Operation Manual

32EN
Using [the Number buttons] (Direct
Search)
Title search
In stop mode, enter the title number you
want to search using
[theNumberbuttons].
Playback of the title will start in a few
seconds.
Chapter search
During playback of a title, enter the
chapter number you want to search using
[the Number buttons].
Playback of the chapter will start in a few
seconds.
Track / file search
Enter the track / file number you want to
search using [the Number buttons].
Playback of the track / file will start in a
few seconds.
Note
• As for the BD-video, how it performs
will be strongly determined by the disc,
and may not perform as described here.
Switching Subtitles
Some video materials may have subtitles in 1
or more languages. For commercially
available discs, the supported languages can
be found on the disc case. Follow the steps
below to switch the subtitle language during
playback
.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select “Primary
Subtitle”, “Secondary Subtitle” or
“Subtitle Style”, then press [OK].
“Primary Subtitle” : Sets the subtitle
for the primary
video.
“Secondary Subtitle” : Sets the subtitle
for the secondary
video.
“Subtitle Style” : Sets style of the
subtitle.
3 Use [K / L] to select your desired
subtitle or style.
• Use [s / B] to switch between current
subtitle setting and “Off”.
4 Press [SUBTITLE] to exit.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select your desired
subtitle.
1 / 4
ENG
• Use [s / B] to switch between current
subtitle setting and “Off”.
3 Press [SUBTITLE] to exit.
Note
• Some discs will only allow you to
change the subtitles from the disc
menu or pop-up menu. Press
[TOPMENU] or [POPMENU/MENU]
to display the disc menu or pop-up
menu.
• If a 4-digit-
language code appears in
the subtitle menu, refer to “Language
Code List” on page 63.
• If the disc has no subtitle language or
subtitle style, “Not Available” will be
displayed on the screen.
• During playback of the s
econdary
video, the primary subtitle setting is not
available except when there is no
subtitle for the secondary video.
• If you select a language that has a
3-letter-language code, the code will be
displayed every time you chang
e the
subtitle language setting. If you select
any other languages, “---” will be
displayed instead. (Refer to page 63.)
• You can also change the subtitle setting
from the option menu. Option menu
can be called up by pressing
[OPTION]
on the unit.
X6500UD_OM.indb 32X6500UD_OM.indb 32 2010/11/08 16:26:492010/11/08 16:26:49