E9TF0ED_EN.book Page 1 Wednesday, March 17, 2010 1:32 PM Introduction OWNER’S MANUAL Recording PAL SECAM Basic Setup / TV View Operation WD6D-D4413DB Connections DVD / VIDEO CASSETTE RECORDER Playback Editing Function Setup VCR Functions EN 1 Others For Customer Use: Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference. Model No. __________________________ Serial No.
E9TF0ED_EN.book Page 2 Wednesday, March 17, 2010 1:32 PM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E9TF0ED_EN.book Page 3 Wednesday, March 17, 2010 1:32 PM This product consists of materials which can be recycled and reused if disassembled by a specialised company. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or under conditions of high humidity. Do not use the unit for at least 2 hours to allow the inside to dry.
E9TF0ED_EN.book Page 4 Wednesday, March 17, 2010 1:32 PM Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
E9TF0ED_EN.book Page 5 Wednesday, March 17, 2010 1:32 PM Accessories Supplied Remote control with 2 R6 (1.5 V) batteries RF cable Owner’s Manual CD-ROM Warranty Card DVD • • • • The following features are available with this unit.
E9TF0ED_EN.book Page 6 Wednesday, March 17, 2010 1:32 PM Table of Contents Introduction ...................................................... 2 Editing ............................................................. 54 Precautions ........................................................................ 2 Guide to a Title List .......................................................... 54 Features ............................................................................. 5 Editing Discs ............
E9TF0ED_EN.book Page 7 Wednesday, March 17, 2010 1:32 PM Introduction Guide to the Owner’s Manual Symbols Used in the Owner’s Manual Symbol Connections To show what recording mode or media type applies to each function, the following symbols appear at the beginning of each operating item.
E9TF0ED_EN.book Page 8 Wednesday, March 17, 2010 1:32 PM Media for Recording / Playing Media Type DVD-RW DVD-R Logo Automatically formatted in video mode Format Can be formatted in VR or video mode Video Mode Icon Maximum Record Time VR Mode Video VR DVD-RW DVD-RW 480 min (12 cm) 144 min (8 cm) 480 min (12 cm) 144 min (8 cm) 1×-6× Recordable/Playable Ver. 1.1/1.2 Versions Ver. 1.1/1.2 CPRM compatible Available Features Playable on most DVD players. Compatibility Finalisation necessary.
E9TF0ED_EN.book Page 9 Wednesday, March 17, 2010 1:32 PM Introduction Discs for Playing Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon CD CD CD Connections DVD-V Files for Playing Type of title MP3 JPEG DivX® Icon MP3 JPEG DivX CD-RW/-R USB device CD-RW/-R USB device CD-RW/-R DVD-RW/-R USB device (not guaranteed) is a trademark of DVD Format/Logo Licensing Corporation. This unit has been designed to play DVD with region 2.
E9TF0ED_EN.book Page 10 Wednesday, March 17, 2010 1:32 PM Functional Overview Front Panel 1 2 3*1 4 21*3 19*2 17*2 16 15 14 20 18*2 13 12 5 10 11 8 9*1 7 6 You can also turn on the unit by pressing these buttons. You can turn on the unit by pressing these buttons only when a videotape is in this unit. Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.
E9TF0ED_EN.book Page 11 Wednesday, March 17, 2010 1:32 PM 19 20 21 SYSTEM (YELLOW) button (VCR) SEARCH (BLUE) button (VCR) 3 5 6 25 26 7 27 8 28 9 29 10 16 17 35 36 37 18 38 Note • If you turn off this unit, [OPEN\CLOSE EJECT A] on the remote control is not available. Be sure to use [OPEN\CLOSE A] or [STOP\EJECT C A] on the unit. VCR Functions Button names described in the Owner’s Manual The instructions in this manual are described mainly with the operations using the remote control.
E9TF0ED_EN.book Page 12 Wednesday, March 17, 2010 1:32 PM Installing Batteries in the Remote Control Install 2 R6 (1.5 V) batteries (supplied) into the remote control, carefully match with the polarity indicated inside the battery compartment. 1 2 Caution button About the Remote Control • Make sure there is no obstacle between the remote control and the remote control sensor on the unit. • Use within the operating range and angle as shown.
