Recordable disc DVD Recorder TOLL FREE : 1-800-518-1180 or visit our web site at http://www.funai-corp.com Connection to a TV (Before you use this unit, you need to complete connections.) (Back of This Unit) COMPONENT VIDEO OUTPUT VIDEO IN IN S-VIDEO L IN VIDEO OUT Y OUT L OUT PB/CB R R PR/CR ANTENNA AUDIO IN (E1) 1 RF cable (supplied) AC 120V ANT IN AUDIO OUT 5 (Back of TV) Set channel 3 or 4.
Before you start Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before you start IMPORTANT SAFEGUARDS NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.
Before you start Precautions (cont’d) Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Before you start Before you start Precautions (cont’d) Maintenance CLEANING THE CABINET • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. Recording CLEANING THE DISC LENS • If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty.
Before you start Table of contents Before you start . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safeguards . . . . . . . . . . . . . . . . . . . . . . 3 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbols used in this Owner’s Manual . . . . . . . . . 7 Functional overview. . . . . . . . . . . . . . . . . . . . . . . .
Before you start Before you start Features This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Others Progressive Scan system Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.
Before you start Functional overview Front Panel 2* 3 4 5 6 7* 8 1 *The unit can also be turned on by pressing this button. 13 12 11 10 9 14 1. 2. 3. 4. 5. Disc tray Place a disc when opening the disc tray. OPEN/CLOSE A button* Press to open or close the disc tray. CHANNEL L / K buttons Press to change the channel up and down. PREV E button During playback, press to return to the beginning of the current chapter or track. During playback, press and hold for 1.5 seconds to fast reverse.
Before you start Before you start Functional overview (cont’d) 1 2 Rear Panel 3 VIDEO IN IN COMPONENT VIDEO OUTPUT S-VIDEO L OUT IN 4 VIDEO OUT Y DIGITAL AUDIO OUTPUT PCM / BITSTREAM OUT L PB/CB R ANTENNA AUDIO IN R PR/CR (E1) 10 9 8 7 6 5 Getting started Recording Playing discs 7. COMPONENT VIDEO OUTPUT jacks 1. ANTENNA IN jack Use to connect an antenna. Use to connect a TV monitor with component 2. VIDEO IN jack (EXT1) video inputs with a component video cable. 8.
Before you start Functional overview (cont’d) Remote Control 1 OPEN/CLOSE STANDBY-ON ZOOM TIMER PROG. ABC DEF 2 14* .@/: 3 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 DISPLAY SPACE CLEAR SETUP TITLE DISC MENU RETURN OK 4 6 CH 15 REPEAT 16 17 0 5 7 8 9 13 19 REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP 10 11 12 20 21* 22 23 REC 18 25 26 24 (*) The unit can also be turned on by pressing this button. 1.
Before you start Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit. • Remote control for different devices can interfere with each other.
Before you start Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu. Then using [K / L], select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup 1 2 3 4 5 6 7 Disc Edit Playback Display Recording Clock Channel 1 2 3 4 3 Edit Disc Name Disc Protect OFF ON Erase Disc Make Edits Compatible Disc Edit 1.Required Settings: To set up the required settings. 2.
Connections Before you start Connection to a TV Antenna Cable TV signal Antenna Cable TV signal (Back of TV) VIDEO AUDIO IN (Back of TV) or or 5 Connect Video cable (supplied) Connect Audio cable (supplied) COMPONENT VIDEO OUTPUT VIDEO IN IN L DIGITAL AUDIO OUTPUT PCM / BITSTREAM PB/CB Connect Disconnect VIDEO OUT L OUT Plug in the AC power cord of this unit.
Connections Connection to a cable box or satellite box (Back of TV) VIDEO 2 Cable TV signal (Cable box or Satellite box) IN Connect RF cable (supplied) AUDIO IN 3 4 Connect Video cable (supplied) Connect Audio cable (supplied) OUT VIDEO IN IN RF cable 1 (Commercially available) Connect COMPONENT VIDEO OUTPUT S-VIDEO L OUT IN Y OUT L DIGITAL AUDIO OUTPUT PCM / BITSTREAM PB/CB R ANTENNA AUDIO IN (E1) R PR/CR AUDIO OUT COAXIAL (Back of this unit) With this setup: • You can record any u
Connections Before you start Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information.
Getting started Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit with the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. Step 2: Turn on the unit. Remote Control OPEN/CLOSE STANDBY-ON ZOOM .
