T4214.QX33 01.2.21 7:38 PM Page 1 OWNER’S MANUAL 9-INCH COLOR TV/VCR SRC2109D This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-968-3429.
T4214.QX33 01.2.21 7:38 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T4214.QX33 01.2.21 7:38 PM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T4214.QX33 01.2.21 7:38 PM Page 4 PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit.
T4214.QX33 01.2.21 7:38 PM Page 5 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6 C OPERATING CONTROLS AND FUNCTIONS 7 C PREPARATION FOR USE . . . . . . . . . . . . . . . .9 ANTENNA/CABLE CONNECTIONS . . . . . . .9 INSTALLING THE BATTERIES EXTERNAL INPUT MODE MOBILE CONNECTION C RECORDING . . . . . . . .
T4214.QX33 01.2.21 7:38 PM Page 6 FEATURES • Infrared remote control • Dew Sensor–Indicates that moisture condensation may • Still–“Freeze” the picture at any time, for close viewing • Bilingual on screen menu display selectable in • occur inside the TV/VCR. • English or Spanish Real time counter–This shows the elapsed recording or • playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
T4214.QX33 01.2.21 7:38 PM Page 7 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - POWER AUDIO STOP/EJECT REW PLAY F.FWD REC/OTR VOLUME VIDEO CHANNEL EARPHONE REC 1 2 3 4 5 6 7 8 9 10 - REMOTE CONTROL - 25 WAKE-UP /SLEEP POWER 5 15 16 17 7 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.FWD 6 24 12 11 23 8 9 STOP 6 10 18 EJECT RECORD T-PROG.
T4214.QX33 01.2.21 7:38 PM Page 8 - REAR VIEW - 27 DC 13.2V AC 120V 28 ANT 26 10 REC button– Press for manual recording. OTR button– Activates One Touch Recording. (only on the TV/VCR) 11 VOLUME X / Y buttons– Adjust the volume level. 12 CHANNEL K / L buttons– Press to select the desired channels for viewing or recording. You may display the main menu on the TV screen by pressing repeatedly this button on the TV/VCR.
T4214.QX33 01.2.21 7:38 PM Page 9 PREPARATION FOR USE From Cable System or Satellite Dish Satellite Box or OUT Cable Box IN (Not supplied) Dipole Antenna (Supplied) VHF/UHF Antenna (Not supplied) Flat twin-lead cable VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or DC 13.2V AC 120V ANT VHF/UHF or Combiner (Not supplied) 75-ohm Coaxial Cable (Not supplied) ANT.
T4214.QX33 01.2.21 7:38 PM Page 10 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX MOBILE CONNECTION WARNING: The driver should never watch the TV/VCR while operating a motor vehicle. If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in drawing. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box.
T4214.QX33 01.2.21 7:38 PM Page 11 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
T4214.QX33 01.2.21 7:38 PM Page 12 NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.
T4214.QX33 01.2.21 7:38 PM Page 13 5 Select the year Press the PLAY/K or STOP/L button until your desired year appears. (Example: 2001) Then, press the F.FWD/B button. 6 Select the hour Press the PLAY/K or STOP/L button until your desired hour appears. (Example: 5, PM) Then, press the F.FWD/B button. 7 Select the minute Press the PLAY/K or STOP/L button until the desired minute appears. (Example: 40) 8 CHANNEL SET UP AGAIN – MANUAL CLOCK SET – MONTH DAY 05 / 01 HOUR YEAR TUE 2001 Make sure ..
T4214.QX33 01.2.21 7:38 PM Page 14 4 DAYLIGHT-SAVING TIME Delete (or add) it from (into) memory Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory. • To delete another channel, repeat steps [3] and [4]. • If you press the F.FWD/B or REW/s button again, the channel is memorized again. Added channel: Light blue. Deleted channel: Light red. 5 Exit the channel setup mode Press the MENU button on the remote control to returns to TV mode.
T4214.QX33 01.2.21 7:38 PM Page 15 TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
T4214.QX33 01.2.21 7:38 PM Page 16 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
T4214.QX33 01.2.21 7:38 PM Page 17 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the TV/VCR will now search in super high speed (in the LP / SLP modes only).
T4214.QX33 01.2.21 7:38 PM Page 18 NOISE CANCEL (in the Still mode) This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode.