E9TF0ED_EN.book Page 13 Wednesday, March 17, 2010 1:32 PM Guide to On-Screen Displays Introduction Press [DISPLAY] repeatedly while the display menu is displayed to display the following information.
E9TF0ED_EN.book Page 14 Wednesday, March 17, 2010 1:32 PM INFO Menu VCR While in the VCR mode, the on screen display of the VCR mode is displayed. Press [VCR] first. Press [DISPLAY] to display the on screen display. DVB Press [C] while viewing a DVB programme to display the programme information. . 3 1 2 STEREO 3 12:00 AV2 7 6 SP 0:00:00 5 STEREO 4 This is an example screen for explanation. Displayed items are depending on the actual mode.
E9TF0ED_EN.book Page 15 Wednesday, March 17, 2010 1:32 PM Introduction Main Menu B Timer Programming Press [SETUP] to display the main menu. Then use [K \ L] to select a menu and press [ENTER\OK] to display the sub menu. Press [RETURN\BACK] to return to previous screen. To programme a timer recording. [E Page 33] C Title List To call up the title list.
E9TF0ED_EN.book Page 16 Wednesday, March 17, 2010 1:32 PM Front Panel Display Guide 1 2 DTV DB VCR 3 DVD 4 1 DTV indicator : Appears when a videotape is in this unit. : Appears when the channel is in digital mode. : Appears when a disc is in this unit. 2 Title / Track and Chapter number : : 3 DB : Title / track number Chapter number Appears during dubbing. DVD :Appears when this unit is in DVD output mode, or the timer-standby mode for DVD recording.
E9TF0ED_EN.book Page 17 Wednesday, March 17, 2010 1:32 PM Connect the unit to a TV after considering the capabilities of your existing equipment. Before installation, unplug your TV and this unit Antenna RF cable (not supplied) 1 To Aerial jack Audio IN Component video IN RF cable (supplied) Y PB/CB PR/CR IN jack of this unit. 2 Connect the ANTENNA OUT jack of this unit to the Aerial jack of your TV.
E9TF0ED_EN.book Page 18 Wednesday, March 17, 2010 1:32 PM Using an HDMI Compatible Port [HDMI CONNECTION] • HDMI outputs the video / audio signals without converting to analogue signals. • No audio connections is required. • Use the HDMI cable (commercially available) for connection. • Connect the HDMI output jack of this unit to the HDMI input jack of TV. HDMI cable (not supplied) To HDMI input jack HDMI IN this unit TV Selecting HDMI video resolution Press [HDMI] to select the HDMI video resolution.
E9TF0ED_EN.book Page 19 Wednesday, March 17, 2010 1:32 PM Recording from a DVD player, Satellite Box or other Audio-Video equipment with a Scart output socket (AV2) Digital Audio for Better Sound Quality Dolby Digital decoder, DTS decoder or MPEG decoder, etc. Digital audio input jack COAXIAL Connections This unit has three input terminals. Press [INPUT SELECT] repeatedly to select the external input mode, then press [PROG. G \ H] repeatedly to select AV1, AV2 or DV(AV3).
E9TF0ED_EN.book Page 20 Wednesday, March 17, 2010 1:32 PM Basic Setup / TV View Operation 6 Initial Setting After finishing channel setting, “Clock Setting” will appear. Clock Setting When you turn on this unit for the first time, you need to follow these steps. 1 2 01 / 01 / 2010 (FRI) 0 : 00 Press [STANDBY-ON Q]. • The current date and time will appear automatically.
E9TF0ED_EN.book Page 21 Wednesday, March 17, 2010 1:32 PM ANALOG Programme the tuner to scan only the analogue channels you can receive in your area. 2 Select “Channel” using [K \ L], then press [ENTER\OK]. Channel Setting 3 You can retune this unit or edit the channel setting with following methods. Select “ANALOG Channel Setup” using [K \ L], then press [ENTER\OK]. 4 Select “Auto Tuning” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book 6 Page 22 Wednesday, March 17, 2010 1:32 PM Select the position number you want to use using [the Number buttons] or [K \ L], then press [0]. • You can select position number 1-99. • With [the Number buttons], you only need to enter the last 2-digit numbers. 7 8 Select “System” using [K \ L], then press [1]. 9 Select “Channel” using [K \ L], then press [1]. 10 Press [K \ L] to start scanning. • The tuner will begin to search up or down automatically.
