Owner`s manual

40
EN
Special Playback
You can resume playback from the point where you stopped it
before.
1 During playback, press [STOP C].
The resume message will appear.
2 Press [PLAY B].
In a few seconds, playback will resume from the point at
which you stopped it before. Even if you turn off the unit,
you can resume playback at the same point after turning
back on the unit.
To cancel the resume playback and start playing back the
disc from the beginning:
Press [STOP C] while playback is stopped.
Note
For MP3 and JPEG files, playback will resume from the
beginning of the track at which playback was stopped.
1 During playback, press [FWD D] or [REV E].
Each time you press [FWD D] or [REV E], the
approximate speed will change as follows.
Fast forward or fast reverse playback across titles (for
DVDs) or tracks / files (for MP3 / DivX
®
) is not possible.
For audio CDs and MP3 files approximate speed is fixed
at 8x with sound.
•For DivX
®
files, approximate forward speeds are 2x, 20x
and 40x, and approximate reverse speeds are 5x, 20x
and 40x.
To return to playback at normal speed, press [PLAY B].
Picture quality of DivX
®
files in fast reverse is lower than
that in fast forward.
•For some DivX
®
files, Fast forward/Fast reverse may not
function.
Note
Forward / reverse speeds are indicated with icons as follows.
Forward (Approx. Speed):
2x:
20x:
40x:
Reverse (Approx. Speed):
5x:
20x:
40x:
To enjoy recorded programmes without any interruptions,
press [CM SKIP].
1 During playback, press [CM SKIP].
Normal playback will start 30-second advanced point from
the point at which you press [CM SKIP].
Each time you press [CM SKIP], the start point will move
another 30 seconds forward and playback resume
automatically.
You can press [CM SKIP] up to 6 times (180 seconds).
1 During playback, press [PAUSE F].
Playback will pause with the sound muted.
2 Press [PLAY B] to resume playback.
Rapid Playback function is available only during
playback.
Available only on discs recorded in the Dolby Digital format,
Rapid Playback plays back in a slightly faster/slower speed
while keeping the sound output.
1 During playback, press [1.3x\0.8x PLAY].
2 Press [PLAY B] to return to the normal
playback.
Note
Audio (language) setting cannot be changed while using this
mode.
This feature may not work at some point in a disc.
Audio is PCM during Rapid Playback mode.
When you select “PAL” in “TV System” (see page 59), this
function is not available with discs recorded using the NTSC
system.
Resume Playback
Fast Forward / Fast Reverse
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
CDCDCD
MP3MP3MP3
JPEGJPEGJPEG
DivXDivX
®
DivX
®
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
CDCDCD
MP3MP3MP3
DivXDivX
®
DivX
®
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
20x 2x 20x5x 40x40x
Normal
speed
playback
Skipping TV Commercials during
Playback
Pause
Rapid Playback
B :Press [1.3x\0.8x PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B :Press [1.3x\0.8x PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B :Press [1.3x\0.8x PLAY] thrice to play back in
normal speed.
No effects.
DVD-VDVD-VDVD-V
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
DVD-VDVD-VDVD-V
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
CD
CD
CD
MP3MP3MP3
JPEGJPEGJPEG
DivX
DivX
®
DivX
®
DVD-VDVD-VDVD-V
DVD-RWDVD-RWDVD-RW
Video
DVD-RWDVD-RWDVD-RW
VR
x0.8
x1.3
E9RF0FH_EN.book Page 40 Friday, May 16, 2014 7:17 PM