OWNER’S MANUAL 13-INCH COLOR TV/VCR SRC21135 AUDIO VIDEO This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6 C OPERATING CONTROLS AND FUNCTIONS 7 C PREPARATION FOR USE . . . . . . . . . . . . . . . .9 ANTENNA/CABLE CONNECTIONS . . . . . . .9 MOBILE CONNECTION . . . . . . . . . . . . . . . .10 EXTERNAL INPUT MODE . . . . . . . . . . . . . .
FEATURES • Rotary 4-head Record/Playback System–Four • • • Auto Head Cleaner–Automatically cleans video heads ensure excellent picture quality and special effects playback. Index Search–Fast-forwards to start of next recording. Slow Motion–View recorded program at slower than normal speed. heads as you insert or remove a cassette. • Zero Return–The tape returns to counter of 0:00:00 by rewinding or fast forwarding.
OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - AUDIO 1 2 VIDEO STOP/EJECT 3 4 REW 5 PLAY 6 F.FWD 7 - REMOTE CONTROL - 25 WAKE-UP /SLEEP POWER 13 15 16 17 5 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.FWD 4 24 11 12 23 6 7 STOP 4 8 18 EJECT RECORD T-PROG. CLEAR COUNTER RESET SPEED PAUSE/STILL GAME SLOW 22 21 1 EARPHONE jack– Connects to earphones (not supplied) for personal listening.
- REAR VIEW -* DC 13.2V AC 120V ANT. 26 27 8 REC button– Press for manual recording. OTR button– Activates One Touch Recording. (only on the TV/VCR) 9 RECORD indicator– Flashes during recording. Lights up in the Stand-by mode for Timer Recording. 10 Remote Sensor Window– Receives the infrared signals from the remote control. 11 CHANNEL K / L buttons– Press to select the desired channels for viewing or recording, listening of FM radio.
PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or OUT Cable Box (Not supplied) From Cable System or Satellite Dish IN VHF/UHF Antenna (Not supplied) Rod Antenna (Supplied) VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or DC 13.2V AC 120V ANT. or 75-ohm Coaxial Cable (Not supplied) or VHF/UHF Combiner (Not supplied) ANT. or Flat twin-lead cable VHF/UHF COMBINED ANTENNA VHF/UHF SEPARATE ANTENNAS The VHF/UHF Rod Antenna (supplied) is detachable.
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1) Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Example: CH3) 2) Select the channel to record from your Cable Converter Box or Satellite Box.
SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 1 –MENU– TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button.
NOTE: When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock. 1 TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps [1] and [2]. 2)Select where you want to change using the F.FWD/B or REW/s button. 3)Enter correct numbers using the PLAY/K or STOP/L button. 4)Press the MENU button on the remote control to start the clock.
2 1 Select “ENGLISH” or “ESPAÑOL” Select “ENGLISH” or “ESPAÑOL”= Spanish using the F.FWD/B or REW/s button. 3 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. Exit the Language mode Press the MENU button on the remote control to return to TV mode.
DEGAUSSING Magnetism from nearby appliances might affect the color of the TV picture. If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes. PICTURE CONTROL The TV/VCR’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
TO CANCEL THE CLOSED CAPTION SYSTEM 3 Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Press the MENU button on the remote control to return to TV mode. B TV–Y TV–Y7 ( TV–G TV–PG ( TV–14 ( TV–MA ( ) ) ) ) The On-Screen Display will disappear after 5 seconds.
4 3 Exit the V-Chip setting mode Press the MENU button on the remote control to return to original mode. MPAA RATING SET UP Selection G PG PG-13 R Make sure ... • TV/VCR power must be turned on. 1 Select “V-CHIP SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “V-CHIP SET UP”. Then, press the F.FWD/B button. 2 Select “MPAA RATING” Press the PLAY/K or STOP/L button to point to “MPAA RATING”. Then, press the F.FWD/B button.
3 SEARCH To stop playback STOP Press the STOP button when playback is completed. PICTURE SEARCH AUTO REPEAT PLAYBACK The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part of more than 10 seconds. 1 2 ZERO RETURN Select “USER’S SET UP” Press the MENU button on the remote control.
NOTES: • Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction. 1 Insert a tape. 2 Select “TIME SEARCH” mode Enter your desired time TIME SEARCH 2 : 50 Press the PLAY/K or STOP/L button until your desired time appears.
VERTICAL HOLD CONTROL TRACKING ADJUSTMENT In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, see Tracking Adjustment section. STILL PICTURE You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.
OTR (One Touch Recording) This function enables you to set the recording length simply by pressing the REC/OTR button on the VCR. 1)Begin OTR by pressing the REC/OTR button on the VCR repeatedly until the desired recording length appears. Recording stops when 0:00 is reached. NOTES: • This function CANNOT be done from the remote control. • To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.
For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) – TIMER PROGRAMMING – CH DATE 10 BEGIN END - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 EVRY DAY -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -:- -:- -:- -:- -:- -:- -:- -:- - - - Press the F.FWD/B or REW/s button. The program is now completed. • To set another program, repeat steps [2] to [10].
TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORDING, page 21, and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off.
2 SLEEP TIMER Select “TV” or “TAPE” Press the PLAY/K or STOP/L button until it points to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. 3 WAKE UP ON/OFF TIMER B TV/TAPE TIME [ON] [TV] [12:00AM] The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode. Set wake up time 1 Press the PLAY/K or STOP/L button until it points to “TIME”. Press the F.
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible. Cannot go into Record mode. Playback picture is partially noisy. No picture but the audio is OK in playback.
SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
INDICE CONTROLES DE OPERACIÓN Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .28 INSTALACIÓN DE LAS PILAS . . . . . . . . . . . . .31 CONEXIONES DE ANTENA/CABLE . . . . . . . .30 PREPARACIÓN DE CANALES POR PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . . . .31 MODO DE ENTRADA EXTERNA . . . . . . . . . . .31 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .31 CONTROLES DE OPERACIÓN Y SUS FUNCIONES NOTA: No recomendamos utilizar mandos a distancia universales.
- PANEL TRASERO DC 13.2V AC 120V ANT. 26 27 • Púlselo para introducir dígitos cuando establezca un programa. (Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador) 7 Botón de avance rápido (F.FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción.
CONEXIONES DE ANTENA/CABLE Caja de CATV o caja de emisiones vía satélite (no incluído) OUT Desde el cable coaxial o caja de emisiones vía satélite de 75 ohm del sistema de Cable Antena de varilla UHF/VHF (incluído) IN Antena combinada de VHF/UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable o Antena UHF (no incluído) DC 13.2V AC 120V ANT. Combinador de o VHF/UHF (no incluído) ANT.
de introducir completamente el enchufe del cordón de • Asegúrese la batería del automóvil en el zócalo del encendedor de cigarrillos. desenchufe primero del zócalo del encendedor de ciga• Siempre rrillos el cordón para la batería del coche, antes de desconectarlo de la TV/VCR. de usar la alimentación de CA, usted debe desconectar de • Antes la TV/VCR el cordón para la batería del atuomóvil. reemplace un fusible por otro del mismo tipo 5A, • Solamente 250V.