T4214.QX33 01.2.21 7:38 PM Page 19 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is being recorded.
T4214.QX33 01.2.21 7:38 PM Page 20 3 Begin OTR Avoid overlap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with the earliest start time will record first. • Once the earliest program finishes recording, the overlapping programs will record in the order of the program number. • The illustration below demonstrates the sequence of recording. OTR(2 : 30) Press the REC/OTR button on the TV/VCR as many times as needed.
T4214.QX33 01.2.21 7:38 PM Page 21 For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button.
T4214.QX33 01.2.21 7:38 PM Page 22 TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2]under TIMER RECORDING, page 20, and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR.
T4214.QX33 01.2.21 7:38 PM Page 23 3 SLEEP TIMER Set wake up time Press the PLAY/K or STOP/L button until it points to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes. WAKE UP TIMER ON/OFF TV/TAPE B TIME [ON] [TV] [12:00AM] The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode.
T4214.QX33 01.2.21 7:38 PM Page 24 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain. To clear them, press the DISPLAY button.
T4214.QX33 01.2.21 7:38 PM Page 25 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No picture but the audio is OK in playback. CORRECTIVE ACTION Make sure the AC cord is connected to an AC outlet. • • Make sure the car battery cord is connected to vehicle’s cigarette lighter socket and to DC 13.
T4214.QX33 01.2.21 7:38 PM Page 26 SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : 9 inch in-line gun, 90˚ deflection tube NTSC-M Rotary two-head 1/2 inch Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 33.40mm/sec. 16.67mm/sec. 11.12mm/sec.
T4214ES.QX33 01.2.21 6:38 PM Page 27 INDICE CONTROLES DE OPERACIÓN Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .27 MODO DE ENTRADA EXTERNA . . . . . . . . . . .30 CONEXIONES DE ANTENA/CABLE . . . . . . . .29 PREPARACIÓN DE CANALES POR PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . . . .31 INSTALACIÓN DE LAS PILAS . . . . . . . . . . . . .30 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .
T4214ES.QX33 01.2.21 6:38 PM Page 28 - PANEL TRASERO - 27 DC 13.2V AC 120V 28 ANT 26 8 Botón de reproducción (PLAY)– Púlselo para iniciar la reproducción. Botón K– Púlselo para seleccionar los modos de ajuste desde el menúde la pantalla. Púlselo para introducir dígitos cuando establezca un programa. (Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador) 9 Botón de avance rápido (F.
T4214ES.QX33 01.2.21 6:38 PM Page 29 CONEXIONES DE ANTENA/CABLE Desde el cable coaxial o caja de emisiones vía satélite de 75 ohm del sistema de Cable Caja de CATV o caja de emisiones vía satélite (no incluído) OUT Antena Dipolar IN Antena combinada de VHF/UHF (no incluído) Antena VHF (no incluído) o Desde el sistema de Cable DC 13.2V AC 120V Antena UHF (no incluído) ANT Combinador de o VHF/UHF (no incluído) Cable coaxial de 75 ohm (no incluído) ANT. o o CONEXION DE LA ANTENA BIPOLAR 1.
T4214ES.QX33 01.2.21 6:38 PM Page 30 CONEXION MOVIL INSTALACIÓN DE LAS PILAS 1) Abra la tapa del compartimiento de las pilas del mando a distancia presionándola en el sentido de la flecha. 2) Inserte 2 pilas tamaño “AA” en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-). 3) Vuelva a poner la tapa. ADVERTENCIA: El conductor nunca debe ver programas del televisor o del videobgrabadora mientras está conduciendo un vehículo.
T4214ES.QX33 01.2.21 6:38 PM Page 31 PREPARACIÓN DE CANALES POR PRIMERA VEZ AJUSTE DEL RELOJ 1) Conecte el extremo más prqueño del cordón de CA al conector de CA de 120V en la parte posterior de la TV/VCR. Luego, enchufe el otro extremo enun tomacorriente normal de CA. NOTAS: Dede desconectar de la TV/VCR el cordón para la batería del automóvil antes de usar la alimentación de CA. Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.
Get it fixed, at your home or ours! For repair of major brand appliances in your own home… no matter who made it, no matter who sold it! 1-800-4-MY-HOME SM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.
