、 Bluetooth Headset Brand Name: the Boom Model Name: the Boom-W FCC ID: VJ2THEBOOM-W
Bluetooth Headset Instruction Manual Key definitions: multi-function key (S2) Bluetooth function operation 1) Turn on: In power off mode, switch the button to the ON position, the blue LED flashes with an indication tone. 2) Turn off: In standby mode, Switch the button to the OFF position, the red LED flashes 3 times with an indication tone.
increase the volume, short press VOL- botton to decrease the volume, (you will hear an indication tone when decrease to minimum volume or increase to maximum volume) 10).Last number redial: In the standby mode, long press VOL+ botton will dial the last outgoing number. 11).Voice dial: Connect the mobile phone, in the standby mode, short press the S2 botton to start voice dial.
Link loss if exceed 10M), the headset will re-connect to mobile phone if back to effective range within about 10 minutes. (The headset will be shut down if two mobile phones continuous disconnected after 10 minutes at the same time, and only once disconnect tone in the beginning) c.