Operation Manual

17EN
LCD Control
You can adjust the pictures on the LCD
screen.
1 Press [LCD].
2 Use [K / L] to select the desired
setting.
“
“ (Brightness) :
Adjusts the brightness level of the picture.
(-7 to +7)
“ “ (Contrast) :
Adjusts the contrast level of the picture.
(-7 to +7)
“ “ (Sharpness) :
Adjusts the sharpness level of the picture.
(-7 to +7)
“ “ (Hue) :
Adjusts the hue (tint) level of the picture.
(-7 to +7)
“ “ (Saturation):
Adjusts the color saturation level of the
picture.
(-7 to +7)
“ “ (Monitor) :
Turns on (“ “) or off (“ “) the LCD
screen. If you select “
“, the LCD screen
will be turned off after 10 seconds. To
activate the setting immediately, press
[OPTION] on the unit or [LCD] on the
remote control.
3 Use [s / B] to change the setting.
4 Press [LCD] to exit.
Note
• You can also set the LCD settings in the
setup menu. (Refer to page 42.)
• “LCD Control” is also selectable in the
option menu. To call up the option
menu, press [OPTION] on the unit.
(Option menu will differ depending on
the status of
playback or playback
media / file.)
• Pressing [LCD] does not work while
setup menu is displayed or the unit is
outputting the picture from AV OUT
jack or HDMI OUT jack.
• To turn on the LCD screen when
“Monitor” is s
et to “Off”, press [AOPEN]
/ [OPTION] on the unit or [LCD] /
[C(stop)] / [SETUP] on the remote
control.
X6500UD_OM.indb 17X6500UD_OM.indb 17 2010/11/08 16:26:472010/11/08 16:26:47