User's Manual

Bluetooth Headset Instruction Manual
Key definitions: multi-function key (S2)
Bluetooth function operation
1) Turn on: In power off mode, switch the button to the ON position, the blue LED flashes with
an indication tone.
2) Turn off: In standby mode, Switch the button to the OFF position, the red LED flashes 3 times
with an indication tone.
3) Pairing: Switch to the ON position, hold the S2 botton for about 6 seconds until the red and
blue LEDs flash alternately, indicating that the Bluetooth is in searching and matching state.
you can operate your bluetooth-enabled mobile phone to match.you will hear an indication
tone when paired.
(Second phone pairing : If have already connected with the other mobile, hold the " VOL -"
about 3 seconds to enter pairing mode, activate the dual-link functions after connected, please
refer to the follow operations to activate the dual-link function, and then manually connect the
first mobile phone)
4) Connection: Connect your phone to the Bluetooth speaker after paired.
5) Answer a call: After connect succeed, short press the S2 botton to answer an incoming call.
6) End a call: When the call is connected successfully, short press the S2 botton to hang up with
an end indication tone.
7) Reject a call: Connect the mobile phone, hold the S2 botton for about 3 seconds to reject call,
you will hear an indication tone.
8）End a call: During a call, short press the S2 botton to hang up.
9）Adjust the volume: when answering, dialing or during a call, short press VOL+ botton to