Owner`s manual

59
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Note
• You can also change or switch off the subtitles on a DVD
from the disc menu if it is available.
•Press [CLEAR] or [0] to erase numbers entered
incorrectly.
• You can only select the languages supported by the
inserted disc.
Set to “ON” to show the angle icon during the playback.
Note
• An individual picture on TV screen is called as Frame,
which consists of two separate images called as Field.
Some pictures may be blurred at the “Auto” setting in still
mode due to their data characteristics.
Note
• With discs recorded using the PAL system, a PAL signal
is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be viewed
on an NTSC system TV.
• With discs recorded using the NTSC system, an NTSC
signal is output for viewing on an NTSC or Multi system
TV.
• With discs recorded using the NTSC system, select PAL
to view on a PAL system TV.
Setup A General Setting A Display
Set the OSD language.
Set for the auto power off function. When this function is
set to “ON” and this unit has been inactive for 3 hours, a
confirmation message will be displayed 3 minutes before
the unit is automatically turned off.
Set the screen saver time delay.
Set the front panel display brightness.
Note
• The display will not light up when the unit is in standby
mode.
This is a Power Saving mode (ECO) for standby.
F Angle Icon (Default: ON) (DVD only)
G Still Mode (Default: Auto) (DVD only)
Auto : Automatically select the best resolution setting
(“Frame” or “Field”) based on the data
characteristics of the pictures.
Field : Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the limited
amount of data.
Frame : Select “Frame” to display relatively motionless
pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilise
the pictures due to simultaneous output of two
Field data.
H TV System (Default: PAL) (DVD only)
PAL : Outputs a modified PAL signal for viewing discs
recorded with the NTSC system on a PAL system
TV.
Auto : Changes the video system (PAL / NTSC)
automatically according to the format of the
inserted disc.
Angle Icon
ON
OFF
Still Mode
Auto
Field
Frame
TV System
PAL
Auto
Display
A OSD Language (Default: French)
B Auto Power Off (Default: ON)
C Screen Saver (Default: 10 minutes)
D FL Dimmer (Default: Bright)
A
B
C
D
OSD Language
Auto Power Off
FL Dimmer
Screen Saver
OSD Language
Áúëãàðñêè
English
Èesky
Français
Deutsch
Magyar
Nederlands
Auto Power Off
ON
OFF
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Bright
Dark
E9RF0FH_EN.book Page 59 Friday, May 16, 2014 7:17 PM