Getting started Before you start Easy DVD recording (cont’d) Step 5: Select the desired channel. ABC REV PLAY FWD PREV PAUSE NEXT STOP CM SKIP REC TIMER PROG. DEF 1 2 3 GHI JKL MNO 4 5 6 TUV REC MODE RAPID PLAY Connections ZOOM PQRS Step 7: Stop the recording. OPEN/CLOSE STANDBY-ON .@/: Step 6: Record on DVD disc. WXYZ 8 9 SPACE CLEAR REV PLAY FWD PREV PAUSE NEXT STOP CM SKIP REPEAT REC SETUP Getting started 7 DISPLAY REC MODE RAPID PLAY CH 0 .
Getting started Initial setting Turn on this unit for the first time, you need to follow these steps. 1 Press [STANDBY-ON]. 2 Turn the TV on. Select the input 3 Using [K / L], select your desired language on screen menu. Then press [OK] to set language. “Channel Preset” will automatically appear. 1 ZOOM .
Getting started To select a channel Note Adding/deleting channels Select the channel number to add or delete. Press [{] or [CH L] to move to a lower channel number. Press [B] or [CH K] to move to a higher channel number. Press the Number buttons to select a channel number directly. OPEN/CLOSE STANDBY-ON 4 ZOOM TIMER PROG. .
Getting started Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. 1 3 Using [K / L], select “TV Audio Select”. Press [OK]. Option window will appear. OPEN/CLOSE STANDBY-ON ZOOM TIMER PROG. .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 Press [SETUP]. TV Audio Select 2 Stereo SAP Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear.
Getting started Before you start Setting the clock Auto Clock Setting • If you do not know your PBS channel number: Using [K / L], select “Auto”. Press [OK]. The setting will be activated. 6 4 • If you know your PBS channel number: Using [K / L], select “Manual”. Press [OK]. Auto Clock Setting - Manual Set Channel No. CH 1 1 OPEN/CLOSE STANDBY-ON ZOOM TIMER PROG. .
Getting started Setting the clock (cont’d) Manual Clock Setting 1 Press [SETUP]. 4 Using [K / L], enter the date (month / day / year). Press [{ / B] to move the cursor. 2 Clock Setting Using [K / L], select “Clock”. Press [OK]. 3 Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. ---- / -- / ---- ( ---- ) -- : -- -- ZOOM TIMER PROG. .
Getting started Before you start Setting the clock (cont’d) Setting the Daylight Saving Time 3 Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Clock menu will appear. .@/: OFF ABC TIMER PROG. DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS ON TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP DISC MENU RETURN OK REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP CLEAR SETUP RETURN OK 0 TITLE Using [K / L], select “ON” or “OFF”. Press [OK].
Recording Information on DVD recording Information Recording mode This unit can record to DVD+RW, DVD-RW, DVD+R and DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. This unit will record DVD+VR mode automatically. DVD-RW/DVD-R disc will be recorded in the DVD+VR mode automatically in this unit. You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.
Recording Making discs playable in other DVD player (Finalize/Make Edits Compatible) DVD+RW Make Edits Compatible* Editing titles Getting started DVD-RW/DVD-R DVD+R Finalizing* Playable DVD player Recording This Unit Connections After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to page 36.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on other units after editing.
Recording Before recording Replacing disc menu +VR DVD+ DVD+RW DVD+R DVD-RW DVD- +VR DVD-R It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units. “OFF” has been selected as the default. OPEN/CLOSE STANDBY-ON ZOOM TIMER PROG. .@/: ABC DEF 1 2 3 GHI JKL MNO Option window will appear.
Recording +VR +VR DVD-RW DVD- DVD-R Follow the steps below to record TV programs. 7 DVD+ DVD+RW DVD+R Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press [PAUSE F] to pause recording. Press [PAUSE F] or [REC] again to restart recording. .@/: ZOOM TIMER PROG.
Recording One-touch Timer Recording +VR DVD+ DVD+RW DVD+R DVD-RW DVD- This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode. +VR DVD-R 4 Press [REC] repeatedly to select desired recording time. Recording times appear on the TV screen (30 minutes to 6 hours). Recording will start. OPEN/CLOSE STANDBY-ON 1 3 .
Recording Before you start Timer Recording +VR DVD+ DVD+RW DVD-RW DVD- DVD+R 5 Using [K / L], select the CH number to record. Press [B]. Date 2. 1 8 Timer Programming Start 1. JAN/01 12:57AM End CH 1:57AM CH 8 Mode --- ZOOM .@/: 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 1. --- 2. --- 3. --- Start End CH Mode To record from external input, select E1 or E2. Using [K / L], select a recording mode. Timer Programming 2 Date Start End 1.
