language Code List Language Code A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian [BUL] Burmese Byelorussian 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 F-H Far
Specifications General NTSC/PAL colour DC 12 V (DC IN terminal) DC 7.2 V (Battery pack) Power consumption Play mode + Recharge mode : 28 W (during BD playback) Play mode : 18 W (during BD playback) Recharge mode : 15 W (in standby mode) Standby mode : 0.5 W AC adapter Power source : AC 100-240 V, 50/60 Hz Power consumption : 12 V 2A Dimensions (width x height x depth) Main unit : 261 x 43 x 195 mm LCD screen : 10.1 inches / non-glare / 1024 x 600 pixel Weight 1.
Network Service Disclaimer Dear Customer : Please note FUNAI will not be responsible for Internet services and contents. In addition, FUNAI will not charge you for any data transferred from the Internet, but it might cause additional costs depending on your contract with the Internet provider.
DECLARATION OF CONFORMITY This product complies with the requirement of the related directives. We: FUNAI ELECTRIC EUROPE Sp. z o.o. ul. Inżynierska 1, 67-100, Nowa Sól, Poland declare that the following product: Portable Blu-ray Disc Player Model: PB1-M200 Trade Name: Funai is in compliance with the related regulations. Web Site: http://www.funai.eu © 2010-2011 FUNAI ELECTRIC All rights reserved.
