Owner`s manual

34
EN
To cancel finalising (DVD-RW disc only):
At step
4, press [STOP C]. Select “Yes” using [K \ L],
then press [ENTER]. Finalising is cancelled and the unit
switches to stop mode.
If “ ” appears when [STOP C] is pressed, you cannot
cancel finalising because the finalising has already
reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is pressed,
finalising is continued.
You cannot cancel finalising a DVD-R disc once it has
started.
5 Finalising is complete.
Note
• Finalising a disc in video mode automatically creates a Title
menu.
• After you finalise DVD-RW/-R disc, you can edit or record
only on a video mode disc.
• To release the finalisation of the disc, select “Undo Finalise”
at step
3.
• If you insert a DVD-RW disc finalised with this unit,
“Undo Finalise” will appear instead of “Finalise”.
• DO NOT power off during finalising. This may result in a
malfunction.
You can finalise discs automatically when the disc space runs
out if you set this in “Setup” menu.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER].
2 Select “Recording” using [K \ L], then press
[ENTER].
3 Select “Auto Finalise” using [K \ L], then press
[ENTER].
4 Select “ON” using [K \ L], then press [ENTER].
5 Press [SETUP] to exit.
Note
• Auto finalise function is not available for discs formatted in
VR mode disc.
Auto Finalise
10%
Do you want to cancel?
Yes
No
Finalising
DVD-RWDVD-RWDVD-RW
Video
DVD-RDVD-RDVD-R
Auto Finalise
ON
OFF
E9RF0FH_EN.book Page 34 Friday, May 16, 2014 7:17 PM