Operating instructions
Table Of Contents
- Table of contents
- Description 1
- Safety notes 1
- Symbols 3
- Operation 4
- Making phone calls 4
- Making outside calls 4
- Specific trunk bundle selection 5
- Making internal calls 5
- Accepting calls 5
- Accepting calls (Pick-up) 5
- Defining your own number for the next call 6
- Switching call authorization for the next call 7
- Trunk group reservation 7
- Speed dialing from the telephone directory 7
- Voice announcement 7
- Switching a voice announcement for all numbers (day / night) 8
- Announcement 8
- Room monitoring 8
- Malicious call identification (Tracing) 9
- Allocating Project Numbers 9
- (keypad-function »Net fixed«) 10
- Sending a fax from a multi-function terminal 10
- Direct dial-in 10
- Inquiry call 10
- Call waiting 11
- Transferring calls with and without advance notice 12
- (Explicit call transfer) 13
- Broker’s call 13
- Three-party conference 13
- Call forwarding 14
- Silent signalling 14
- Call modes (Day- / Night) 15
- Teams 15
- Activating the switching function for an internal subscriber 16
- Follow me 16
- Block dialing (Austria) 17
- Hotel functions 18
- Wake-up call 18
- Door intercom device 19
- Modified code numbers 21
- Communication / Call charges 22
- Terminating an Internet connection from the phone 22
- System menu for the PABX 22
- System telephones 23
- Service 24
- Configuration using a telephone (administrators) 30
- Index
- A
- B
- C
- Call
- Call modes 15
- Call modes for teams 15
- Call rerouting 14
- Call switching in the network (ECT) 13
- Call waiting 11
- Charge counter 22
- Charge limit 22
- Charge limitation 22
- code numbers, modified 21
- Communication cost display 22
- Communication costs 22
- Communication data 22
- Completion of call (automatic)
- Conference 13
- Configuration 24
- Configuring wake-up call from »Reception desk phone« 18
- Configuring wake-up calls from the room phone 18
- D
- E
- F
- I
- K
- L
- M
- N
- O
- P
- R
- S
- Service 24,25
- Service access 24
- Service-Connection, incoming 25
- Service-Connection, outgoing 24
- Setting up call forwarding from an external location 16
- Signaling features 19
- Silent signalling 14,22
- Speaking alternatively with two parties 13
- Speaking simultaneously with two parties 13
- Specific trunk bundle selection 5
- Speed dialing from the telephone directory 7
- Switching all call modes 15
- Switching call authorization temporarily 7
- Symbols 3
- system menu 22
- System parked inquiry 11
- System telephones 23
- T
- Teams 15
- Telephone directory 7
- Temporarily suppressing transmission of your own number 7
- Terminating an Internet connection from the phone 22
- Three-party conference 13
- Tracing (Malicious call identification) 9
- Transfer a call 12
- Transferring a call 12
- Transferring the existing call using analog telephones 12
- Trunk group seizure 5
- U
- V
- W
(Explicit call transfer)
Connecting
Please note that ISDN terminal devices can only utilize the feature »Connect« via a special key or menu function. The
following procedure applies only to analog telephones.
g Youare conductinga call with party 1.
Afurther callis signaled, for example by call waiting.
R2 Dial this code.
Party 2 answers; you canspeak with Party 2Party 1is put on hold.
R4 You would like to connect the two parties with one another.
Dialthis code.
Thetwopartiesarethenconnected.Thechargesfortheconnectionarebilledtothepartywhoestablishedtheconnection.
Broker’s call
g Youare conducting a call and wish to speak to a further party, without the first caller being able to hear your conversation
withthe second caller.
R Press the R key.
Youwill hear the internal dial tone.
t Ifyou wish to speak to an external party, dial 0 first.
Dialthe numberof the party youwish to call.
Youwill hear the ringing signal in your handset.
Theparty willbe called.
Theparty beingcalled lifts up the handset of his/her phone.
g Youare conductingthe call.
Thefirst callis put on hold.
R2 Dial this code to return to your first caller; the second party is put on hold. You can then use this code to switch back and
forth between the two callers.
or
R0 You canend the call that is onhold.
Dialthis code.
or
R1 You canend the current call.
Dialthis code.
If you switch back and forth between an internal caller and an external party (broker’s call) and then hang up your
handset, your call is terminated and the two callers will be connected with one another!
If you switch back and forth between two external parties (broker’s call) and then hang up your handset, the current
call is terminated and the caller on hold will call you by way of the »Recall«.
If, during a broker’s call, you press the R key and then dial 4, the two external parties are connected with one another
and your call with both of the external parties is terminated. The charges for the call that you initiated will be billed to
you.
Three-party conference
g Youare conductinga call with one party and wish to includea further party in the call.
R Press the R key.
Youwill hear the internal dial tone.
Ifyou wish to speak to an external party, dial 0first.
(Explicit call transfer) Operation
13