Recording Timer Recording (cont’d) Checking, canceling, or correcting the timer programming information 1 4 Press [STANDBY-ON]. TIMER REC indicator will be off on the front panel. To clear the timer programming: Using [K / L], select the program. Press [CLEAR]. 2 To correct the timer programming: Using [K / L], select your desired program. Press [OK]. Next, correct the timer programming by using [K / L / { / B]. Finally, press [OK] again. Press [TIMER PROG.]. Timer Programming Date Start 1.
Recording Hints for Timer Recording Recording This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority. A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary. PROG. A PROG. B PROG.
Recording Overwriting an existing title Overwriting from the beginning of the title 4 +VR DVD+ DVD+RW DVD-RW DVD- You can overwrite the existing title from the beginning. 1 ZOOM TIMER PROG. .@/: ABC DEF 1 2 3 GHI 1 Press [STANDBY-ON]. Make sure that the TV input is set on the unit. 2 Load the disc that includes a title to be overwritten. Title list will appear. If the title list does not appear, press [DISC MENU]. OPEN/CLOSE STANDBY-ON Using [K / L], select a title to be overwritten.
Recording Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. Before you start Overwriting an existing title (cont’d) Connections When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A Existing Title (B) Getting started Title name: B After overwriting PROG.
Recording Settings for an external source Connection to an external source +VR DVD+ DVD+RW +VR DVD-RW DVD- DVD+R DVD-R Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Another source (VCR camcorder etc.
Recording Before you start Settings for an external source (cont’d) Recording from an external source +VR DVD+ DVD+RW DVD+R DVD-RW DVD- +VR DVD-R OPEN/CLOSE STANDBY-ON 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 13. 1 .@/: 4 2. Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly. ZOOM TIMER PROG.
Recording Playing the discs in other DVD players Finalizing a disc +VR DVD+R DVD-RW DVD- +VR DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Details are on page 25. To cancel finalizing...
Recording Before you start Playing the discs in other DVD players (cont’d) Auto finalizing +VR DVD+R DVD-RW DVD- +VR DVD-R ZOOM .@/: Auto Finalize - Disc Full 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 Using [K / L], select “Recording”. Press [OK]. Recording menu will appear. OFF ON 5 Using [K / L], select “Auto Finalize”. Press [OK]. Auto Finalize menu will appear.
Playing discs Information on DVD play Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit. Other disc types are not guaranteed to play. Disc Logo DVD-VIDEO in the NTSC system. You cannot play DVDs recorded in other color system .
Playing discs Playback +VR DVD+ DVD+RW DVD+R DVD-RW DVD- +VR DVD-R Pop-up window will appear. 1 Play Edit Overwrite 1 SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 EMPTY TITLE 1:37:52 SP(2Hr) REPEAT 8 9 SPACE CLEAR SETUP RETURN OK 0 4 5 6 TITLE DISC MENU REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP REC 4 7 When inserting disc.
Playing discs Basic playback (cont’d) DVD-R DVD-RW DVD- CD Video CD 1 4 Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press [PLAY B] to start playback. Playback will start. 2 Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. 3 Insert your disc with its label facing up. Align the disc to the disc tray guide. If you are playing a DVD-Video disc or Video CD with PBC function, a menu may appear.
Playing discs Before you start Basic playback (cont’d) Playing discs using the disc menu DVD-V OPEN/CLOSE STANDBY-ON Continue this step to set up all the features you want or to start playing the disc from the menu. 1 Press [DISC MENU]. Disc menu will appear. If the feature is not available, may appear on the TV screen. Press [DISC MENU] to exit the disc menu. Using [K / L / { / B], select an item. Press [OK] to confirm. .
Playing discs Special playback Resume play +VR DL DVD-V DVD+ DVD+RW Video Video DVD-RW DVD- DVD+R CD DVD-R DVD-RW DVD- DVD+R Video CD DVD-R 1 During playback, press [STOP C]. The resume message will appear. MP3 To cancel the resume play and start playing the disc from the beginning, press [STOP C] the second time while the play is stopped. Resume ON 2 Press [PLAY B].