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Select “Auto Tuning” using [K \ L], then press [ENTER\OK]. Country Setting DVB The unit will start storing channels available in your area. Edit Channels Auto Tuning Manual Tuning Signal Information Channel 69 UHF 2 Select “Channel” using [K \ L], then press [ENTER\OK]. 3 Select “Country” using [K \ L], then press [ENTER\OK]. 4 Select your desired country using [K \ L], then press [ENTER\OK]. S.No.
E9TF0ED_EN.book Page 24 Wednesday, March 17, 2010 1:32 PM 4 Selecting the Audio Mode ANALOG Select “Edit Channels” using [K \ L], then press [ENTER\OK]. • “Edit Channels” menu will appear. 2 You can switch between TV audio modes by pressing [AUDIO]. Each mode is indicated on the TV screen. Edit Channels S.No.
E9TF0ED_EN.book Page 25 Wednesday, March 17, 2010 1:32 PM Delete Channels DVB DVB You can delete the DVB channels from the memorised DVB channels. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 2 Select the DVB channel you want to skip using [K \ L], then press [GREEN]. 2 Select the DVB channel you want to delete using [K \ L], then press [BLUE]. Edit Channels S.No. Channel Name 5 Fav. Skip Lock Edit Channels S.No.
30_BasicSetup.fm Page 26 Friday, April 9, 2010 4:37 PM 3 Edit Channel Names • “Signal Information” is not available for analogue channel and external input (AV1/AV2/DV(AV3)). • “Signal Information” is also not available while the Pincode input field for locked DVB channel is displayed. DVB You can edit the DVB channel names as you want. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 2 Select the DVB channel you want to edit the name using [K \ L], then press [RED].
E9TF0ED_EN.book Page 27 Wednesday, March 17, 2010 1:32 PM EPG (Electronic Programme Guide) DVB DVB Many DVB channels transmit Subtitle information along with their DVB channels. You can retrieve and display it on the TV screen. While viewing a DVB programme, press [SUBTITLE]. • If the programme has no subtitle information, “No Information.” will appear. 11:53 MON ON In stop mode, press [SETUP]. Select “Timer Programming” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 28 Wednesday, March 17, 2010 1:32 PM Recording Restrictions on Recording Information on DVD Recording Type of Discs This unit can record on DVD-RW/-R discs. DVD-RW discs allow you to record programmes repeatedly, and the recorded contents can be erased. There are 2 recording formats: VR mode and video mode. VR and video modes are available for DVD-RW discs while as only video mode is available for DVD-R discs.
E9TF0ED_EN.book Page 29 Wednesday, March 17, 2010 1:32 PM Introduction Making Discs Playable in Other DVD Players (Finalise) After recording, you must finalise the disc to play it back in other players. (See page 41.) You cannot finalise discs in other DVD recorders. Disc Type DVD-R DVD-RW Video Mode VR Mode ✔ ✔ ✔ ✔ ✔ After finalising Undo finalising (See page 41.) Additional recording or editing (See page 41.
E9TF0ED_EN.book Page 30 Wednesday, March 17, 2010 1:32 PM 4 Formatting a Disc Select your desired setting using [K \ L], then press [ENTER\OK]. Aspect Ratio (Video mode) Choosing the Recording Format of a Blank DVD-RW Disc Video Auto 4:3 16 : 9 Auto: It will be recorded with whichever the ratio that the programme you started to record is broadcasted with. 4:3 : Recorded with the aspect ratio of 4:3. 16:9 : Recorded with the aspect ratio of 16:9.
