Operation Manual

36 EN
Note
• Some discs will only allow you to
change the subtitles from the disc
menu or pop-up menu. Press
[TOP MENU] or [POP MENU / MENU]
to display the disc menu or pop-up
menu.
• If a 4-digit-language code appears in
the subtitle menu, refer to “Language
Code List” on page 61.
• If the disc has no subtitle language or
subtitle style, “Not Available” will be
displayed on the screen.
• During playback of the secondary
video, the primary subtitle setting is not
available except when there is no
subtitle for the secondary video.
• If you select a language that has a
3-letter-language code, the code will be
displayed every time you change the
subtitle language setting. If you select
any other languages, “---” will be
displayed instead. (Refer to page 61.)
• For DivX® external subtitle, refer to
“Playing Back DivX® with DivX® External
Subtitle” on page 28.
• You can also change the subtitle setting
from the option menu. Option menu
can be called up by pressing [OPTION]
on the unit.
Switching Audio Soundtrack
When playing back video material recorded
with 2 or more soundtracks (these are often
in different audio languages or audio
formats), you can switch them during
playback.
1 During playback, press [AUDIO].
2 Use [K / L] to select “Primary” or
“Secondary” audio to set, then
press [OK].
“Primary” : Sets the audio for the
primary video.
“Secondary” : Sets the audio for the
secondary video.
3 Use [K / L] to select your desired
audio stream channel.
• For “Secondary”, use [0 / 1] to switch
between current audio setting and “Off”.
4 Press [AUDIO] to exit.
1 During playback, press [AUDIO].
2 Use [K / L] to select your desired
audio stream channel.
/ 31 48k
e.g.) DVD-video
ENG Dolby D 3/2.1ch
• For audio CD, you can select the
following options.
“Stereo” : Both right and left channels
are active (stereo).
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
3 Press [AUDIO] to exit.