Playing discs Before you start Special playback (cont’d) Rapid play PQRS +VR DL DVD-V DVD+ DVD+RW Video Video DVD-RW DVD- DVD+R DVD-RW DVD- DVD+R +VR DVD-R TUV WXYZ REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP RETURN OK 0 DVD-R B : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback. B During playback, press [RAPID PLAY]. : Press [RAPID PLAY] three times to play back in normal speed. No effects.
Playing discs Special playback (cont’d) Zoom +VR DL DVD-V DVD+ DVD+RW Video Video DVD-RW DVD- DVD-R DVD+R DVD-RW DVD- DVD+R +VR DVD-R 1 Video CD ZOOM TIMER PROG. .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS 1 3 During playback, press [DISPLAY] or [ZOOM]. Display menu will appear. Using [K / L], select a desired zoom factor to zoom. Press [OK]. The zoom area will be displayed.
Playing discs Before you start Search Title/Chapter search .@/: +VR DL DVD-V DVD+ DVD+RW Video Video DVD-RW DVD- DVD+R DVD+R DVD-RW DVD- +VR DVD-R 3 MNO 4 5 6 TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP RETURN OK Connections Using [PREV H] / [NEXT G] DEF 2 JKL PQRS DVD-R ABC 1 GHI 0 TITLE DISC MENU 1 To go back to the beginning of the current title or chapter, press [PREV H]. Press it repeatedly to go to the previous title or chapter.
Playing discs Search (cont’d) Track search CD Video CD MP3 Using [PREV H] / [NEXT G] 1 During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track. The track will move backward one at a time. 1 REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP REC ZOOM Using [DISPLAY] .
Playing discs Before you start Repeat/Random/Program playback Repeat playback DL DVD-V DVD+ DVD+RW Video Video DVD-RW DVD- DVD+R DVD+R +VR DVD-RW DVD- +VR DVD-R ZOOM CD DVD-R Video CD 3 During playback, press [DISPLAY] or [REPEAT]. Display menu will appear. Using [K / L], select a desired option to repeat. Press [OK]. The selected repeat play will start. 0:00:00 DVD-Video Using [{ / B], select . Press [OK]. Repeat menu will appear.
Playing discs Repeat/Random/Program playback (cont’d) Program playback CD Video CD PQRS TUV WXYZ 7 8 9 DISPLAY SPACE CLEAR SETUP RETURN OK REPEAT 0 You can program the disc to play in your desired order. 1 Press [SETUP]. TITLE 4 Using [K / L], select a desired track. Press [OK] or [B]. A cursor will move to next. Program Play 2 Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear.
Playing discs Before you start Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V CD Video CD 0:00:00 Audio CD 1.L/R 2.L 3.R 1 .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR SETUP RETURN OK 0 TITLE When inserting disc. Audio soundtrack will switch. 2 3 4 DISC MENU REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP REC Using [{ / B], select . Press [OK]. Audio menu will appear.
Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V OPEN/CLOSE STANDBY-ON Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes. 2 Using [{ / B], select . Press [OK]. Angle will switch each time you press [OK]. 1 1 ZOOM TIMER PROG. .
Editing Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original.
Editing Editing discs Deleting titles +VR DVD+ DVD+RW DVD+R DVD-RW DVD- You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to record on will be increased. For DVD+R and DVD-R disc, the disc space to record on will not be changed. +VR DVD-R ZOOM 4 .@/: Using [K / L], select “Title Delete”. Press [OK].
Editing Before you start Editing discs (cont’d) Putting names on titles +VR DVD+ DVD+RW DVD+R DVD-RW DVD- +VR DVD-R OPEN/CLOSE STANDBY-ON ZOOM Using [K / L], select “Yes”. Press [OK]. The name you entered will be activated for the title. .@/: 3 Edit Title Name ABC TIMER PROG. DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ Connections You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list.
Editing Editing discs (cont’d) Setting chapter marks GHI +VR DVD+ DVD+RW DVD-RW DVD- DVD+R You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. 1 Follow steps 1 to 3 in “Deleting titles” on page 52 to display the Edit menu. 2 +VR DVD-R • It is convenient to use [PREV H],[NEXT G], [REV E] and [FWD D] for finding the point at which a new chapter mark is to be added.
Editing Before you start Editing discs (cont’d) Clearing chapter marks (cont’d) GHI 6 Press [RETURN ] twice to exit. Data will be written onto the disc momentarily. JKL MNO 4 5 6 PQRS TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP DISC MENU RETURN OK REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP 0 Connections TITLE 6 This operation may take a while to be completed.