E9TF0ED_EN.book Page 31 Wednesday, March 17, 2010 1:32 PM Select “DVD Menu” using [K \ L], then press [ENTER\OK]. 3 Select “Format” using [K \ L], then press [ENTER\OK]. 4 Select “Start” using [K \ L], then press [ENTER\OK]. A pop up window will appear and prompt you to confirm. 5 Select “Yes” using [K \ L], then press [ENTER\OK]. e.g.) VR mode DVD-RW 1 In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 32 Wednesday, March 17, 2010 1:32 PM • When the unit reaches the specified time, it will be turned off automatically. • To change the recording length during One-touch Timer Recording, press [REC] repeatedly until the desired length appears. • To cancel One-touch Timer Recording within the specified time, press [STOP C]. Basic Recording and One-touch Timer Recording (OTR) DVB ANALOG Video VR DVD-RW DVD-RW DVD-R Follow the steps below to record a TV programme.
E9TF0ED_EN.book Page 33 Wednesday, March 17, 2010 1:32 PM DVB 5 Select the digital (DVB) / analogue (ATV) mode or external input (AV1/AV2) using [K \ L], then press [1]. 6 Select the channel number to record using [K \ L], then press [1]. 7 Select the recording media (“DVD” or “VCR”) using [K \ L], then press [1]. 8 Select the recording speed using [K \ L], then press [1]. ANALOG Video VR VCR DVD-RW DVD-RW DVD-R You can set the unit to record up to 12 programmes, up to a month in advance.
E9TF0ED_EN.book Page 34 Wednesday, March 17, 2010 1:32 PM Note • If you have not set the clock, the clock setting window will appear instead of the Timer Programming list. Continue from “A Clock Setting” on page 67 before programming the timer. • Press [K \ L] to move the cursor in “Timer Programming” list. • If a basic recording or One-touch Timer Recording is in progress on one component (e.g. VCR) and the timer recording set for the other component (e.g.
E9TF0ED_EN.book Page 35 Wednesday, March 17, 2010 1:32 PM E1–E22, E37–E39 Recording error E23–E24 Unrecordable disc E25/E51 • Copy prohibited programme • Cannot record because of the NTSC / PAL-60 signal is received. Copy prohibited programme E29 Disc protected If the starting time is same: • The timer programming set first (PROG. 1) has priority. PROG. 2 recording will start after PROG. 1 recording is completed. PROG. 1 PROG.
E9TF0ED_EN.book Page 36 Wednesday, March 17, 2010 1:32 PM Timer Recording (EPG) Satellite Link You can set the unit to start recording whenever it detects the video scart control from the external tuner. DVB Video VR DVD-RW DVD-RW DVD-R With EPG system, you can programme DVB channel recording much easier. You can only choose one programme and enter the selection. Refer to “EPG (Electronic Programme Guide)” on page 27.
E9TF0ED_EN.book Page 37 Wednesday, March 17, 2010 1:32 PM Introduction Note Settings for External Equipment Video Colour System When you record from external equipment or copy a videotape to a DVD disc, you can set the format Auto, PAL or SECAM. In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. 2 Select “Recording” using [K \ L], then press [ENTER\OK]. Satellite Link 3 Select “Video Colour System” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 38 Wednesday, March 17, 2010 1:32 PM When you want to record to a videotape: Press [VCR]. Insert a videotape with a record tab into the cassette compartment. 3 Select the input terminal to which the external equipment is connected (AV1 or AV2). 3 Press [DISPLAY] to display the DVC information on the screen. When the DVC is in video mode... T 1 2 1/ 1 -RW Control DV Audio Start Rec Press [INPUT SELECT] repeatedly to select the external input mode, then press [PROG.
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Status of the current operation and the time counter 4 Each icon means (Available icons may vary depending on the DVC): With “Control” highlighted, press [ENTER\OK] to display the available devices to control with the remote control of this unit. Select “DVC” using [K \ L], then press [ENTER\OK]. e.g.) DVC to DVD dubbing DVC is in stop mode. DVC is in playback mode. T 1/ 1 C 1/ 1 -RW DVC is fast forwarding. (standard speed) DVC is fast forwarding.
E9TF0ED_EN.book Page 40 Wednesday, March 17, 2010 1:32 PM • This unit will automatically stop the duplication if playback with no image detected for more than 3 minutes during VCR to DVD duplication. • If the playback sound mode of VCR is set to “STEREO”, “LEFT” or “RIGHT”, the sound mode upon dubbing is automatically switched to “STEREO”. If the playback sound mode is set to “MONO”, the sound mode upon dubbing is also “MONO”.
