Operation Manual

22 EN
Note
• Even if you set the media mode to “SD
Card” or “Network”, the setting will be
switched to “Disc” if you turn the unit
into the standby mode.
• If you call up the setup menu screen
while the media mode is set to
“Network”, the
setting will be switched
to “Disc”.
• “SD Card” can be selected only when an
SD Memory Card is inserted into the SD
card slot.
Playing Back a BD, DVD or a
Disc with AVCHD Files
1 Insert a disc (refer to “How to Insert
a Disc” on page 21).
2 Playback may start automatically.
If not, press [B (play)].
• Some discs may show a title or a disc
menu.
• For a disc with AVCHD files, title menu is
displayed.
In such case, refer to “Using the Title /
Disc / Pop-up Menu” on page 23.
To
pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop
mode.
Resume-On-Stop mode
If a playback is in Resume-On-Stop mode,
when you press [B (play)] next time, the
playback will start from the point where it
has been stopped.
Note
• Resume playback may not be available
for the BD that supports Java
applications (BD-Java).
• In the “Disc” mode, the resume
information will be cleared when;
- [C (stop)] is pressed wh
ile in the
Resume-On-Stop mode.
- the parental level is changed.
- the disc lid is opened.
- the AC adapter is disconnected or the
battery pack is detached.
• In the “SD Card” mode, the resume
information will be cleared when;
-
[C (stop)] is pressed while in the
Resume-On-Stop mode.
- the SD Memory Card is removed.
- the unit is turned into the standby
mode.
- the AC adapter is disconnected or the
battery pack is detached.
X6500UD_OM.indb 22X6500UD_OM.indb 22 2010/11/08 16:26:482010/11/08 16:26:48