Editing Editing discs (cont’d) Hiding chapters +VR DVD+ DVD+RW DVD+R DVD-RW DVD- You can hide chapters from the title list. Hidden chapters are skipped during playback. 1 Follow steps 1 to 3 in “Deleting titles” on page 52 to display the Edit menu. 2 Using [K / L]], select “Current Chapter”. Press [OK]. Option window will appear. Current Chapter 1 Visible Hidden Chapter 2/ 2 Visible +VR DVD-R OPEN/CLOSE STANDBY-ON ZOOM 5 .
Editing Before you start Editing discs (cont’d) Setting pictures for thumbnails +VR DVD+ DVD+RW DVD+R DVD-RW DVD- +VR DVD-R Press [RETURN ] to exit. Data will be written onto the disc momentarily. 3 MNO 4 5 6 TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP RETURN OK 0 TITLE DISC MENU 5 This operation may take a while to be completed.
Editing Editing discs (cont’d) Dividing a title 4 +VR DVD+ DVD+RW DVD-RW DVD- You can divide one title into two new titles. 1 Follow steps 1 to 3 in “Deleting titles”on page 52 to display the Edit menu. 2 Use [PREV H], [NEXT G], [REV E], [FWD D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title. OPEN/CLOSE STANDBY-ON Using [K / L], select “Yes”. Press [OK]. The title will be divided into two new titles.
Editing Before you start Editing discs (Setup menu) Putting name on disc +VR DVD+ DVD+RW DVD+R DVD-RW DVD- Press [STOP C] if you are playing a disc. OPEN/CLOSE STANDBY-ON ZOOM 3 .@/: Using [K / L], select “Edit Disc Name”. Press [OK]. A window for entering a title name will appear. ABC TIMER PROG. DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP RETURN OK 0 Edit Disc Name DISC MENU A B C a b c No Disc Name 1 2 3 Press [SETUP].
Editing Editing discs (Setup menu) (cont’d) Setting or releasing disc protect +VR DVD+ DVD+RW DVD+R DVD-RW DVD- To prevent accidental editing, or erasing the titles, you can protect them. 1 +VR DVD-R ZOOM 2 .@/: Using [K / L]], select “Disc Protect OFF ON”. Press [OK]. Confirmation window will appear. Disc Protect OFF Follow steps 1 to 2 in “Putting name on disc” on page 59 to display the Disc Edit menu. OPEN/CLOSE STANDBY-ON ON ABC TIMER PROG.
Editing Before you start Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont’d) 2 1 Using [K / L]], select “Disc Protect ON OFF”. Press [OK]. Confirmation window will appear. Follow steps 1 to 2 in “Putting name on disc” on page 59 to display the Disc Edit menu. Disc Protect ON When inserting disc. OPEN/CLOSE STANDBY-ON OFF ZOOM .@/: ABC TIMER PROG.
Editing Editing discs (Setup menu) (cont’d) Erasing disc +VR DVD+ DVD+RW DVD-RW DVD- Video DVD-RW DVD- You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc it will be recorded to DVD+VR automatically. 2 Using [K / L]], select “Erase Disc”. Press [OK]. Confirmation window will appear. Disc Edit Disc Protect OFF ON Erase Disc Make Edits Compatible TIMER PROG. .
Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) English French Spanish Set the language for disc menu. Audio Language Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. English Français Español Set the language for OSD (On Screen Display).
Changing the Setup menu Language setting Press [STOP C] if you are playing a disc. OPEN/CLOSE STANDBY-ON 1 Press [SETUP]. 2 Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. ZOOM TIMER PROG. .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ CH REPEAT 7 8 9 DISPLAY SPACE CLEAR SETUP TITLE DISC MENU RETURN OK REC MODE REV PLAY FWD RAPID PLAY PREV PAUSE NEXT STOP CM SKIP 0 3 Using [K / L], select “Language”. Press [OK].
Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Note Language - Subtitle • When you finish entering the code, press [OK]. Refer to the language code table on page 74. Code Input - - - - PQRS TUV WXYZ 7 8 9 DISPLAY SPACE CLEAR SETUP DISC MENU RETURN OK ZOOM TIMER PROG. Press [SETUP] to exit. REPEAT 0 TITLE 5 Recording Display setting Press [STOP C] if you are playing a disc. OPEN/CLOSE STANDBY-ON 1 .@/: Press [SETUP].
Changing the Setup menu Display setting (cont’d) Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. English OFF Angle Icon ON 5 minutes Screen Saver 10 minutes 10 minutes OSD Language • Using [K / L], select a setting. Press [OK]. Your setting will be activated.
