Owner`s manual

31
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
3 Press [DISPLAY] to display the DVC information
on the screen.
When the DVC is in video mode...
When the DVC is in camera mode...
The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the dubbing
information.
1DV icon
2 Indicator of active device
• With “Control” highlighted, press [ENTER] to display the
available devices to control with the remote control of
this unit. Select the device you want to operate using
[K \ L], then press [ENTER].
- Select “DVD” to control this unit with the remote control
of this unit.
- Select “DVC” to control your DVC with the remote
control of this unit.
3 Recording audio mode
• “DV Audio” can be changed. With “DV Audio” selected,
press [ENTER] to display “DV Audio” menu. Select the
audio you want to output using [K \ L], then press
[ENTER].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was added after
the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4 Command menu
• “Start Rec” or “Pause Rec” will appear.
5 External input channel
6 Product name of your DVC
• If the unit cannot recognise the input signal from the
DVC or if it is the unknown product, “No Device” or “****”
will appear instead.
7 Status of the current operation and the time
counter
Each icon means (Available icons may vary depending on
the DVC):
DVC to DVD Dubbing
Before recording from DVC, see page 19 for connection
instructions. (See page 63 for DVC to VCR Dubbing.)
Press [DVD] first.
1 Press [AUX G \ H] repeatedly to select
DV(AV3).
2 Press [REC SPEED] to select a recording
speed. (See page 21.)
3 Press [DISPLAY].
The following instructions are described with the
operations using the remote control of this unit.
DV
AB-1234
0:12:34
1/ 1 1/ 1
D VD 2H 2:00
- R W VR ORG
2
3
1
4
T C
Cont r ol D VD
D V A udio Stereo1
Sta r t Rec
DV
AB-1234
0:12:34
1/ 1 1/ 1
- R W VR ORG
D VD 2H 2:00
7
5
6
T C
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding. (standard speed)
DVC is fast forwarding. (faster than above)
DVC is fast forwarding. (faster than above)
DVC is slow forwarding. (standard speed)
DVC is slow forwarding. (faster than above)
DVC is slow forwarding. (faster than above)
DVC is fast forwarding. (in stop mode)
DVC is fast reversing. (in stop mode)
DVC is fast reversing. (standard speed)
DVC is fast reversing. (faster than above)
DVC is fast reversing. (faster than above)
DVC is in slow reverse playback.
DVC is in recording.
DVC is in recording pause mode.
Please also read the operating instructions of your
DVC for more information.
Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
DVD-RDVD-RDVD-R
AB-1234
0:00:00
DV
E9RF0FH_EN.book Page 31 Friday, May 16, 2014 7:17 PM