E9TF0ED_EN.book Page 41 Wednesday, March 17, 2010 1:32 PM VR DVD-RW To prevent accidental over-recording, editing or erasing of recordings, you can protect them using “Setup” menu. Insert a recordable disc. 1 In stop mode, press [SETUP]. Select “DVD Menu” using [K \ L], then press [ENTER\OK]. 3 Select “Disc Protect OFF A ON” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 42 Wednesday, March 17, 2010 1:32 PM Playback 9 To eject the disc, press [OPEN\CLOSE EJECT A] to open the disc tray, then remove the disc. Press [OPEN\CLOSE EJECT A] to close the disc tray before turning off the unit. Basic Playback Note for DVD Playback The contents of a DVD are generally divided into titles. Titles are further subdivided into chapters depend on Auto Chapter setting (See page 30). Start Rec. Stop Rec./Start Rec. Title 1 Press [STOP C] to stop playback.
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Press [K \ L] to select the desired track / file or folder, then press [ENTER\OK]. e.g.) Photo (JPEG) files File List DISC NAME Notes on JPEG: After file is displayed for 5 seconds or 10 seconds (set in the “Slide Show” on page 52), the display moves to the next file. During JPEG playback, press [1] or [0] to rotate a picture 90 degrees clockwise or counterclockwise respectively. (Not available when the display menu appears.
E9TF0ED_EN.book 1 Page 44 Wednesday, March 17, 2010 1:32 PM In stop mode, plug your USB flash memory. If all menu items cannot be displayed in the screen scope, the A appears at the right bottom and the R appears at the left bottom of the screen and you can view other items on the next or previous page. The track number of the items currently played back is highlighted. If the A is shown at the right bottom, use [SKIP G] to view the next page.
E9TF0ED_EN.book Page 45 Wednesday, March 17, 2010 1:32 PM DivX [DivX®] • Official DivX® Certified product • Playable Codec of AVI files : DivX®3.x, DivX®4.x, DivX®5.x, DivX®6.x • Maximum size of image : 720 x 480 @30 fps 720 x 576 @25 fps • Sampling frequency of audio : 16 kHz - 48 kHz • Audio type : MPEG1 audio layer 3 (MP3), MPEG1 audio layer 2, Dolby Digital ® This unit allows you to play back the files purchased or rented from DivX® Video-On-Demand (VOD) services.
E9TF0ED_EN.book Page 46 Wednesday, March 17, 2010 1:32 PM • You can play back the disc recorded in multi-session. • It may take awhile for audio and images to be output after you inserted a disc and pressed [PLAY B]. • When playing back the files recorded in high bit rates, the images can be interrupted in some occasions. • Although DivX® logo has been obtained for this unit, it may not be able to play back some data, depending on the characteristics, bit rates, or audio format settings, etc.
E9TF0ED_EN.book Page 47 Wednesday, March 17, 2010 1:32 PM Special Playback Video VR DVD-RW DVD-R 1 MP3 JPEG DivX ® During playback, press [STOP C]. The resume message will appear. 2 Press [PLAY B]. In a few seconds, playback will resume from the point at which you stopped it before. Even if you turn off the unit, you can resume playback at the same point after turning back on the unit.
E9TF0ED_EN.book Page 48 Wednesday, March 17, 2010 1:32 PM 3 Step by Step Playback DVD-V 1 2 Video VR DVD-RW DVD-RW The zoom area is displayed. DVD-R DivX ® 4 During playback, press [PAUSE F]. Press [SKIP H \ G] repeatedly. Press and hold [SKIP G] to continue going forward. To continue going backward, press and hold [SKIP H]. Press [PLAY B] to resume playback. Note • To cancel the zoom function, select “x1.0” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 49 Wednesday, March 17, 2010 1:32 PM Simultaneous Playback and Recording VR DVD-RW 1 During recording, press [DISPLAY]. T 1/ 5 C 1/ 5 The resume message will appear. To stop recording, press [STOP C] again. To cancel the resume, press [STOP C] again. ORG 1 TF1 Select icon using [0 \ 1], then press [ENTER\OK]. The title number next to will be highlighted. Title: Enter a desired title number to search using [K \ L] or [the Number buttons], then press [ENTER\OK].