Changing the Setup menu Before you start Audio setting (cont’d) A Settings for PCM (Default : 48kHz) 48kHz 96kHz Settings for Dolby Digital (Default : Stream) PCM Stream Disc Audio Dynamic Range Control Digital Out Dynamic Range Control ON ON OFF • Using [K / L], select a setting. Press [OK]. Your setting will be activated. Playing discs Dynamic Range Control (Default : ON) Set to “ON” to compress the range between soft and loud sounds. Recording • Using [K / L], select a setting.
Changing the Setup menu Video setting Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. 1 .@/: ABC Press [SETUP]. 1 2 3 GHI JKL MNO 2 Using [K / L], select “Playback”. Press [OK].
Changing the Setup menu Before you start Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. OPEN/CLOSE STANDBY-ON TIMER PROG. .@/: ABC DEF 1 2 1 3 GHI JKL MNO 4 5 Press [SETUP].
Changing the Setup menu Settings for Parental lock level (cont’d) B A password has been set already. Parental Lock Parental Lock Change password? Yes Password Input Parental Lock Yes Password Input No * * * * • Using the Number buttons, enter the current password. - - - - • Using[K / L], select “Yes”. Press [OK]. • Using the Number buttons, enter a new password. Press [OK]. Your setting will be activated. • If you select “No”, proceed to step 5. 5 Press [SETUP] to exit.
Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Remedy • Check that the AC power cord is connected securely. • (In case of power failure) Check the breaker. Picture There is no picture. • Switch the input to TV. • Connect the antenna cable correctly (page 13). Playback picture is distorted.
Others Troubleshooting (cont’d) Symptom Playback The disc does not play. EN • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CD-ROM) (page 38). • The region code on the DVD-Video does not match the unit (page 38). • Moisture has condensed inside the unit.
Others Before you start Troubleshooting (cont’d) Symptom Remedy Others The disc tray does not open when you press [OPEN/CLOSE A]. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. “Repairing” appears on the TV screen.
Others Troubleshooting (cont’d) Error message Cause Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Power Calibration Area is full. Recording Error This disc is already finalized. Recording Error The disc has a different menu layout. (Set “Replace Disc Menu” to ON to rewrite the menu.
Others Dolby Digital Regions code An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or Multi-channel audio. Regions associate discs and players with particular areas of the world. This unit will only play discs that have compatible region codes.
Others Specifications General System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format DVD-Video, DVD+RW/R, DVD-RW/R, CD-DA, CD-RW/R AC120 V, 60 Hz 20 W (standby: 1.6 W) 5.06 lbs ( 2.
Español Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos. Paso 2: Encienda la unidad. Mando a distanci ZOOM .@/: 2 3 JKL MNO 4 5 6 Seleccione la entrada a la que se conectará la unidad en su TV.
Español Fácil grabación de DVD (cont.) Paso 5: Eleccione el canal des eado. ZOOM REC MODE REV PLAY RAPID PLAY PREV PAUSE NEXT STOP CM SKIP ABC FWD DEF 1 2 3 JKL MNO 4 5 6 TUV REC TIMER PROG. GHI PQRS Paso 7: Pare la grabación. OPEN/CLOSE STANDBY-ON .@/: Paso 6: Grabe en discos DVD.
MEMO EN 79
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year PARTS: from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
Video CD CD-RW (CD-DA FORMAT, MP3 files) CD-R (CD-DA FORMAT, MP3 files) DVD+R DVD+R Double Layer DVD-RW (VIDEO mode, Finalized) The number inside the globe refers to region of the world. This unit can play DVDs that are labeled for ALL regions or for Region 1. Logo DVD+R DVD+RW Logo 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.
Easy Recording PREV RAPID PLAY STOP PAUSE PLAY CM SKIP NEXT FWD PREV RAPID PLAY STOP PAUSE PLAY CM SKIP NEXT FWD CH SETUP REPEAT CH PREV RAPID PLAY REC REV REC MODE STOP PAUSE PLAY CM SKIP NEXT FWD Stop the recording. REC REV REC MODE Record! 5 4 6 3 MNO 2 JKL 1 DEF CLEAR 9 GHI ABC 0 SPACE DISPLAY .@/: 8 7 WXYZ 6 5 TUV 4 MNO JKL GHI PQRS 3 2 1 DEF ABC .@/: Select the desired channel. REC REV REC MODE Select the recording mode.