bintec WI1040n and WI2040n Industrial Access Points Hard to beat o 802.11n industrial access point configurable as AP, WDS repeater, WLAN client, bridge o Dual band 2.
Optimize your WLAN network by using a bintec WLAN controller. The bintec WLAN controller allows configuration of your customers WLAN network in lesser than 30 minutes ... and this without deeper WLAN know-how! The automatic RF management system relieves you the time killing search for free WLAN channels and selects the best channels for the system. For smaller WLAN networks up to 6 APs the WI1040/WI2040 is able to take over the function of the WLAN controller by itself and works as quasi master AP.
Versions Feature Description WI1040n One Dualband Radio, for Indoor usage protection class IP40, three removeable antennas; part number 5010590006 WI2040n Two Dualband Radios, for Indoor usage protection class IP40, four removeable antennas; part number 5010590007 Security Feature Description Encryption WEP/WPA WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise IEEE802.11i authentication and encryption 802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.
Wireless LAN Features Feature Description WLAN standards 802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h Frequency bands 2.4 GHz indoor/outdoor (EU) 2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. This information is related to the permitted transmission power in Germany. The permitted transmission power may vary in other countries. Frequency bands 5 GHz indoor (EU) 5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed.
value is 32 clients. Country-specific settings Channel settings according regulatory domain (802.11d) permitted. TPC TPC (transmission power control): For 5 GHz, automatic reduction of transmission power according EN301893 DFS DFS (dynamic frequency selection): For 2.4 and 5 GHz, channels are dynamically used depending on operating grade. DFS is implemented in bridge links master and slave.
Maintenance and Service Feature Description Configuration a. maintenance: Device configuration Configuration via a. maintenance: SNMP Telnet, SSH, HTTP, HTTPS, SNMP Configuration a. maintenance: SNMP configuration Configuration a. maintenance: SSH Complete management with MIB-II, MIB 802.11, enterprise MIB Login Configuration a. maintenance: HTTP/HTTPS Web-based configuration (FCI). The user interface is identical with almost all Funkwerk products.
Software Features Feature Description Roaming (access point mode) Seamless roaming with IAPP (artem Inter Access Point Protocol) Fast roaming 802.1x (access point mode) Roaming behaviour (client mode) Pre authentication and PMK caching allows fast roaming by 802.
Hardware Features Feature Description Certifications Wi-Fi Certified according 802.11abgn (Rel.7.9.4) Standards and certifications R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 60950-22; EN 301489-1; EN301489-17; EN 55022; EN 300328-1; EN 301893; EN 302502; EN 50371 Medical standards and certifications (only WIx040n) Railway and automotive standards EN 60601-1; EN 60601-2; EN 55011 and certifications (only WIx040n) Wifi Certification Wifi Certified product according IEEE 802.