E9TF0ED_EN.book Page 50 Wednesday, March 17, 2010 1:32 PM Search Title / Chapter Search DVD-V Video VR DVD-RW DVD-RW DVD-R Using [SKIP H \ G] buttons 1 During playback, press [SKIP G] to skip the current title or chapter and move to the next. The unit moves to the next title or chapter one after another. To go back to the previous title or chapter, press [SKIP H] twice in quick successions. Using the [DISPLAY] button 1 During playback, press [DISPLAY] to bring up the display menu.
E9TF0ED_EN.book Page 51 Wednesday, March 17, 2010 1:32 PM Repeat / Random / Programme Playback / Slide Show CD You can use this function to play back a disc randomly instead of in the recorded order. Repeat Playback Video VR DVD-RW DVD-RW DVD-R CD 1 2 MP3 JPEG DivX ® 1 3 “DISC Playback Mode” or “USB Playback Mode” menu will appear. 3 Select “Music” using [K \ L], then press [ENTER\OK] twice. JPEG files: The selected repeat playback will start. The following operations are available.
E9TF0ED_EN.book Page 52 Wednesday, March 17, 2010 1:32 PM Note • To erase tracks you selected, press [CLEAR]. • You can make up to 50 track settings. • To cancel programme playback, press [STOP C] twice during programme playback. “OFF” appears on the screen. • You may also select the desired track using [the Number buttons] at step 3. • During programme playback, if you forward the track to the end, the playback speed of the next track will be normal.
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Select a desired audio soundtrack or audio channel using [K \ L], then press [ENTER\OK]. Note DVD-V Video VR DVD-RW DVD-RW During playback, press [DISPLAY] to bring up the display menu. The angle icon appears when a switching camera angle is available. (Available only when the angle icon appears in bottom right on the TV screen.) 2 Select the icon using [0 \ 1], then press [ENTER\OK]. The angle will switch each time you press [ENTER\OK].
E9TF0ED_EN.book Page 54 Wednesday, March 17, 2010 1:32 PM Editing 1 Guide to a Title List Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [DVD], then press [TOP MENU]. 4 5 6 Title list: List of titles recorded on the disc. Each title is indicated by its index picture. Index picture for the selected title can be seen in motion.
E9TF0ED_EN.book Page 55 Wednesday, March 17, 2010 1:32 PM Editing Discs Note • It is not possible to retrieve deleted titles. Press [DVD] first. 1 Title List will appear. For VR mode DVD-RW disc, press [MENU\LIST] to switch between “Original” and “Playlist”. 2 Select the desired title with [K \ L \ 0 \ 1], then press [ENTER\OK]. Pop up window will appear. 3 Select “Title Delete” using [K \ L], then press [ENTER\OK]. e.g.
E9TF0ED_EN.book Page 56 Wednesday, March 17, 2010 1:32 PM Editing Title Name Video Guide to Editing Title Names VR DVD-RW DVD-R DVD-RW You can edit the title names from this menu. The title names you edit will appear on the title list. Press [DVD] first. 1 Step 1 : Select the desired character set using [K \ L], then press [ENTER\OK]. Step 2 : Using the list below as a guide, press [the Number buttons] repeatedly until the desired letter appears. In stop mode, press [TOP MENU].
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Select “Add” or “Delete” accordingly using [K \ L], then press [ENTER\OK]. You cannot delete the first chapter of a title. 5 Select “Yes” using [K \ L], then press [ENTER\OK]. Deleting a chapter mark: If you select “Delete” at step 4, the chapter mark you selected is deleted. 6 Press [RETURN\BACK] repeatedly to exit. Note • Maximum numbers of chapter for each media: VR mode DVD : 999 chapters per entire Playlist and Original Press [DVD] first.
