Antenna Overview Version 3.
Contents ANT-Ceiling-Mimo-2G for 802.11n AP ANT-Omni-4-dual Order No.: 5510000209 .........................................................................................................3 Order No.: 600529 ..............................................................................................................................................4 ANT-Omni-vehicle-1.2m Order No.: 600519......................................................................................................................
ANT-Ceiling-Mimo-2G for 802.11n AP Order No.: 5510000209 This antenna can be used in suspended ceilings for 2x3 Mimo Access Points (i.e. W1002n) as ceiling antenna that fits perfect in office areas. The antenna contains two antenna systems there are 90º twisted again each other and allows the transmission of two streams. Two streams allows up to 300Mbit/s PHY rate. Mounted at the ceiling of a room the antenna directed the signal under approx. 60° downwards.
ANT-Omni-4-dual Order No.: 600529 Description This antenna features omni directional radiation and has a gain of 4 dBi. The antenna is equipped with an N jack and always requires an adapter cable from N to RTNC or RSMA, depending on the device to which it is connected. Due to its special characteristics, it can be used in either of the two frequency bands by merely switching the frequency at the W1002n or WI-Series. This means that the user can freely select the frequency band he or she prefers, e.g.
ANT-Omni-vehicle-1.2m Order No.: 600519 Description: This antenna features omni directional radiation and has a gain of 5 dBi. It is particularly suitable for vehicle mounting. Using its 1.2 m cable, it can be connected directly. If required, the cable can be extended with optionally available RTNC cables. With the help of an adapter to RSMA, this antenna can also be operated at devices with RSMA jack.
ANT-RTNC.S-O-STD-2+5G Order No.: 600487 Description: This antenna is a replacement standard antenna for devices with RTNC connector, such as W1002n or WiSerie,. It is swivel-mounted and can easily be adjusted to the desired position. Features: Item Order No. Range Frequency band VSWR Gain Connector Dimensions Color Operating temperature Storage temperature ANT-RTNC.S-O-STD-2+5G 600487 Line of sight approx. 300 m, indoors approx. 30 m 2400 MHz –2500 MHz / 4900 MHZ -5900 MHZ < 2.0 1.7 dBi RTNC plug approx.
ANT-Omni-5-2G-1.2m Order No.: 600518 Description: This antenna features omnidirectional radiation and has a gain of 5 dBi. The antenna is equipped with a cable length of 1.2 m and can thus be positioned at some distance from the access point in order to improve the transmission and reception properties and to make optimum use of the antenna diversity. If the 1.2 m cable is not long enough, it can be extended with optionally available RTNC cables.
ANT-Omni-8-Dual Order No.: 5510000234 Description: This antenna is an Indoor/Outdoor antenna for 2.4 GHz and 5 GHz. The antenna is suitable for smaller distances up to several hundred meters, depending on the desired data rate.
ANT-N-20-5G-dualpol for 802.11n Bridge Links Order number: 5500000551 Description: This 5 GHz Dual Polarization antenna is suitable for directional links in combination with 802.11n units there transmit two streams. The antenna contain two independent antenna systems, the polarization of these systems are 90º twisted again each other. It has a gain of 20 dBi and a beam angle of 10°, which permits targeted transmission.
WLAN-Bridgelink-Bundle Order No.: 5510000226 Description: The WLAN Bridge Link Bundle “Out-of-the-Box” is designed for wireless wireless bridging of radio links in outdoor environments. The Bundle contain all required components to setup a radio link by using the new 802.11n technology. The usage of the components is sense full for radio links with up to 6 km distance. The follow components are contains: Quantity 2 4 4 4 2 Order No.
WLAN-Outdoor Bridgelink-Bundle Order No.: 5510000271 The WLAN Outdoor Bridge Link Bundle “Out-of-the-Box” is designed for wireless bridging of radio links in outdoor environments. The bundle contains all required components to setup a radio link by using the new 802.11n technology. This outdoor bundle contains two bintec WI1065n devices, which can be mounted directly at the antenna pole. The WI1065n access points are water protected and allow operation in temperature ranges between -25° C and +65° C.
ANT-D-8/11-dual-0.2m Order No.: 600512 Description: This dual-band band antenna is mainly suited for indoors and directional links. It can be used e.g. for corridors, tunnels or outdoor links of up to a few hundred meters. me ters. It is very small and light and can mounted on walls, masts, and glass surfaces, such as windows, using various mounting materials. At the full transmission rate of 54 Mbps, up to 100 m can be covered in the 5 GHz frequency band, and 500 m using the 22.
ANT-N-D-13/15-dual Order No.: 600513 Description: This antenna is a component of an antenna solution for 2.4 GHz and 5 GHz point-to-point point point connections for coupling sites via WLAN. Due to its special characteristics, it can be used in either of the two frequency bands by merely switching ching the frequency at the W1002n or the WI series.. This means that the user can freely select the frequency band he or she prefers, e.g. if there are interfering applications in the 2.4 GHz band.
ACC-EMP-N-dual Order No.: 600499 Description: This overvoltage protector is used to largely prevent overvoltages from the outside from harming the electronics and the network, e.g. in the case of a thunderstorm. It is designed for up to 6 GHz and can therefore easily be used for systems from 2 GHz to 5 GHz. With its N plug and N jack, it can be placed between the RTNC-N cable and other N cables.
Low-Loss antenna cables The antenna cables made from Low-Loss ULA/LMR400 coaxial cables and suitable for outdoor installations. The cables meet the demand of the Funkwerk Access Points and antennas. The connectors are mounted with water protected shrink material.
