Operation Manual

43EN
Category Menus / Options Description
Custom
Video Progressive
Mode
Auto Sets the optimum progressive mode
for the image material.
“Auto”:
The progressive mode will detect
24-frame film material (movies) and
automatically select appropriate
progressive
mode.
“Video”:
Suited for playing back video material
discs (TV shows or animation).
Video
Still Mode Auto Adjusts picture resolution and quality
in still mode.
“Auto”:
Automatically selects the best
resolution setting (“
Frame” or “Field”)
based on the data characteristics of
the pictures.
“Field”:
Stabilizes the pictures, although the
picture quality may become coarse
due to the limited amount of data.
Select “Field” when the pictures are
still unstable even i
f “Auto” is selected.
“Frame”:
Displays relatively motionless pictures
in higher resolution. “Frame” improves
the picture quality, although it may
unstabilize the pictures due to
alternate output of 2-field data.
• An individual picture on the screen
i
s called “Frame”, which consists of
two separate images called “Field”.
Some pictures may be blurred at
the auto setting in “Still Mode”
setting due to their data
characteristics.
Field
Frame
Note for “HDMI Video Resolution”
• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a
DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output.
• Video and audio signals may be distorted temporarily when switching
to / from the
HDMI output mode.
• You cannot change the video resolution during Blu-ray Disc playback. To change the
resolution, stop playback.
• In order to get natural and high quality film reproduction of 24-frame film material, use
an
HDMI cable (High Speed HDMI Cable is recommended) and select “Auto” if the
connected TV is compatible with 1080p24 frame input.
• Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI
Video Resolution”
setting to “Auto”, when the contents of the disc are not compatible for
1080p24 frame, 1080p60 frame will be output.
• If the picture is not output properly to the TV because of “HDMI Video Resolution”
setting, press and hold [B
(play)] on the unit for more than 5 seconds. The setting will
be reset to the default automatically.
• With some copy-protected BD-video, the video image may only be output from HDMI
OUT jack.
• Refer also to your TV’s manual.
X6500UD_OM.indb 43X6500UD_OM.indb 43 2010/11/08 16:26:502010/11/08 16:26:50