E9TF0ED_EN.book 4 Page 58 Wednesday, March 17, 2010 1:32 PM Select “Yes” using [K \ L], then press [ENTER\OK]. Adding Titles to a Playlist The title is divided into two new titles with the same title names. 5 Press [RETURN\BACK] to exit. VR DVD-RW Original For VR mode DVD-RW disc, you can add a title to the Playlist as you want. Writing onto the disc starts. It may take awhile to write the data on a disc. Press [DVD] first.
E9TF0ED_EN.book Page 59 Wednesday, March 17, 2010 1:32 PM Introduction Deleting Parts of Titles VR DVD-RW You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain as it is. Press [DVD] first. 2 Select “Scene Delete” using [K \ L], then press [ENTER\OK]. 3 Use [SKIP H \ G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the start point, then press [ENTER\OK].
E9TF0ED_EN.book Page 60 Wednesday, March 17, 2010 1:32 PM Function Setup The following table is the contents which you can set and the default settings. Refer to the following table for useful operation.
E9TF0ED_EN.book Wednesday, March 17, 2010 1:32 PM Items (highlight is the default) OSD Language E Page 66 Video Out E Page 67 Auto Chapter E Page 30 General Setting Main Sub Stereo Bilingual Auto PAL SECAM Clock Set the recording audio type. (Only when the recording speed is set to “1H”.) Set the unit to finalise the disc automatically. Set a aspect ratio for video mode recording. Set the dubbing selection. Set the audio type for recording. Set the external input audio type for recording.
E9TF0ED_EN.
E9TF0ED_EN.book Page 63 Wednesday, March 17, 2010 1:32 PM Introduction General Setting Common Procedures 3 In stop mode, press [SETUP]. 5 Select “General Setting” using [K \ L], then press [ENTER\OK]. e.g.) Parental Lock item Select a desired setup using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 64 Wednesday, March 17, 2010 1:32 PM Playback Setup A General Setting A Playback A password is already set 1 Enter the current password using [the Number buttons]. A B C D E F G H Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode TV System Password Input 2-A Select “No” using [K \ L], then press [ENTER\OK]. Change Password? Yes No A Parental Lock (Default: OFF) (DVD only) “Parental Lock” level is activated.
E9TF0ED_EN.book Page 65 Wednesday, March 17, 2010 1:32 PM Settings for MP3 Surround (Default: PCM) MP3 Surround PCM PCM Stream 48kHz 96kHz 48kHz : If your amplifier / decoder is NOT compatible with 96 kHz PCM, select “48kHz”. Sound recorded at 96 kHz is down sampled to 48 kHz. : If your amplifier / decoder is compatible with 96 kHz PCM, select “96kHz”. Sound is sampled at 96 kHz. Note Note • Set to “Stream” when this unit is connected to an amplifier for MP3 Surround.
E9TF0ED_EN.book Page 66 Wednesday, March 17, 2010 1:32 PM Display Note • You can also change or switch off the subtitles on a DVD from the disc menu if it is available. • Press [CLEAR] or [0] to erase numbers entered incorrectly. • You can only select the languages supported by the inserted disc. F Angle Icon (Default: ON) (DVD only) Set to “ON” to show the angle icon during the playback.
E9TF0ED_EN.book Page 67 Wednesday, March 17, 2010 1:32 PM Video Out SCART (RGB) Component (Progressive) Component (Interlace) 2 Select “Yes” using [0 \ 1], then press [ENTER\OK]. Final confirmation window will appear. 3 Select “Yes” using [K \ L], then press [ENTER\OK] within 15 seconds. Yes No Your setting is activated. [K \ L]. Press [1] to move the cursor to the next field. If you want to go back to the previous field, press [0].
E9TF0ED_EN.book Page 68 Wednesday, March 17, 2010 1:32 PM HDMI Note • If you want to cancel “Auto Clock Setting”, select “OFF” using [K \ L], and then press [ENTER\OK] at step 1. • If “Auto Clock Setting” is “OFF”, “Timer Recording (EPG)” may not be able to perform. • The clock may set itself automatically after you connect the antenna cable to the unit and plug in the mains cable. In this case, the current time will appear on the front panel display.
