Operation Manual

46 EN
Category Menus / Options Description
Custom
Audio HDMI Audio
Out
• This setting
is available
only when
the TV is
connected
by an HDMI
cable.
HDMI
Multi(LPCM)
• The
multi-
channel
audio signals
are output
from HDMI
OUT jack
with LPCM.
Channel Level
• Tests or sets
the volume
for each
speaker.
Test Tone
• “Test
Tone” is
the test
tone
which
can be
output
from the
speakers
so you
can
adjust
the
volume
for each
speaker.
Off Select “Off” to
deactivate “Test Tone”.
Select “Manual”, then
press [OK] to manually
set the volume for the
desired speaker.
Select “Auto”, then
press [OK] to
automatically output
the test tone from each
speaker.
Manual
Auto
Front Lch
0dB to
-12dB
(Default
: 0dB)
If you have selected
“Manual” in “Test Tone”,
select the desired
speaker to set and
adjust the volume for
the selected speaker.
If you select “Auto” in
“Test Tone”, test tone
will automatically be
output in order. Adjust
the volume of the
speaker that outputs
the test tone.
Center
Subwoofer
Front Rch
Surround
Rch
Surround
Back Rch
Surround
Back Lch
Surround
Lch
Default Select “Default”, then
press [OK] to reset
“Channel Level” setting
to the default.
Delay Time
• This is a
parameter
for
optimizing
the timing at
which the
sound
outputs from
the speakers
according to
the distance
from the
listening
position.
Distance Feet Select the distance
from the listening
position
to the speaker to get
the ideal delay time.
Meters
Front 0m to
18m
(Default
: 3.6m)
Center
Surround 0m to
18m
(Default
: 3m)
Surround
Back
Default Select “Default”, then
press [OK] to reset
“Delay Time” setting to
the default.
Audio Mute Mutes the HDMI audio
signal.
DRC Auto Sets whether to
compress the range of
sound volume
(dynamic range
control) when Dolby
Digital, Dolby Digital
Plus or Dolby TrueHD
audio is played back.
On
Off