Operation Manual

33EN
S witching Audio Soundtrack
When playing back video material recorded
with 2 or more soundtracks (these are often
in different audio languages or audio
formats), you can switch them during
playback.
1 During playback, press [AUDIO].
2 Use [K / L] to select “Primary” or
“Secondary” audio to set, then
press [OK].
“Primary” : Sets the audio for the
primary video.
“Secondary” : Sets the audio for the
secondary video.
3 Use [K / L] to select your desired
audio stream channel.
• For “Secondary”, use [s / B] to switch
between current audio setting and “Off”.
4 Press [AUDIO] to exit.
1 During playback, press [AUDIO].
2 Use [K / L] to select your desired
audio stream channel.
/ 3
1
48k
e.g.) DVD-video
ENG Dolby D 3/2.1ch
• For audio CD, you can select the
following options.
“Stereo” : Both right and left channels
are active (stereo).
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
3 Press [AUDIO] to exit.
Note
• The secondary audio will not be output
when the secondary video is not
displayed or when “BD Audio Mode” is
set to “HD Audio Output”. (For some BD,
secondary audio will be output even
when secondary video is off.)
• The sound mode cannot be chang
ed
during playback of discs not recorded
in multiple audio.
• Some discs allow changing the audio
language setting on the disc menu.
(Operation varies depending on the
discs. Refer to the manual
accompanying the disc.)
• [AUDIO]
may not work on some discs
with multiple audio streams or
channels (e.g. DVDs that allow
changing audio setting on the disc
menu).
• If you select a language that has a
3-letter-language code, the code will be
displayed ev
ery time you change the
audio language setting. If you select
any other languages, “---” will be
displayed instead. (Refer to page 63.)
• Audio Language selection cannot be
made during rapid playback. (Refer to
page 28.)
• If 4-
digit-language code appears in the
audio menu, refer to page 63.
• If the disc has no audio language, “Not
Available” will be displayed on the
screen.
• For DTS-CD (5.1 music disc), selecting
audio streams or channels is not
available.
• Y
ou can also change the audio setting
from the option menu. Option menu
can be called up by pressing [OPTION]
on the unit.
X6500UD_OM.indb 33X6500UD_OM.indb 33 2010/11/08 16:26:492010/11/08 16:26:49