E9TF0ED_EN.book Page 69 Wednesday, March 17, 2010 1:32 PM Setup A General Setting A DVB Setting You can make settings of the digital tuner from the DVB Setting. DVB Language Audio Subtitle Adult Lock Maturity Lock Language About Audio : Set the Audio language. Subtitle : Set the Subtitle language. A Adult Lock (Default: OFF) DVB 1 Select “ON” or “OFF” using [K \ L], then press [ENTER\OK].
E9TF0ED_EN.book Page 70 Wednesday, March 17, 2010 1:32 PM VCR Functions Common Procedures 1 Press [STANDBY-ON Q] to turn on the unit. To play back a tape, turn on the TV and be sure to select the input to which the unit is connected. 2 Basic Recording and One-touch Timer Recording (OTR) VCR Press [VCR].
E9TF0ED_EN.book Page 71 Wednesday, March 17, 2010 1:32 PM 3 Stop or pause the DVC where you want to start dubbing. 4 5 Play back the DVC. 0:30 8:00 Note 1:00 7:30 • Dubbing will start from where the tape is stopped. Search Index Search VCR Press [SEARCH] so that the index search menu appears. 2 Enter the number of recordings you want to skip using [the Number buttons] within 30 seconds. 3 Press [FWD D] or [REV E] to start index search.
E9TF0ED_EN.book Page 72 Wednesday, March 17, 2010 1:32 PM Other Operations VCR To cue or review picture during playback (Picture Search): Press [FWD D] or [REV E] during playback. Press it again and the unit will search in super high speed (in the LP mode only).
E9TF0ED_EN.book Page 73 Wednesday, March 17, 2010 1:32 PM Introduction Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Remedy • The unit turns on automatically 2 seconds before the timer recording. The unit does not function. • “ ” or error message appears if the operation is prohibited.
90_Others.fm Page 74 Wednesday, April 14, 2010 Symptom Remedy • Check the HDMI connection. (Check the status of the HDMI related indications.) • Check whether the connected monitor device or other device supports HDCP. (This unit will not output a video signal unless the other device supports HDCP.) • Check the setting of HDMI. • Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device.
E9TF0ED_EN.book Page 75 Wednesday, March 17, 2010 1:32 PM Remedy GENERAL • Check if all the connections are made correctly. • Check if the “Audio Out” is set correctly. (See pages 64-65.) • There is a possibility that the selected subtitle language is not supported by the disc. Digital audio setting cannot be changed to main audio (L), sub audio (R) or combination of both. • If the audio source is in the Dolby Digital format, set “Dolby Digital” setting to “PCM” in “Playback” menu.
DVD EDITING E9TF0ED_EN.book Page 76 Wednesday, March 17, 2010 1:32 PM Symptom Remedy Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by following the steps on page 57 for title protection and page 41 for disc protection. Dubbing cannot be executed. • When the number of the titles or the chapters exceeds the maximum recordable number, the dubbing will not be executed. Titles cannot be edited or deleted.
E9TF0ED_EN.book Page 77 Wednesday, March 17, 2010 1:32 PM Cause Introduction Error message Solution • You are trying to record onto the DVD-RW / -R disc on which the number of recorded titles has reached the maximum (99). • Delete unnecessary original titles. (See page 55.) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) • You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999).
E9TF0ED_EN.
90_Others.fm Page 79 Tuesday, May 11, 2010 10:08 PM Introduction Specifications General Four heads Power requirements 220–240 V Power consumption 35 W ± 10 %, 50 Hz ± 0.5 % Power consumption (standby) 0.93 W Weight 5.0 kg Dimensions (width x height x depth) 435 x 99.
99_BackCover.fm Page 80 Tuesday, May 11, 2010 10:09 PM Declaration of Conformity This product complies with the requirement of the related directives. We: FUNAI ELECTRIC EUROPE Sp. z o.o. ul. Inżynierska 1, 67-100, Nowa Sól, Poland declare that the following product: DVD / Video Cassette recorder Model WD6D-D4413DB Trade Name: Funai is in compliance with the related regulations. Web Site: http://www.funai.eu © 2010-2011 FUNAI ELECTRIC All rights reserved. Printed in P.R.C.
